stevehopwoodforex.com
https://www.stevehopwoodforex.com/phpBB3/
Print view

10.6 EDSEL
https://www.stevehopwoodforex.com/phpBB3/viewtopic.php?t=3259		 Page 220 of 234
Author:  Ashflash [ Thu Apr 03, 2014 12:10 am ]
Post subject:  10.6 EDSEL
Hi All,

I too was having a few concerns with the scripts not workig last week and managed to overcome it by going through the Tools / Options / Expert Advisors menu and ensuring that the check boxes were appropraite for what I was trying to do (see screen shot below)

I noticed that with the new build my preferences here had been changed & by ticking "Allow Automated Trading" they worked again.

Once I did this also re-clicked to confirm "1 Click trading" within the "Trade" tab and it's worked ever since.

Give this a go & see if it helps.

Ash

Screen Shot 2014-04-03 at 11.01.02 AM.png
nanningbob » Thu Apr 03, 2014 9:54 am wrote:
milanese » Thu Apr 03, 2014 6:45 am wrote:
nanningbob » Wed Apr 02, 2014 10:25 pm wrote:
First I appreciate all your posts and illustrations. I just havent had that much free time to post my trades as I take them. What I am seeing so far with the MA/ATR is places I can put limit orders which is something I almost never use. Now with these lines I can see places where if price spikes I get a chance to get in back into a trend or move and maybe get close to the max pips. Anyway keep up the good work.

On another note, has anyone updated the scripts yet? the buy/sell/close etc. Mine arent working anymore.
Also my trades analyzer script is not working either. Does anyone have a working alternative? I have written Cowboy Cowboy Cowboy Cowboy IBFX and they seem to be working on it but right now I dont have one.
If you have the mq4 files of this scripts you can pm them to me and I will take a look to update them to 625 build..

Cheers :)

Tommaso
Here are my most commonly used scripts. The others I have are from I B F X and are executable files only. I have to wait until they do them. Thanks
Author:  milanese [ Thu Apr 03, 2014 12:38 am ]
Post subject:  10.6 EDSEL
nanningbob » Wed Apr 02, 2014 11:54 pm wrote:
Here are my most commonly used scripts. The others I have are from I B F X and are executable files only. I have to wait until they do them. Thanks
Here are the 625 compatible scripts attached and yes you must activate autotrading, if it is not activated the scripts wont run..Ashflash is right :good:
MODIFY SCRIPTS6xx.zip
Cheers :)

Tommaso
Author:  nzlfxasia [ Thu Apr 03, 2014 4:06 am ]
Post subject:  10.6 EDSEL
Hi Tommaso,
Could you help me with this attached save screen shot script of mine?
Also attached is the utility.dll which is found in one of the line of the .mq4 file.
Utility.dll
"C:\zlng\photo\personal\Empty4- AxisTrader_NZL" is the folder that contains the Empty4 program which I copied from other PC that has been installed with older version of Empty4 before the 625 update. I have been running Empty4 from this folder by just double clicking the terminal.exe file all this while without the need to install it to my new PC.

Thanks a lot!

milanese » Thu Apr 03, 2014 8:38 am wrote:
nanningbob » Wed Apr 02, 2014 11:54 pm wrote:
Here are my most commonly used scripts. The others I have are from I B F X and are executable files only. I have to wait until they do them. Thanks
Here are the 625 compatible scripts attached and yes you must activate autotrading, if it is not activated the scripts wont run..Ashflash is right :good:

Cheers :)

Tommaso
Author:  xrismak [ Thu Apr 03, 2014 5:26 am ]
Post subject:  10.6 EDSEL
milanese » Thu Apr 03, 2014 12:38 am wrote:
nanningbob » Wed Apr 02, 2014 11:54 pm wrote:
Here are my most commonly used scripts. The others I have are from I B F X and are executable files only. I have to wait until they do them. Thanks
Here are the 625 compatible scripts attached and yes you must activate autotrading, if it is not activated the scripts wont run..Ashflash is right :good:

Cheers :)

Tommaso

Hi Tommaso,

How about this one, can you kindly Modify it... (Change Template Script)



