Jedster wrote:A statistically rare day today. EURUSD hit R3, then down to S3 and is now passing above R2 back on its way to R3 again. I bet some serious stops were tripped within the last few hours!

kwanann wrote:Attached is the rar file that contains the predefined profiles

Included the NB 10.3 indi and Baluda's latest DWMP as well inside the Indicators folder

Make sure you shut down Empty4 before running the following

Extract the files in indicators folder to \experts\indicators
Extract the files in profile folders to \profiles

There are 3 profiles, New York, London and Japan, you can easily switch it via File -> Profiles

All contains a label with the profile name so that you won't get mixed up

rostaus wrote:

kwanann wrote:Attached is the rar file that contains the predefined profiles

Included the NB 10.3 indi and Baluda's latest DWMP as well inside the Indicators folder

Make sure you shut down Empty4 before running the following

Extract the files in indicators folder to \experts\indicators
Extract the files in profile folders to \profiles

There are 3 profiles, New York, London and Japan, you can easily switch it via File -> Profiles

All contains a label with the profile name so that you won't get mixed up

Thanks Kwanann, the profiles would be very useful, when I load the profiles it says 'waiting for update', restarted Empty4 a few times, what crim are you with?

kwanann wrote:

rostaus wrote:

kwanann wrote:Attached is the rar file that contains the predefined profiles

Included the NB 10.3 indi and Baluda's latest DWMP as well inside the Indicators folder

Make sure you shut down Empty4 before running the following

Extract the files in indicators folder to \experts\indicators
Extract the files in profile folders to \profiles

There are 3 profiles, New York, London and Japan, you can easily switch it via File -> Profiles

All contains a label with the profile name so that you won't get mixed up

Thanks Kwanann, the profiles would be very useful, when I load the profiles it says 'waiting for update', restarted Empty4 a few times, what crim are you with?

Using fxprimus ECn,, you might need to open the profile chart files in notepad and change the symbol, for mine it's - for some it's . Or m etc

Baluda wrote:The latest version of DWMPivots supports the setting the pivots at any hour you want through the 'hoursFromGMT' setting. This setting puts midnight/day change for the calculation of the pivots at the hour of your own choice.

The only requirement is a PC with XP or better and automatic time settings.

• It does not matter in what time zone you are.
• It does not matter in what time zone your broker is.
• It does not matter in what time zone your PC is.
• DWMPivots knows what to do!

If you set hoursFromGMT to 0 your pivots will be at, drumroll please, GMT+0, midnight in London. If you set hoursFromGMT to 1 your pivots will be at GMT+1, midnight in Amsterdam, Paris, Madrid, Rome, Kinshasa. At 2 they will be at GMT+2, midnight in Kiev, Joburg. Etc, etc.

Here are some possible settings:

• +2 = Sydney Open, -7 = Sydney Close, +1 = one hour before Sydney Open.
• 0 = Tokyo Open, -9 = Tokyo Close, -1 = one hour before Tokyo Open.
• -7 = Frankfurt Open, +4 = Frankfurt Close, -6 = one hour before Frankfurt Open.
• -8 = London Open, +7 = London Close, -7 = one hour before London Open.
• +11 = New York Open, +2 = New York Close, +10 = one hour before New York Open.

Cheers,

Paul

kwanann wrote:AUDCAD, nice trade of 27 pips

EURAUD, 80pips on the table

EURCAD, another 30 pips

GBPAUD, 64pips

USDCAD, loss of 28pip

Total potential pips: 173

of course in real life.. i wimped out way before that

Gertje wrote:

kwanann wrote:AUDCAD, nice trade of 27 pips

EURAUD, 80pips on the table

EURCAD, another 30 pips

GBPAUD, 64pips

USDCAD, loss of 28pip

Total potential pips: 173

of course in real life.. i wimped out way before that

They all made it to R/S 1 at least, so maybe a good referencepoint to TP?

kwanann wrote:

Baluda wrote:The latest version of DWMPivots supports the setting the pivots at any hour you want through the 'hoursFromGMT' setting. This setting puts midnight/day change for the calculation of the pivots at the hour of your own choice.

The only requirement is a PC with XP or better and automatic time settings.

• It does not matter in what time zone you are.
• It does not matter in what time zone your broker is.
• It does not matter in what time zone your PC is.
• DWMPivots knows what to do!

If you set hoursFromGMT to 0 your pivots will be at, drumroll please, GMT+0, midnight in London. If you set hoursFromGMT to 1 your pivots will be at GMT+1, midnight in Amsterdam, Paris, Madrid, Rome, Kinshasa. At 2 they will be at GMT+2, midnight in Kiev, Joburg. Etc, etc.

Here are some possible settings:

• +2 = Sydney Open, -7 = Sydney Close, +1 = one hour before Sydney Open.
• 0 = Tokyo Open, -9 = Tokyo Close, -1 = one hour before Tokyo Open.
• -7 = Frankfurt Open, +4 = Frankfurt Close, -6 = one hour before Frankfurt Open.
• -8 = London Open, +7 = London Close, -7 = one hour before London Open.
• +11 = New York Open, +2 = New York Close, +10 = one hour before New York Open.

Cheers,

Paul

Paul, not sure if you can accede to this request, but can you put a countdown timer as well? The GMT shift is nice, but silly me is totally confused on how many hours more to a new trading day for that GMT shift

wycfitz wrote:

kwanann wrote:

Baluda wrote:The latest version of DWMPivots supports the setting the pivots at any hour you want through the 'hoursFromGMT' setting. This setting puts midnight/day change for the calculation of the pivots at the hour of your own choice.

The only requirement is a PC with XP or better and automatic time settings.

• It does not matter in what time zone you are.
• It does not matter in what time zone your broker is.
• It does not matter in what time zone your PC is.
• DWMPivots knows what to do!

If you set hoursFromGMT to 0 your pivots will be at, drumroll please, GMT+0, midnight in London. If you set hoursFromGMT to 1 your pivots will be at GMT+1, midnight in Amsterdam, Paris, Madrid, Rome, Kinshasa. At 2 they will be at GMT+2, midnight in Kiev, Joburg. Etc, etc.

Here are some possible settings:

• +2 = Sydney Open, -7 = Sydney Close, +1 = one hour before Sydney Open.
• 0 = Tokyo Open, -9 = Tokyo Close, -1 = one hour before Tokyo Open.
• -7 = Frankfurt Open, +4 = Frankfurt Close, -6 = one hour before Frankfurt Open.
• -8 = London Open, +7 = London Close, -7 = one hour before London Open.
• +11 = New York Open, +2 = New York Close, +10 = one hour before New York Open.

Cheers,

Paul

Paul, not sure if you can accede to this request, but can you put a countdown timer as well? The GMT shift is nice, but silly me is totally confused on how many hours more to a new trading day for that GMT shift

Kwanann,
You might want to attach this trade session clock on a blank chart it has GMT time, your broker time, and what trading session you are in at the present time.
Hope it helps,

P4 Clock.zip