Yet Another Dashboard for 10.4

[atharmian]

yamez,

Thanks for this... will try after failing with 1.07a too many times

I am not a coder, but wondering- is there a way to add CSS to it, especially closing quickly if CSS changes per Andy's (MrLong's) newest Final EA version 1.10? Also, from latest NB musings, I see that CSS has become integral, replacing Stoch-AO.

Do I need to use the 'old' DLL version from Post#2, or would the latest from mt4gui.com also work?

Cheers,
Athar.

I have hard coded YAD104 version 1.06 to only give 240 LWA and RSI 2 signal alerts. Email alerts and alert at close of the bar as default, you can change this. Stochastic and AO are still displayed.

Version 1.06 has no options to disable Stochastic and AO and although version 1.07a has options to do this, they do not work.

You could probably modify version 1.07a too but that DLL version crashes my Empty4 spectacularly and I haven't bothered to do this.

[atharmian]

yamez,

Used the 'new' DLL version from mt4gui.com to display the following from a few minutes ago:

1. Should this be a typical display for NB 10.4 H4 trades?

2. All the RSI2's show BBBB, but not Stochs? What do the 4 RSI2 BBBB mean?

3. What is the interpretation of potential trades? E.g., GBPAUD at bottom of Column 1?
Does this imply, potential trade based on AO and RSI, with a pending buy stop at R1?

4. My column #2 does not show any potentials. Is this because the screen got cut off? Any remedies?

Again, thanks for this.

Athar.

yamez,

Thanks for this... will try after failing with 1.07a too many times

I am not a coder, but wondering- is there a way to add CSS to it, especially closing quickly if CSS changes per Andy's (MrLong's) newest Final EA version 1.10? Also, from latest NB musings, I see that CSS has become integral, replacing Stoch-AO.

Do I need to use the 'old' DLL version from Post#2, or would the latest from mt4gui.com also work?

Cheers,
Athar.

I have hard coded YAD104 version 1.06 to only give 240 LWA and RSI 2 signal alerts. Email alerts and alert at close of the bar as default, you can change this. Stochastic and AO are still displayed.

Version 1.06 has no options to disable Stochastic and AO and although version 1.07a has options to do this, they do not work.

You could probably modify version 1.07a too but that DLL version crashes my Empty4 spectacularly and I haven't bothered to do this.

[yamez]

Hi Athar,

I don't think yad 1.06 needs the DLL to work.

Make sure 10.4 RSI2_on_NT_TMA.mq4 is installed. See post 2 on this thread. Maybe thats why your RSI signals are off. You shouldn't have are those T and B's.

The meaning of the T and B symbols are explained in post 1, under dashboard meanings.

Cheers.

[atharmian]

yamez,

I do have 10.4 RSI2_on_NT_TMA.mq4 installed, and always have had this BBBB problem in other Dash versions as well (other folks have reported this too.) Anyway...

Athar.

Hi Athar,

I don't think yad 1.06 needs the DLL to work.

Make sure 10.4 RSI2_on_NT_TMA.mq4 is installed. See post 2 on this thread. Maybe thats why your RSI signals are off. You shouldn't have are those T and B's.

The meaning of the T and B symbols are explained in post 1, under dashboard meanings.

Cheers.

[pino]

Hi guys!

I'm trying to install YAD on my Empty4 platform but i keep receiving the "Cannot open file... " error.

yad error.JPG

I installed the Empty4.gui files and copied the YAD104_v1.07a.mq4 to experts folder, but can't seem to get it working.

Can you please advise?

Regards,
Pino

[Antonio]

Hi guys!

I'm trying to install YAD on my Empty4 platform but i keep receiving the "Cannot open file... " error.

yad error.JPG

I installed the Empty4.gui files and copied the YAD104_v1.07a.mq4 to experts folder, but can't seem to get it working.

Can you please advise?

Regards,
Pino

I had the same issue, to address - open MetaQuotes Language editor and compile YAD104....mq4. Then drag it back on the chart and remember to enable the dlls and EA in options. You will notice under Navigator it was grey out before you compile. Hope this helped.

