| stevehopwoodforex.com https://www.stevehopwoodforex.com/phpBB3/ Print view |
|
| Bob's Biggest Balls Ever https://www.stevehopwoodforex.com/phpBB3/viewtopic.php?t=1375 |
Page 15 of 26 |
| Author: | McNish [ Wed Jan 16, 2013 2:57 pm ] |
| Post subject: | Re: Bob's Biggest Balls Ever |
@ Frank : Thanks for the info. I had cross checked with Paul's Slope Values indi and the result was the same, no display on Auto:F, but good on True for my demo crim. But on another crims platform, display shows for either T/F on the slope indi. So it's more of an typical crim issue than a bug in the code. @ Lifesys : So the solution worked for you I guess ? Apart from that, mine has not taken any trade today though there have been some. Then again, maybe timing has something to do here. Or does the EA take trades as soon as it it set and not wait for a right timing of the market and let missed trades be missed trades. Yesterday, while I was trying around with the inputs of BBBE and getting futile attempts, at one instance, it took two trades immediately. Since then no luck at any trades. But my query stands, Does the EA take trades immediately after it is get to go or does it wait for the right market timing? |
|
| Author: | Wiggy1965 [ Thu Jan 17, 2013 12:45 am ] |
| Post subject: | Re: Bob's Biggest Balls Ever |
Hi Steve, I think this has been discussed however I'm in a Kiwi short scalp at the moment and was receiving the following two errors.... 07:36:16 Bob's Biggest Balls Ever1g USDSEK,M5: Bob's Biggest Balls Ever1g 2766182 TradeManagementModule stop loss modification failed with error 1: no error 07:36:16 Bob's Biggest Balls Ever1g USDSEK,M5: Alert: Bob's Biggest Balls Ever1g 2766182 TradeManagementModule stop loss modification failed with error 1: no error As the trade was profitable i add a trailing stop and the error changed to the following... 07:14:16 Bob's Biggest Balls Ever1g USDSEK,M5: Alert: Bob's Biggest Balls Ever1g 2766182 TradeManagementModule stop loss modification failed with error 1: no error 07:14:16 Bob's Biggest Balls Ever1g USDSEK,M5: Bob's Biggest Balls Ever1g 2766182 TradeManagementModule stop loss modification failed with error 1: no error I hope this helps... Paul |
|
| Author: | ovisun [ Thu Jan 17, 2013 1:48 pm ] |
| Post subject: | Re: Bob's Biggest Balls Ever |
Hi, I set only trend trades to true and scalp to false, but still opened scalp trades. Regards. |
|
| Author: | SteveHopwood [ Thu Jan 17, 2013 6:10 pm ] |
| Post subject: | Re: Bob's Biggest Balls Ever |
V 1h is in post 1. Somehow the 'P' on the table morphed into a "|". No idea how. fmuir brought this up and provided the fix. A bit more relevant is a change to the code that enforces a wait until all new D1 candles have formed. As previously coded, BBBE would sulk if your crim does not offer a pair you had forgotten to remove from your symbolsToTrade input. Fixed in 1h.  |
|
| Author: | bazze [ Thu Jan 17, 2013 9:41 pm ] |
| Post subject: | Re: Bob's Biggest Balls Ever |
2013.01.17 22:37:28 Bob's Biggest Balls Ever(h) CADJPY,M15: symbol name for MarketInfo function must be a string What does this mean? |
|
| Author: | SteveHopwood [ Thu Jan 17, 2013 10:25 pm ] |
| Post subject: | Re: Bob's Biggest Balls Ever |
Nice one. Thanks. I typed some code in the wrong order. Fixed in V 1i in post 1. Those of you who prefer the editing approach, to to void WaitForAllD1CandlesToForm() Find the line of code that is AllFormed = true; (line 845) The following line of code needs to be: Code: Select all |
|
| Author: | bazze [ Thu Jan 17, 2013 10:34 pm ] |
| Post subject: | Re: Bob's Biggest Balls Ever |
Must say that you are pretty fast...Thank you very much,Steve |
|
| Author: | Wiggy1965 [ Fri Jan 18, 2013 3:03 am ] |
| Post subject: | Re: Bob's Biggest Balls Ever |
