Wavegarrick's HGI Trading

Post by **Wavegarrick** » Mon Mar 30, 2020 12:27 pm

taipan » Mon Mar 30, 2020 1:36 pm wrote:
Wavegarrick » Mon Mar 30, 2020 6:28 pm wrote:Hi Taipan,

Thanks for your feedback. I did not have much of an issue on my computer, however I take note of your issue. It is always good to have your platform running lite with as little memory usage as possible. I am now looking at going back to Thomas's original ubd/usd Hgi set files and not using the Ubd Hgi caller set.

Just need a bit of time to get rid of the old cobwebs and need to go back and read up.

Any other ideas saving on resources are welcome.

Cheers
Leon
Hi Leon,

I had tried different loading methods as follow:
1. Load the TDesk EA first on chart, no issue here.
2. Load the TDesk Trading Partner EA v4h also no problem.
3. Finally load the TDesk UBD templates from which I have set it up manually. Also no problem.
4. Load preset file for TDesk EA from your set file. Now the problem comes, it freezed the Empty4 platform. Tried to force it shut down via task manager and restarted it, also the same problem, freezed the Empty4.

Now I gave up of trying. Sorry that I could not help to set them up for testing.

Taipan,
Well other than me trying to give back something that could be of help to folks here. Lets try this before giving up.

UBD template1:

UBD 1.tpl

What it should look like

Screenshot_14.png

UBD template2:
This is for the USD set file I set up for a lower cpu footprint.

UBD 2.tpl

What It should look like

Screenshot_15.png

Perhaps giving my version of the trading partner Ea will help.

TDesk Trading Partner EA.mq4

TDesk Trading Partner EA.ex4

My set file in the previous post to be used with the attached trading partner Ea.
Finally this is what TDesk should look like

Screenshot_16.png

I just cannot see what else is needed for this to work for you.
Perhaps someone else can give their input.
Cheers
Leon

Post by **Wavegarrick** » Mon Mar 30, 2020 12:29 pm

Ok perhaps our replies are overlapping

Glad its working for you now. Thanks for helping out Taipan.
Cheers
Leon

Post by **taipan** » Wed Apr 01, 2020 10:54 am

Blank_M1_on_TDesk_EA.png

Hi Leon,

May I ask what is the use of Blank/M1 on the TDesk EA ? What are the signals that it switches on/Off on

NullifyDirectionalSignals=Blank1/M1
ExcludeFromSoloSignals=Blank1/M1
ExcludeFromMultiSignals=Blank1/M1

Thanks

taipan

Post by **Wavegarrick** » Wed Apr 01, 2020 2:20 pm

taipan » Wed Apr 01, 2020 12:54 pm wrote:Hi Leon,

May I ask what is the use of Blank/M1 on the TDesk EA ? What are the signals that it switches on/Off on

NullifyDirectionalSignals=Blank1/M1
ExcludeFromSoloSignals=Blank1/M1
ExcludeFromMultiSignals=Blank1/M1

Thanks

taipan

Hi Taipan,

You can delete those inputs as they were for the Hgi caller set. No need for it now.

Cheers.

Post by **taipan** » Wed Apr 01, 2020 2:27 pm

Wavegarrick » Wed Apr 01, 2020 10:20 pm wrote:
taipan » Wed Apr 01, 2020 12:54 pm wrote:Hi Leon,

May I ask what is the use of Blank/M1 on the TDesk EA ? What are the signals that it switches on/Off on

NullifyDirectionalSignals=Blank1/M1
ExcludeFromSoloSignals=Blank1/M1
ExcludeFromMultiSignals=Blank1/M1

Thanks

taipan
Hi Taipan,

You can delete those inputs as they were for the Hgi caller set. No need for it now.

Cheers.

Hi Leon,

Thanks for the answer.

cheers,
taipan

Gitarrain · Post by **Gitarrain** » Mon Apr 06, 2020 7:26 pm

Wavegarrick » Mon Mar 30, 2020 11:34 am wrote:Ok It is a very simple fix and solution guys, thanks to Thomas's post on page 44. It does exactly the same as my MTF HGI Wavegarrick Bars TD V2 indicator and UBD Hgi caller set. Remove the indicator from your indicator folder so that the template does not pick it up.

Load the following set file to your TDesk universal signals drone (USD) indicator:

I have now done the same thing and my cpu usage has dropped dramatically.

This should solve all issues there may be.

Cheers
Leon

Hi Leon,

I use the USD HGI Leon.set to load HGI_v17.00,, but it popup too much alerts, how did you turn off the alert function?

Thanks,
Gitarrain

Post by **Wavegarrick** » Tue Apr 07, 2020 8:27 am

Hi Gitarrain,

I use Hgi_v16.09, nevertheless it should make no difference. I get no pop up alerts. The only reason I can think of is that you have Hgi running on open charts and you haven't disabled or set your alerts to false.

Cheers,
Leon

geojalencar · Post by **geojalencar** » Tue Apr 07, 2020 9:02 am

Hello good people.

How can I turn off the solar wind alert in the UBD indi?

Post by **Wavegarrick** » Tue Apr 07, 2020 2:06 pm

geojalencar » Tue Apr 07, 2020 11:02 am wrote:Hello good people.

How can I turn off the solar wind alert in the UBD indi?

Hi J.Alencar,

Yes those alerts are quite annoying. Even if you have alerts set to false and re compile the solar winds indicator, the alerts still come up. Something I did try was to delete or comment out line 132 to 151 in the code. It compiles with 3 errors, but the indi still seems to work and don't give you anymore alerts. Have not tested it over a period though to establish if it is a fix or not. Perhaps some coder will be able to help.

Cheers
Leon.

Post by **SteveHopwood** » Tue Apr 07, 2020 4:09 pm

Wavegarrick » Tue Apr 07, 2020 2:06 pm wrote:
geojalencar » Tue Apr 07, 2020 11:02 am wrote:Hello good people.

How can I turn off the solar wind alert in the UBD indi?

Hi J.Alencar,

Yes those alerts are quite annoying. Even if you have alerts set to false and re compile the solar winds indicator, the alerts still come up. Something I did try was to delete or comment out line 132 to 151 in the code. It compiles with 3 errors, but the indi still seems to work and don't give you anymore alerts. Have not tested it over a period though to establish if it is a fix or not. Perhaps some coder will be able to help.

Cheers
Leon.

Point me to it Leon and I will have a look.