TDesk Discussion

[szfxtrader]

Hi Thomas,

First of all I would like to thank you again for your hard work and support. I am using the new version(2.1) with only one indicador(SS Baluda) and I've noticed that sometimes the Bid price is coming as 0.0000(please take a look at the attached picture), could you please take a look at it? Thank you very much for your help.

All the best,
Marcelo

[tomele]

Hi @all.

@Leon

I see what John is saying. If you have the chart on the 4 hr t/frame it does not show the hourly on the dashboard but shows the 4hr and daily time frame on the dash. It will only show if you have the chart on the hourly t/frame. If you have the chart on the daily timeframe it shows the 4 hr and daily timeframe on the dashboard.

I can't reproduce that here. It shows all three GHL timeframes in TDesk, no matter what I set the trade chart timeframe to.

@Navzar929

Will there be in the future buttons for buy, sell, close trade, and even SL, TP, BE, TS?
I will pay any amount for a monster like that!

No, it will become an auto-trader.

@John

And even with 3 times attached, they are not being read together as a collective signal, but then, could be me and my settings.

It is not supposed to. You get the collective reading for each symbol by enabling "Solo Signals".

@Marcelo

I am using the new version(2.1) with only one indicador(SS Baluda) and I've noticed that sometimes the Bid price is coming as 0.0000(please take a look at the attached picture), could you please take a look at it? Thank you very much for your help.

I will try to address that. Anyone else experienced it?


Cheers
Thomas

[lbs48]

Hi to all, master Thomas especially.

Endless thanks for the new TD version.
I have light trouble with RSI 2MA TD V2 - working fine with 1H or 4H (on 1H chart).
But when I set 1D, nothing showing and Empty4 have error massage:
RSI 2MA TD V2 AUDCAD,H1: array out of range in 'RSI 2MA TD V2.mq4' (183,76)

Any idea where there may be an error?

Many thanks in advance.
Lubos

[Cred]

I have light trouble with RSI 2MA TD V2 - working fine with 1H or 4H (on 1H chart).
But when I set 1D, nothing showing and Empty4 have error massage:
RSI 2MA TD V2 AUDCAD,H1: array out of range in 'RSI 2MA TD V2.mq4' (183,76)

Any idea where there may be an error?

Many thanks in advance.
Lubos

This sounds like a data related issue. I have had similar error messages with other indicators before. Have you tried downloading the history again for the pair?

[alecsa72]

Very impressed so far, fantastic work, Thomas!

Been running it since Monday, swapping from V1.5 to V2 during the week

Zero Empty4 errors of any kind detected during 4 days, which is in itself is a great achievement for such complex work.

Using the default template from this thread

http://www.stevehopwoodforex.com/phpBB3 ... 32#p164047

with minor modifications - I reduced the "multi" signals to 50/25 and "solo" signals to 80/60, since I found that higher values almost never give signals. All 28 pairs are activated, performance is spectacular, even with all charts open!

I open orders manually during the day as advised by TDesk, check the status in the evening or next morning, and close orders in bulk, if decent enough profit had been reached.

Here is the snapshot so far. GBPNZD was the only substantial loser, but it was easily offset by combined winners from all other pairs. It's a demo account with $85k equity, so equity gain is only shows 0.1%, since I only use 0.01 lots.

Capture.PNG

[Navzar929]

Hi :hi:
Please tell me the indicators that you use for all the info in the snapshot you posted.
Thank you in advance! Newbie here

Very impressed so far, fantastic work, Thomas!

Been running it since Monday, swapping from V1.5 to V2 during the week

Zero Empty4 errors of any kind detected during 4 days, which is in itself is a great achievement for such complex work.

Using the default template from this thread

http://www.stevehopwoodforex.com/phpBB3 ... 32#p164047

with minor modifications - I reduced the "multi" signals to 50/25 and "solo" signals to 80/60, since I found that higher values almost never give signals. All 28 pairs are activated, performance is spectacular, even with all charts open!

I open orders manually during the day as advised by TDesk, check the status in the evening or next morning, and close orders in bulk, if decent enough profit had been reached.

Here is the snapshot so far. GBPNZD was the only substantial loser, but it was easily offset by combined winners from all other pairs. It's a demo account with $85k equity, so equity gain is only shows 0.1%, since I only use 0.01 lots.

[alecsa72]

Hi :hi:
Please tell me the indicators that you use for all the info in the snapshot you posted.
Thank you in advance! Newbie here

Very impressed so far, fantastic work, Thomas!

Been running it since Monday, swapping from V1.5 to V2 during the week

Zero Empty4 errors of any kind detected during 4 days, which is in itself is a great achievement for such complex work.

Using the default template from this thread

http://www.stevehopwoodforex.com/phpBB3 ... 32#p164047

with minor modifications - I reduced the "multi" signals to 50/25 and "solo" signals to 80/60, since I found that higher values almost never give signals. All 28 pairs are activated, performance is spectacular, even with all charts open!

I open orders manually during the day as advised by TDesk, check the status in the evening or next morning, and close orders in bulk, if decent enough profit had been reached.

Here is the snapshot so far. GBPNZD was the only substantial loser, but it was easily offset by combined winners from all other pairs. It's a demo account with $85k equity, so equity gain is only shows 0.1%, since I only use 0.01 lots.

I downloaded all indicators mentioned in this thread

http://www.stevehopwoodforex.com/phpBB3 ... 106&t=5527

And applied the TDesk.tpl template as per this thread (with my own minor adjustments)

http://www.stevehopwoodforex.com/phpBB3 ... 106&t=5532

[Navzar929]

Thank you, but I meant the ones in the account info screenshot. One of them is the equity analyzer, but I want to know the other two, the one with all the trades and the other one with the profit and loss.
Thanks again

[alecsa72]

Thank you, but I meant the ones in the account info screenshot. One of them is the equity analyzer, but I want to know the other two, the one with all the trades and the other one with the profit and loss.
Thanks again

there are only 2 indicators there

The top one is the TradeReport can be found here

http://www.stevehopwoodforex.com/phpBB3 ... =95&t=3893

[Navzar929]

Thank you!