Many Thanks,
xrismak :D
Author:  spotdespot [ Thu Apr 03, 2014 7:10 am ]
Post subject:  10.6 EDSEL
xrismak » Thu Apr 03, 2014 6:26 am wrote:
Hi Tommaso,

How about this one, can you kindly Modify it... (Change Template Script)

Many Thanks,
xrismak :D
This one works xrismak. You uploaded the compiled version - which can't be changed anyway (without decompiling)
Author:  milanese [ Thu Apr 03, 2014 9:30 am ]
Post subject:  10.6 EDSEL
nzlfxasia » Thu Apr 03, 2014 4:06 am wrote:Hi Tommaso,
Could you help me with this attached save screen shot script of mine?
Also attached is the utility.dll which is found in one of the line of the .mq4 file.

"C:\zlng\photo\personal\Empty4- AxisTrader_NZL" is the folder that contains the Empty4 program which I copied from other PC that has been installed with older version of Empty4 before the 625 update. I have been running Empty4 from this folder by just double clicking the terminal.exe file all this while without the need to install it to my new PC.

Thanks a lot!
The new build uses Unicode strings, not Ansi strings. So the dll must maybe adapted...
Look here for more informations...http://forum.mql4.com/60608#903603

Cheers :)

Tommaso
Author:  Gertje [ Thu Apr 03, 2014 10:31 am ]
Post subject:  10.6 EDSEL
Few weeks ago, there was dscussion about trading the Daily chart using the TMA-lines.

I opened a little account the 24th [March] and started trading.
Entered the initial trades mid-range after eyeballing which way the trade would go.
Downdraft was minimal, and profit is +10% at the moment.
100% winners, no losers [yet].

Trading 0.01 lots for $2.000,- balance.

MT4i link is attached in signature-field below [thanks to Milanese!] to check it out.
Author:  nanningbob [ Thu Apr 03, 2014 11:35 am ]
Post subject:  10.6 EDSEL
Gertje » Thu Apr 03, 2014 6:31 pm wrote:Few weeks ago, there was dscussion about trading the Daily chart using the TMA-lines.

I opened a little account the 24th [March] and started trading.
Entered the initial trades mid-range after eyeballing which way the trade would go.
Downdraft was minimal, and profit is +10% at the moment.
100% winners, no losers [yet].

Trading 0.01 lots for $2.000,- balance.

MT4i link is attached in signature-field below [thanks to Milanese!] to check it out.
YUP been doing it on a separate account and have increased that account exactly 10% in 3 weeks. Just put a pending and let it run. Check it once or twice a day.
Author:  nanningbob [ Thu Apr 03, 2014 11:49 am ]
Post subject:  10.6 EDSEL
spotdespot » Thu Apr 03, 2014 3:10 pm wrote:
xrismak » Thu Apr 03, 2014 6:26 am wrote:
Hi Tommaso,

How about this one, can you kindly Modify it... (Change Template Script)

Many Thanks,
xrismak :D
This one works xrismak. You uploaded the compiled version - which can't be changed anyway (without decompiling)
I tried it out thinking it would give me a choice of what template to load and it loaded my 10.6 info page on all my charts and froze up my Empty4.
Author:  ace81 [ Thu Apr 03, 2014 12:02 pm ]
Post subject:  10.6 EDSEL
nanningbob » Thu Apr 03, 2014 7:49 pm wrote:
spotdespot » Thu Apr 03, 2014 3:10 pm wrote:
xrismak » Thu Apr 03, 2014 6:26 am wrote:
Hi Tommaso,

How about this one, can you kindly Modify it... (Change Template Script)

Many Thanks,
xrismak :D
This one works xrismak. You uploaded the compiled version - which can't be changed anyway (without decompiling)
I tried it out thinking it would give me a choice of what template to load and it loaded my 10.6 info page on all my charts and froze up my Empty4.
You can choose which template you want to load with that, your first one must be infopage
0 are the first one
1 is for second
2 is third...
All times are UTC Page 220 of 234

Powered by phpBB® Forum Software © phpBB Limited