HGIMatrix

sudhindragk · Post by **sudhindragk** » Fri Dec 19, 2014 12:14 pm

Thank you very much Al.

sudhindragk · Post by **sudhindragk** » Fri Dec 19, 2014 12:23 pm

Rene/ Al,

I have checked it for a while ....real time updates are accurate no issues on the matrix.

Thanks a ton for the lovely tool.

Regards
Sudhindra

Post by **alorente** » Fri Dec 19, 2014 12:26 pm

sudhindragk » Fri Dec 19, 2014 1:23 pm wrote:Rene/ Al,

I have checked it for a while ....real time updates are accurate no issues on the matrix.

Thanks a ton for the lovely tool.

Regards
Sudhindra

So far I find it is accurate with 15.06 as long as you don´t reload the Matrix or the charts. If you do, it will load the repainted arrows again. If you reload the Matrix but not the chart, they won´t match. The best thing is to leave both charts and Matrix alone, don´t change TF or reload.

And Sudhindra, it is not a lovely tool... It is a Lethal Weapon.

eevra · Post by **eevra** » Fri Dec 19, 2014 1:19 pm

Thanks a lot. It works gr8.
more stable...

renexxxx » Wed Dec 03, 2014 1:40 am wrote:This was originally posted in nanningbob's HGI thread, but I was getting PMs with change requests and I didn't want to pollute the HGI thread with irrelevant stuff.

So, here is the HGIMatrix:

Select your time frame (can be CURRENT -- so it follows the chart time frame) and whether you want to look at the current candle or closed candle. You can change some cosmetic stuff as well -- you'll work it out.

Make sure you have the named HGI indicator in your \Indicators folder as well.

In a next version, I might differentiate between the buffer7 wavey symbol and buffer8 wavey symbol -- but for the moment I just follow what Elixe is doing on the HGI indicator.

Have fun!

Edit: You can now switch AlertsOn = true, to be alerted each time a new signal arrives. Be prepared to be annoyed by this thing, especially if UseClosedCandle = false, as in this case you will likely have a new signal every minute.
Also, you can display some legends to describe what each symbol means -- not that anyone needs that.

Edit2: Added NotificationsOn switch. You must have entered your MetaQuotes ID in the Notifications-tab of Options. Be ready to be blasted by your phone ...

Edit3: Added the ability to display the most recent signal, not just the one on the open or previous candle.

Edit4: Waves are now high or low, depending on the postion of the wave in HGI. The cell contents now scales with the cell width and height.

Edit5: Added 'selectable' Alerts, to allow the trader to which type of signals and/or waves he or she wishes to be alerted. New parameters:

AlertOnTrendChange :: Gives an alert if a new TREND signal was spotted
AlertOnRangeChange :: Gives an alert if a new RANGE signal was spotted
AlertOnRadChange :: Gives an alert if a new RAD signal was spotted
AlertOnWeakWave :: Gives an alert if a new WEAK Wave signal was spotted
AlertOnStrongWave :: Gives an alert if a new STRONG Wave signal was spotted.

The whole Alert and Notification mechanism can still be switched on/off with AlertsOn and NotificationsOn as before. Also, if AlertsOn is true, but none of the other 'AlertOn....' flags is true, you still won't get any alerts.

Edit6: Two small changes: The tile that was changed in the last refresh, turns dark red and there is now an external parameter for the SymbolFont (default: WingDings)

Edit7: A new parameter, ShowAsList, allows the information to be arranged vertically in a list.

Edit8: Made the fonts a little smaller as we got reports that some text was cut off. Also, locked the screen height with a new parameter (ScreenHeight: default 720), to by-pass the problem of getting all the rows on one line in the list form.

Edit9: I was advised by Elixe that for version 15.01, the iCustom call needs to be different. This has been updated in this version.

Edit10: Added the MTF version of HGIMatrix. Set the TimeFrames parameter to a comma-separated list of known timeframes, eg. 5,15,60,240.
Note: be sensible with your numbers. Having 28 pairs with 5 timeframes, 8 buffers and max lookback of 100 requires a maximum of 112,000 iCustom calls! This is done every minute ... You will find that at the start you get quite a few 'red' cells ... This is probably due to the HGI-indicator still trying to load some more data. This settles down after a while. Have fun and let me know how you go.

Edit11: There are some minor cosmetic changes as suggested by trendinator. There are now parameters to set the colour of the wave-symbols, as well as the background color of the changed cell. Also the wording of the Alerts() has been changed.