Steve, Still getting the below error on a EURAUD 10.3 Scalp trade that i have just entered... 13:48:01 Bob's Biggest Balls Ever1i USDZAR,H1: Alert: Bob's Biggest Balls Ever1i 27857975 TradeManagementModule stop loss modification failed with error 1: no error 13:48:01 Bob's Biggest Balls Ever1i USDZAR,H1: Bob's Biggest Balls Ever1i 27857975 TradeManagementModule stop loss modification failed with error 1: no error This is my BBBE Set File... eai=----EA inputs---- ShowIndiTable=1 ShowUsualChartFeedback=1 SetFileName=All Sessions ThisInstanceIsMaster=1 CriminalIsECN=0 sct=----10.3 scalp trading---- ScalpTrading=1 ScalpLot=0.01000000 ScalpTakeProfitPips=50 ScalpStopLossPips=20 ScalpMagicNumber=191 ScalpTradeComment=10.3 scalp MaxScalpSpread=5.00000000 ssl=--Slope for scalping-- ScalpSlopeTF=240 ScalpBuyLevel=0.00000000 ScalpSellLevel=0.00000000 jui=----Jump inputs---- JumpScalpTrades=1 JumpTrendTrades=1 JumpIncrementPips=10 NegativeIncrementPips=0 PositiveIncrementPips=100 trt=----10.2A trend trading---- TrendTrading=1 MaxTrades=6 EnforceTriplePivotIntegrity=1 TrendLot=0.01000000 TrendTakeProfitPips=200 TrendStopLossPips=100 TrendMagicNumber=192 TrendTradeComment=10.2A Trend MaxTrendSpread=10.00000000 tsl=--Slope for Trending-- TrendSlopeTF=1440 TrendBuyLevel=0.40000000 TrendSellLevel=-0.40000000 ttm=--Trend trade management-- BE=Break even settings BreakEven=1 BreakEvenPips=50.00000000 BreakEvenProfit=10.00000000 HideBreakEvenStop=0 PipsAwayFromVisualBE=100.00000000 JSL=Jumping stop loss settings JumpingStop=1 JumpingStopPips=50.00000000 AddBEP=0 JumpAfterBreakevenOnly=1 HideJumpingStop=1 PipsAwayFromVisualJS=100.00000000 pcbe=PartClose settings can be used in pcbe1=conjunction with Breakeven settings PartCloseEnabled=0 Close_LotsFract=0.50000000 trh=----Trading hours---- tr1=tradingHours is a comma delimited list tr1a=of start and stop times. tr2=Prefix start with '+', stop with '-' tr2a=Use 24H format, local time. tr3=Example: '+07.00,-10.30,+14.15,-16.00' tr3a=Do not leave spaces tr4=Blank input means 24 hour trading. tradingHours= opf=----Optional filters---- adxin=--Adx-- UseFilter_ADX=1 ADXAvPeriod=14 UseH1ADX=1 H1ADXThres=0 UseH4ADX=1 H4ADXThres=0 UseD1ADX=1 D1ADXThres=0 UseW1ADX=1 W1ADXThres=0 FilterReversals=1 ADXReverseThres=15 doj=--Doji-- UseFilter_Doji=1 DojiFractPercent=65 bf=----Trading balance filters---- UseZeljko=1 OnlyTradeCurrencyTwice=1 pts=----Swap filter---- CadPairsPositiveOnly=1 AudPairsPositiveOnly=1 NzdPairsPositiveOnly=1 OnlyTradePositiveSwap=0 amc=----Available Margin checks---- sco=Scoobs UseScoobsMarginCheck=0 fk=ForexKiwi UseForexKiwi=1 FkMinimumMarginPercent=1500 mis=----Odds and ends---- DisplayGapSize=0 ind=-----Indicator inputs----- autoSymbols=0 symbolsToTrade=GBPJPY,EURAUD,GBPUSD,EURJPY,AUDJPY,USDJPY,EURUSD,AUDNZD,NZDUSD,AUDUSD,EURGBP,XAUUSD autoSuffix=1 sortSymbolNames=1 addSundayToMonday=0 shiftDayChange=1 hoursFromGMT=2 ppf=-----Pip factors----- pipFactor100=JPY,XAG,SILVER,BRENT,WTI pipFactor10=XAU,GOLD,SP500 pipFactor1=UK100,WS30,DAX30,NAS100,CAC400 tsBM=-----10.3----- dis=-----Display----- useTextOnly=0 colorNeutral=16777215 colorPosOrLong=9419919 colorNegOrShort=6053069 gridLineCount=3 gridLineColor=5197615 dva=Display variables showDP=1 showDO=1 showWP=1 showMP=0 showDirection=0 showOrder10.2a=1 showOrder10.3=1 showPipFactor=0 showAdx=1 AdxBullThreshold=50 fon=-----Font inputs----- nonPropFont=Lucida Console fontSize=10 col=-----Colors----- headerColor=65535 bodyColor=55295 At this stage i have turned the jump trade management off on BBBE and are considering adding MPTM to manage my BBE trades.... Any Help Would be appreciated... Regards Wiggy - aka Paul |
|
| Author: | McNish [ Fri Jan 18, 2013 8:08 am ] |
| Post subject: | Re: Bob's Biggest Balls Ever |
@ Wiggy : I guess the error means that the SL settings ( either, BE, SL, TSL or JSL ) are closer than allowed by your broker. I too had the same error so the suggestion is just my 2 cents. |
|
| Author: | Wiggy1965 [ Fri Jan 18, 2013 9:32 am ] |
| Post subject: | Re: Bob's Biggest Balls Ever |
Thanks McNish, does the EA identify a pip as one digit or two..? So for exsample, 2 pips would be represented as 2 or 20.....It's just my broker (and many others) represent to pips as 20.... I'm experimenting with both, but a clear answer would be of help... Wiggy |
|
| All times are UTC | Page 15 of 26 |
|
Powered by phpBB® Forum Software © phpBB Limited |
|