Anton

[tommm]

v107a - is glitchy for me.
sometimes one chart button - change TF then all chart buttons but Stoch tick box is gone.
sometimes no text only chart buttons - change TF x1 or x2 MT crashes

The same problem with v107a (Win8 Empty4 build 482 mt4gui.dll version 2.0.033)

Tom

Today downloaded mt4gui.dll version 2.0.033 from http://www.mt4gui.com/. Version the same, but file size different, old one 3 201 568 bytes, new 2 032 672 bytes. With New YAD10.4 v107a works fine.

Tom

[niepce]

Just a drop by to say thank you to candletiger.
Your dashboard is awesome.

[whizzher]

yamez,

Used the 'new' DLL version from mt4gui.com to display the following from a few minutes ago:

1. Should this be a typical display for NB 10.4 H4 trades?

2. All the RSI2's show BBBB, but not Stochs? What do the 4 RSI2 BBBB mean?

3. What is the interpretation of potential trades? E.g., GBPAUD at bottom of Column 1?
Does this imply, potential trade based on AO and RSI, with a pending buy stop at R1?

4. My column #2 does not show any potentials. Is this because the screen got cut off? Any remedies?

Again, thanks for this.

Athar.

yamez,

Thanks for this... will try after failing with 1.07a too many times

I am not a coder, but wondering- is there a way to add CSS to it, especially closing quickly if CSS changes per Andy's (MrLong's) newest Final EA version 1.10? Also, from latest NB musings, I see that CSS has become integral, replacing Stoch-AO.

Do I need to use the 'old' DLL version from Post#2, or would the latest from mt4gui.com also work?

Cheers,
Athar.

I have hard coded YAD104 version 1.06 to only give 240 LWA and RSI 2 signal alerts. Email alerts and alert at close of the bar as default, you can change this. Stochastic and AO are still displayed.

Version 1.06 has no options to disable Stochastic and AO and although version 1.07a has options to do this, they do not work.

You could probably modify version 1.07a too but that DLL version crashes my Empty4 spectacularly and I haven't bothered to do this.

Hello fellow traders!

I am new here. fantastic dashboard. Yamez and Atharmian: I got it fixed becoz i checked the filenames wich i had in my folder with the filenames the EA wants. I changed them so they match. This resolved the BBBB issue. And dont forget the slopeTMA indicator from the orginal 10.4. I hope you can fix in your dashboard. Mine works. Tx 4 all

[atharmian]

Whizzher,

Sounds fantastic and thanks for the post !

Now can you kindly give details, e.g., the relevant file name changes needed, and that
TMA Slope indi ? Was this particular one a different version needed?

Cheers,
Athar.

yamez,

Used the 'new' DLL version from mt4gui.com to display the following from a few minutes ago:

1. Should this be a typical display for NB 10.4 H4 trades?

2. All the RSI2's show BBBB, but not Stochs? What do the 4 RSI2 BBBB mean?

3. What is the interpretation of potential trades? E.g., GBPAUD at bottom of Column 1?
Does this imply, potential trade based on AO and RSI, with a pending buy stop at R1?

4. My column #2 does not show any potentials. Is this because the screen got cut off? Any remedies?

Again, thanks for this.

Athar.

yamez,

Thanks for this... will try after failing with 1.07a too many times

I am not a coder, but wondering- is there a way to add CSS to it, especially closing quickly if CSS changes per Andy's (MrLong's) newest Final EA version 1.10? Also, from latest NB musings, I see that CSS has become integral, replacing Stoch-AO.

Do I need to use the 'old' DLL version from Post#2, or would the latest from mt4gui.com also work?

Cheers,
Athar.

I have hard coded YAD104 version 1.06 to only give 240 LWA and RSI 2 signal alerts. Email alerts and alert at close of the bar as default, you can change this. Stochastic and AO are still displayed.

Version 1.06 has no options to disable Stochastic and AO and although version 1.07a has options to do this, they do not work.

You could probably modify version 1.07a too but that DLL version crashes my Empty4 spectacularly and I haven't bothered to do this.

Hello fellow traders!

I am new here. fantastic dashboard. Yamez and Atharmian: I got it fixed becoz i checked the filenames wich i had in my folder with the filenames the EA wants. I changed them so they match. This resolved the BBBB issue. And dont forget the slopeTMA indicator from the orginal 10.4. I hope you can fix in your dashboard. Mine works. Tx 4 all