Here is the result for past two days using GridMaster to offset trades placed by RnR and HGBnG M5. It's a positive result although surprisingly the independently offsetting demo delivered far more. I've written a detailed post in the RnR thread but wanted to post my results here relating to GridMaster in case there is any interest to pursue this further...TraderJoeForex » Wed Jul 06, 2016 3:26 pm wrote:
ahhh thanks Rene. I didn't receive the original PM but I have now you resent. Perhaps my mailbox was full at the time. I really appreciate this.
What I will do is keep the demo I have running with independent offsetting and setup a new one tonight with offsetting disabled on each of the HGBnG EA's and RnR and use GridMaster for the closing.
We can then compare both side by side. If it looks worthwhile at the end of this week I will setup a new thread over the weekend to invite further thoughts / testing and refinements to this idea since it embodies work from three separate threads.
GridDancer / GridMaster
- TraderJoeForex
- Trader
- Posts: 1157
- Joined: Fri Mar 08, 2013 10:29 pm
- Location: South London
GridDancer / GridMaster
You do not have the required permissions to view the files attached to this post.
- TraderJoeForex
- Trader
- Posts: 1157
- Joined: Fri Mar 08, 2013 10:29 pm
- Location: South London
GridDancer / GridMaster
Thinking about this last night there is one more thing I am going to try here. Using GridDancer with directional bias alongside RnR on the same account with collective offsetting between the two.TraderJoeForex » Fri Jul 08, 2016 6:11 pm wrote:
Here is the result for past two days using GridMaster to offset trades placed by RnR and HGBnG M5. It's a positive result although surprisingly the independently offsetting demo delivered far more. I've written a detailed post in the RnR thread but wanted to post my results here relating to GridMaster in case there is any interest to pursue this further...
You do not have the required permissions to view the files attached to this post.
- TraderJoeForex
- Trader
- Posts: 1157
- Joined: Fri Mar 08, 2013 10:29 pm
- Location: South London
GridDancer / GridMaster
This test has been quite interesting with significantly less draw down than my RnR/HGBnG combo during the 1000pip move on GBPJPY so far this week.TraderJoeForex » Sat Jul 09, 2016 6:13 pm wrote:
Thinking about this last night there is one more thing I am going to try here. Using GridDancer with directional bias alongside RnR on the same account with collective offsetting between the two.
I realized that I can run a much higher lot size safely on Grid dancer as it is not such a trading tart as HGBnG (on M5) so will need to let this run for the rest of the week to get a balanced picture on the equity but for now closed trades looks good. I am just using a 240MA on M1 as the directional guide for GridDancer which seems to be working well.
I am also going to separate the offsetting so that RnR and GridDancer are just managing their own to see what difference this makes.
You do not have the required permissions to view the files attached to this post.
Last edited by TraderJoeForex on Fri Jul 15, 2016 3:07 pm, edited 1 time in total.
-
Haggadah
- Trader
- Posts: 154
- Joined: Sat Dec 03, 2011 12:01 pm
GridDancer / GridMaster
TJF,TraderJoeForex » Wed Jul 13, 2016 12:42 pm wrote:This test has been quite interesting with significantly less draw down than my RnR/HGBnG combo during the 1000pip move on GBPJPY so far this week.
I realized that I can run a much higher lot size safely on Grid dancer as it is not such a trading tart as HGBnG (on M5) so will need to let this run for the rest of the week to get a balanced picture on the equity but for now closed trades looks good. I am just using a 240MA on M1 as the directional guide for GridDancer which seems to be working well.
On the directional bias, the Grid Dancer is silent if MA is used. Its is up, down, both or get automatic direction. How did you do it?
I have been following most of your post but find it difficult to understand. I am confused.
Haggadah.
- TraderJoeForex
- Trader
- Posts: 1157
- Joined: Fri Mar 08, 2013 10:29 pm
- Location: South London
GridDancer / GridMaster
GetAutomaticDirection (from MADDY) and I have just been using 240EMA on M1Haggadah » Fri Jul 15, 2016 2:05 pm wrote:
TJF,
On the directional bias, the Grid Dancer is silent if MA is used. Its is up, down, both or get automatic direction. How did you do it?