Edit12: New version of HGIMatrixMTF allows to change the background color of a symbol by clicking on the cell.

Edit13: Two minor updates: The cell selections now survive Empty4-restarts, timeframe changes and indi re-initializations. Also, I have made HGI 15.06 the default HGI indicator.

Ben12 · Post by **Ben12** » Fri Dec 19, 2014 2:11 pm

Hi Renexx

Thanks for this great "Lethal Weapon".
Alorente posted this on the HGI thread:
"For the past 10 days I have been testing the Hurst filter as posted by pedro2. It is extremely successful as a filter of not so good trades.

At some point, we may want to include the filter in the code of HGI and offer it as a selectable option.

I will not take a trade if Hurst doesn´t agree. It is practically infalible. You don´t miss any trades by using it. You are always offered a better entry later that is in agreement with Hurst.

Thanks Pedro for sharing it with us."

In case such a filter is not added to the HGI...is there any chance you can add the filter to the matrix to only show:
-HGI buy signals when Hurst TMAC5 < TMAC11
-HGI sell signals when Hurst TMAC11 < TMAC5

Thanks
Ben

Post by **DoctorGremlin** » Fri Dec 19, 2014 5:06 pm

Wow Rene, simply wow.
This Thing is just great.
It would be ultimately perfect if there buttons for each pair with which we could open it and load on a template automatically. I know it is possible to insert Buttons on the Empty4 charts, but i don't know if it is possible to open charts and load a template in that way. It would be great so we don't have to Keep the charts open all the time.

Post by **alorente** » Fri Dec 19, 2014 5:15 pm

DoctorGremlin » Fri Dec 19, 2014 6:06 pm wrote:Wow Rene, simply wow.
This Thing is just great.
It would be ultimately perfect if there buttons for each pair with which we could open it and load on a template automatically. I know it is possible to insert Buttons on the Empty4 charts, but i don't know if it is possible to open charts and load a template in that way. It would be great so we don't have to Keep the charts open all the time.

You don´t need to have the all charts open all the time. Below is my screen. I drag the pairs from the Market Watch strip on the extreme left on to any of my 5 charts and the chart changes to the new pair instantly.

Post by **Gertje** » Fri Dec 19, 2014 7:29 pm

DoctorGremlin » Fri Dec 19, 2014 5:06 pm wrote:Wow Rene, simply wow.
This Thing is just great.
It would be ultimately perfect if there buttons for each pair with which we could open it and load on a template automatically. I know it is possible to insert Buttons on the Empty4 charts, but i don't know if it is possible to open charts and load a template in that way. It would be great so we don't have to Keep the charts open all the time.

If you save the template as default, it will open that way.

Foreverforex · Post by **Foreverforex** » Fri Dec 19, 2014 7:59 pm

alorente » Fri Dec 19, 2014 9:15 am wrote: You don´t need to have the all charts open all the time. Below is my screen. I drag the pairs from the Market Watch strip on the extreme left on to any of my 5 charts and the chart changes to the new pair instantly.

Al, previously you had said:

"So far I find it is accurate with 15.06 as long as you don´t reload the Matrix or the charts. If you do, it will load the repainted arrows again."

Isn't dragging pairs onto an open chart the same as closing and re-opening a chart or changing TF? This method isn't effecting your signals?

Post by **alorente** » Fri Dec 19, 2014 8:48 pm

Foreverforex » Fri Dec 19, 2014 8:59 pm wrote:
alorente » Fri Dec 19, 2014 9:15 am wrote: You don´t need to have the all charts open all the time. Below is my screen. I drag the pairs from the Market Watch strip on the extreme left on to any of my 5 charts and the chart changes to the new pair instantly.
Al, previously you had said:

"So far I find it is accurate with 15.06 as long as you don´t reload the Matrix or the charts. If you do, it will load the repainted arrows again."

Isn't dragging pairs onto an open chart the same as closing and re-opening a chart or changing TF? This method isn't effecting your signals?

You are correct, but currently we are testing a new Matrix that runs its own library and it is free from iCustom, so maybe I was jumping the gun a bit with my comments. The new Matrix will not be affected by reloads. It may be ready next week to see the light. As far as the charts, you are correct again. I only drag the pairs on to my Extreme TMA chart on the right side screen. I should have been more specific about this.

Thanks for your comment.