stevehopwoodforex.com
https://www.stevehopwoodforex.com/phpBB3/
Print view

TDesk User Indicators Playground
https://www.stevehopwoodforex.com/phpBB3/viewtopic.php?t=5538		 Page 18 of 34
Author:  thomasmore [ Sat Mar 09, 2019 4:33 pm ]
Post subject:  TDesk User Indicators Playground
Hello all,
A indicator I use is the Schaff Trend. Much faster than the lagging MACD.
If possible, can someone make it TDesk-compatible ? If user inputs " min level =10", "max level=90", "crossover=50" could be added, that would make it perfect.
Best regards and have a good weekend,
thomasmore
Author:  Ehrenmat [ Sat Mar 09, 2019 8:25 pm ]
Post subject:  TDesk User Indicators Playground
thomasmore » Today, 18:33 wrote:Hello all,
A indicator I use is the Schaff Trend. Much faster than the lagging MACD.
If possible, can someone make it TDesk-compatible ? If user inputs " min level =10", "max level=90", "crossover=50" could be added, that would make it perfect.
Best regards and have a good weekend,
thomasmore

Hey thomasmore,

I tried your settings with the TDI MTF, I have rewritten for TDesk signaling. It seems to do the exact same trick for you. You can also hide all other lines to let it look exactly the same. In case it is not smooth enough, you can use the new feature called Exponential Smoothing.

If this doesn't suit your demand, let me know...

Cheers,

Mat

:hi:
Author:  eclipse [ Mon Mar 11, 2019 12:11 am ]
Post subject:  TDesk User Indicators Playground
Hi, Thomas

I hope this is the right place to post
their seems to be a bug within the Allaverages TD V2
Author:  SteveHopwood [ Mon Mar 11, 2019 12:21 am ]
Post subject:  TDesk User Indicators Playground
eclipse » Mon Mar 11, 2019 12:11 am wrote:Hi, Thomas

I hope this is the right place to post
their seems to be a bug within the Allaverages TD V2
TDesk is a ridiculously complicated piece of kit that responds to signals sent it from umpteen indicators set up to respond to them.

TDesk is astonishingly accurate. It is coded by Thomas to a level of expertise that you cannot even begin to understand.

We are talking unbelievable levels of accuracy here.

You think TDes is not responding accurately to an indi?

Dream on. You are a sadly deluded person. The indi is sending crap.

Get the coder of the indi you are complaining about to report results more accurately.

Unless you want to attract my wrath. You will not enjoy that.

Actually, you have already attracted my wrath.

All of the above assumes you actually know how to use TDesk. Given the lamentable quality of your post, I doubt that you do.

Post stupidly again and I will remove your posting rights. Assuming I am in a good mood. In a bad mood? I will ban you altogether.

Capiche, dimwit?

:xm: :rocket:
Author:  eclipse [ Mon Mar 11, 2019 12:33 am ]
Post subject:  TDesk User Indicators Playground
Hi, Steve

thanks for the comment I believe this indicator was from Thomas "official" indicators collection

maybe its the setting IgnoreOpenCandles tried switching back & forth im not sure what it could be as I have no coding experience
Author:  tomele [ Mon Mar 11, 2019 9:53 am ]
Post subject:  TDesk User Indicators Playground
maybe its the setting IgnoreOpenCandles tried switching back & forth im not sure what it could be as I have no coding experience
Nope. Nobody ever said AllAverages would signal where the price is in relation to the average. AllAverages does the most basic thing that can be done with an average which is signaling it's slope. If you want to signal the price-average relation to TDesk, you have to use the AllAverages Cross indicator with FastPeriod set to 1 and FastPrice set to 0.

Would you have any coding experience, you would know that coders tend to test their works before releasing them. At least such simple ones as indicators. So next time you think to have found an evident fault in something that is used by many others without complaint, think twice. The error might be on the user side, not on the coding side.

And then avoid words like "bug" when you are asking for something you don't understand. Coders (and very much the forum owner) react allergical to users doing so. As you have already seen.

Thomas
Author:  eclipse [ Mon Mar 11, 2019 8:22 pm ]
Post subject:  TDesk User Indicators Playground
Thank you Thomas and you also Steve I will refrain from such language my mistake :arrrg:
I will do as you've suggested on the AllAverages Cross im trying out different setups will post back on anything positive
Author:  taipan [ Tue Mar 12, 2019 3:35 am ]
Post subject:  TDesk User Indicators Playground
thomasmore » Sun Mar 10, 2019 12:33 am wrote:Hello all,
A indicator I use is the Schaff Trend. Much faster than the lagging MACD.
If possible, can someone make it TDesk-compatible ? If user inputs " min level =10", "max level=90", "crossover=50" could be added, that would make it perfect.
Best regards and have a good weekend,
thomasmore

I have a better one with slope alert, any body can help to change it to TD compatible. Credit should go to MrTools of Forex-station.


Thanks in advance.
Author:  ishak123 [ Sat Mar 16, 2019 5:21 pm ]
Post subject:  TDesk User Indicators Playground
Hi
"Schaff Trend Cycle nrp (alerts)" modified to TD version, not tested live, hope will work.
see if it is helpful for you.
Ishak
Author:  taipan [ Sat Mar 16, 2019 10:18 pm ]
Post subject:  TDesk User Indicators Playground
ishak123 » Sun Mar 17, 2019 1:21 am wrote:Hi
"Schaff Trend Cycle nrp (alerts)" modified to TD version, not tested live, hope will work.
see if it is helpful for you.
Ishak
Ihsak,

Thanks for the mod, will try it out.

I have just loaded into indicators folder of empty4 but found 2 errors and 1 warning, see image attached:

So, it could not be compiled.
All times are UTC Page 18 of 34

Powered by phpBB® Forum Software © phpBB Limited