I have been following most of your post but find it difficult to understand. I am confused.
Haggadah.
You do not have the required permissions to view the files attached to this post.
- TraderJoeForex
- Trader
- Posts: 1157
- Joined: Fri Mar 08, 2013 10:29 pm
- Location: South London
GridDancer / GridMaster
TraderJoeForex » Fri Jul 15, 2016 3:06 pm wrote:
GetAutomaticDirection (from MADDY) and I have just been using 240EMA on M1
Magic 3 is GridDancer/Master .. looking good at the start of this week
You do not have the required permissions to view the files attached to this post.
- TraderJoeForex
- Trader
- Posts: 1157
- Joined: Fri Mar 08, 2013 10:29 pm
- Location: South London
GridDancer / GridMaster
Testing GridDancer against HGBnG has been interesting this week.
HGBnG with GridMaster closing has performed best and also better than another test I am running with HGBnG offsetting on it's own.
Magic 1 HGBnG Long
Magic 2 HGBnG short
Magic 3 GridDancer.
(1001 - 1003 are different versions of RnR I am also testing independently)
I used a separate version of GridMaster for HGBnG and GridDancer trades.
HGBnG with GridMaster closing has performed best and also better than another test I am running with HGBnG offsetting on it's own.
Magic 1 HGBnG Long
Magic 2 HGBnG short
Magic 3 GridDancer.
(1001 - 1003 are different versions of RnR I am also testing independently)
I used a separate version of GridMaster for HGBnG and GridDancer trades.
You do not have the required permissions to view the files attached to this post.
- renexxxx
- Trader
- Posts: 860
- Joined: Sat Dec 31, 2011 3:48 am
GridDancer / GridMaster
You are definitely going somewhere with this. Let me know if I can be of any assistance.TraderJoeForex » Fri Jul 22, 2016 5:24 am wrote: HGBnG with GridMaster closing has performed best and also better than another test I am running with HGBnG offsetting on it's own.
- TraderJoeForex
- Trader
- Posts: 1157
- Joined: Fri Mar 08, 2013 10:29 pm
- Location: South London
GridDancer / GridMaster
Cheers Rene.. I have so many tests running at the moment I need to try and condense the results into something logical and will PM you over the weekend.renexxxx » Thu Jul 21, 2016 7:45 pm wrote:
You are definitely going somewhere with this. Let me know if I can be of any assistance.
- renexxxx
- Trader
- Posts: 860
- Joined: Sat Dec 31, 2011 3:48 am
GridDancer / GridMaster
I got a PM from chimoong from Malaysia (Welcome to the Forum, chimoong!) that went like this:
Thank you Chimoong for your first contribution!
Edit:
Below are the results after putting this on a demo account for four hours during the Asian session: Will need much more testing to draw any conclusions ...
I thought that this was novel idea ... and it only required a few small changes to GridDancer ... So, in Post 1, you will find GridDancerv1.54. Let's see if we can keep the Balance-Equity-Gap under control with this new Dancer.chimoong wrote: ...
I would like to suggest:
1) Ignore the imbalance mission / jobs.
2) The EAs should be able to "memorise" the LATEST current open and closed profit trades (technically I don't know whether this can be done), for example, EURUSD = buy (LATEST profit position), AUDCHF = sell (LATEST profit position), EURGBP = sell (LATEST profit position), USDJPY = buy (LATEST profit position), etc. For the GridDancer to place orders, it only places buy orders for EURUSD, sell orders for AUDCHF, sell orders for EURGBP, buy orders for USDJPY, etc. but will NOT place any opposite direction of entry orders. Of course, the GridDancer's behaviour of placing orders keeps on changing all the times, all depends on its latest "memory".
Thank you Chimoong for your first contribution!
Edit:
Below are the results after putting this on a demo account for four hours during the Asian session: Will need much more testing to draw any conclusions ...
You do not have the required permissions to view the files attached to this post.