stevehopwoodforex.com
https://www.stevehopwoodforex.com/phpBB3/
Print view

10.6 EDSEL
https://www.stevehopwoodforex.com/phpBB3/viewtopic.php?t=3259		 Page 192 of 234
Author:  Gertje [ Wed Mar 26, 2014 6:05 pm ]
Post subject:  10.6 EDSEL
alorente » Wed Mar 26, 2014 3:36 pm wrote:
Gertje » Wed Mar 26, 2014 3:11 pm wrote:
art » Wed Mar 26, 2014 2:02 pm wrote:hi guys need to do a bit of catching up, markets flat as a pancake, al my cpu usage is quite high using your indies, its running at 50% + any toughts running version 625, cheers
I have the same since I added the MTF TMA, moved back since and load template if I want to have a look.

Any tinkerers out-there who are willing to strip down the TMA?
I'm not sure if I have the one from Al, which updates only at the close of candle.
I don´t understand your problem. I have on one monitor the main screen pictured below with 4 TMA´s and 20 charts in the other monitor with 10.6 running off one computer and I only have a max of 4% CPU usage.

Make sure you have the 4 TMA´s loaded into one chart only and set up the pairs to the left like the picture. When you want to change charts just mouse drag a pair from the left and drop it into the chart window and it changes immediately. Just as fast as having many charts loaded with almost no CPU load.
Now there's a neat trick!
:!!:
I only run 1 screen (trade @ work) but that will do the job!

Even EA's can be run from blank charts.
.
Author:  art [ Wed Mar 26, 2014 6:07 pm ]
Post subject:  10.6 EDSEL
no error messages tomasso
Author:  xrismak [ Wed Mar 26, 2014 6:34 pm ]
Post subject:  10.6 EDSEL
Alorenteeeeeeeeeeeeeeeeee,

Thank You So very Much for your Imput and Guidance on this Thread, Nanningbob, You are A Star the Real Deal. I Believe A Picture Says so Many Words, so I am Going to Give the Last 50 Pages of this Thread a Thorough Read All over Again and Assimilate Fully. I Think One just has to Exercise A Lot of Patience and Look Very Hard and Things will Fall Practically In Place, thank You Everyone for Making all those Wonderful Interesting Contributions, I Appreciate You All .
ALORENTEEEEEEEEEE This INDICATOR ACTUALLY DOES WORK 26-03-14.png
Happy Trading Y'all,

xrismak :yahoo:


alorente » Wed Mar 26, 2014 5:59 pm wrote:
rosst » Wed Mar 26, 2014 4:33 pm wrote: I appreciate all your posts - very informative stuff! Would you post the 3 templates you are using?
Thanks again for all you are doing here.
Here you go. Let me know if you are missing any indis...
Author:  spotdespot [ Wed Mar 26, 2014 6:34 pm ]
Post subject:  10.6 EDSEL
art » Wed Mar 26, 2014 7:07 pm wrote:no error messages tomasso
I have noticed that occasionally build 600+ removes indis for no reason - seems to be pre-build 600 compiled ones. I noticed this once with the Extreme TMA info indi and it just showed 9.0 for all the values - so I suspect for one reason or another you don't have the indi on your chart. Hit Ctl+i or right click and go to indicators - I bet it's not there. Just add it again if that's the case.
Author:  milanese [ Wed Mar 26, 2014 6:43 pm ]
Post subject:  10.6 EDSEL
art » Wed Mar 26, 2014 6:07 pm wrote:no error messages tomasso
art,try the attached one I modified a lit and it runs here with no problem on a 625 build ..
Extreme TMA info 0.41.mq4
Cheers :)

Tommaso
Author:  alorente [ Wed Mar 26, 2014 6:46 pm ]
Post subject:  10.6 EDSEL
GbpUsd is just finishing its H1 cycle and should be turning it down again. A good short at this point to continue bringing H4 down to D1. I am short at this point. No guarantees ... :hi:
Author:  Pedigree [ Wed Mar 26, 2014 6:56 pm ]
Post subject:  10.6 EDSEL
spotdespot » Wed Mar 26, 2014 7:34 pm wrote:
art » Wed Mar 26, 2014 7:07 pm wrote:no error messages tomasso
I have noticed that occasionally build 600+ removes indis for no reason - seems to be pre-build 600 compiled ones. I noticed this once with the Extreme TMA info indi and it just showed 9.0 for all the values - so I suspect for one reason or another you don't have the indi on your chart. Hit Ctl+i or right click and go to indicators - I bet it's not there. Just add it again if that's the case.
I think what happened was that although the template bore the indi, Al omitted to include the indi itself in this his post

http://www.stevehopwoodforex.com/phpBB3 ... 206#p88206

He uploaded the indi in a later post. So you're right Spot, it has to be added to the template afresh and then re-saved.
Author:  Pedigree [ Wed Mar 26, 2014 7:03 pm ]
Post subject:  10.6 EDSEL
alorente » Wed Mar 26, 2014 7:46 pm wrote:GbpUsd is just finishing its H1 cycle and should be turning it down again. A good short at this point to continue bringing H4 down to D1. I am short at this point. No guarantees ... :hi:
Yes, been watching that one. I was surprised it went that high. I had made an entry earlier but baled out with 5 pips when it stated to move upwards!!!
Author:  xrismak [ Wed Mar 26, 2014 7:05 pm ]
Post subject:  10.6 EDSEL
Seanyd,

Sean D Gigantilus, you are Welcome to this Party, your Input my Friend is Very welcome .... :youknow:
Author:  spotdespot [ Wed Mar 26, 2014 7:11 pm ]
Post subject:  10.6 EDSEL
I think what happened was that although the template bore the indi, Al omitted to include the indi itself in this his post

http://www.stevehopwoodforex.com/phpBB3 ... 206#p88206

He uploaded the indi in a later post. So you're right Spot, it has to be added to the template afresh and then re-saved.
Could be that's what Art did - I didn't use the template and have had indi's "disappear" occasionally with the latest builds - Extreme TMA it happened once and I have a Magnified Market Price indi that it happens fairly frequently with. I suspect Tommaso's version will ensure it doesn't happen with the Extreme Info indi. Thanks Tommaso - yet again!! :cheer:
All times are UTC Page 192 of 234

Powered by phpBB® Forum Software © phpBB Limited