10.7/10.9 INDI SOLUTIONS

Post by **milanese** » Thu Apr 17, 2014 8:33 am

rdg281 » Thu Apr 17, 2014 6:30 am wrote:
cumquat » Wed Apr 16, 2014 9:17 pm wrote:Its in the zip file on post 1 of the 10.6 Topic here http://www.stevehopwoodforex.com/phpBB3 ... =38&t=3259

Mick.
Thanks mate but i was looking for the V 3. with swap
cheers

Here you go ..

10.6 market info V_3.1.mq4

Cheers

Tommaso

Post by **rdg281** » Thu Apr 17, 2014 9:03 am

Thx Tomasso :hi:

Post by **nanningbob** » Thu Apr 17, 2014 4:06 pm

rdg281 » Thu Apr 17, 2014 2:30 pm wrote:
cumquat » Wed Apr 16, 2014 9:17 pm wrote:Its in the zip file on post 1 of the 10.6 Topic here http://www.stevehopwoodforex.com/phpBB3 ... =38&t=3259

Mick.
Thanks mate but i was looking for the V 3. with swap
cheers

Last time. Go to page 1 post 1 one 7.0 and download the update. Unzip it. Open indicators folder and it is there along with the rest of the indicators including the Read First document document. I would not have told you to go there if it was not there.

First two sentences of the read first document.

Inside are the new test templates for this week and were updated on or before 4.13.14. They include the updates I have for the 10.7 series. I have combined 10.7 and 10.9 into one template. The 10.9 is on the daily and the 10.7 is on the 4H and below so one template for both.

effluvium · Post by **effluvium** » Thu Apr 17, 2014 4:19 pm

Hi Tommaso,
When analyzing some historical alerts of 10.7 Stoch, it seems that it is alerting for something which does not happen. The case was observed with GBPCAD, at 10H and a bit later at 11H am (GlobalPrime Time Server, meaning 8 and 9 am GMT Timezone).
Just look at the chart I am joining here: I don't know if it's concerning Stoch4H, or Stoch1H ?

Another strange alert was with EURGBP for SELL at 10H am (8H am GMT).

GBPCAD_Signal_17April2014.jpg

Post by **milanese** » Thu Apr 17, 2014 5:03 pm

effluvium » Thu Apr 17, 2014 4:19 pm wrote:Hi Tommaso,
When analyzing some historical alerts of 10.7 Stoch, it seems that it is alerting for something which does not happen. The case was observed with GBPCAD, at 10H and a bit later at 11H am (GlobalPrime Time Server, meaning 8 and 9 am GMT Timezone).
Just look at the chart I am joining here: I don't know if it's concerning Stoch4H, or Stoch1H ?

Another strange alert was with EURGBP for SELL at 10H am (8H am GMT).

The alerts are using your local time not the broker time and 10 am globalprime time is 7 am GMT as GlobalPrime uses actual GMT+3 (DST).. I use it myself and I never got a strange alert.

Cheers

Tommaso

effluvium · Post by **effluvium** » Thu Apr 17, 2014 5:41 pm

milanese » Thu Apr 17, 2014 6:03 pm wrote:
effluvium » Thu Apr 17, 2014 4:19 pm wrote:Hi Tommaso,
When analyzing some historical alerts of 10.7 Stoch, it seems that it is alerting for something which does not happen. The case was observed with GBPCAD, at 10H and a bit later at 11H am (GlobalPrime Time Server, meaning 8 and 9 am GMT Timezone).
Just look at the chart I am attaching here: I don't know if it's concerning Stoch4H, or Stoch1H ?

Another strange alert was with EURGBP for SELL at 10H am (8H am GMT).
The alerts are using your local time not the broker time and 10 am globalprime time is 7 am GMT as GlobalPrime uses actual GMT+3 (DST).. I use it myself and I never got a strange alert.
Cheers
Tommaso

Tommaso, The question remains unsolved, whether considering DST or not. I mean if you look to the Stoch blue curve, it was already at the top when alerts was considering a 30 level breakout.
OK I admit that I forgot the fact that I have to add 1H for DST or SummerTime.
So now my time zone is GMT+2, (1H after London which is GMT+1 considering DST), and GlobalPrimeServer is GMT+3

Post by **putusernamehere** » Thu Apr 17, 2014 6:07 pm

Hi; :hi: effluvium
I use the 10.7 indicator on H4 since over a week and I got never a false or strange alert the same for 10.9 on D1 you must do something wrong at your backend..

Cheers Gunter :hi:

Post by **rdg281** » Fri Apr 18, 2014 8:52 am

good morning all,

Is it an idea or possible, when the 2.1,1 switch-point took place to put that value visual somewhere in in the chart.
So you now where the turning-point is around that value. Could be handy when it is flipping.
In that way, when it is in a little range you remember when it switched on what value the last time.
For example, yesterday (not remember precisely) the 10.9 2.1.1 gbp-usd flipped around the 1.6725 to 0 but went up again to 100 and now i don't remember and you can't immediately see what was the last critical turning point.
Or is it a stupid idea.

cheers :hi:

AnGri · Post by **AnGri** » Fri Apr 18, 2014 5:32 pm

Hi,

i look for a script that changes the currency pair on all charts - either in the charts displayed, or in in all charts of a portfolio.

If it is possible to change the time frame on the charts, i guess it should be possible to change the pair too.
But unfortunately i couldn't figure out how.

Can anybody help?

Oh, and it would be ultracool if the currency pair could be chosen from a dropdown (is this possible at all in MQL?), or via drag and drop from the market window.

Post by **Gertje** » Fri Apr 18, 2014 5:44 pm

rdg281 » Fri Apr 18, 2014 8:52 am wrote:good morning all,

Is it an idea or possible, when the 2.1,1 switch-point took place to put that value visual somewhere in in the chart.
So you now where the turning-point is around that value. Could be handy when it is flipping.
In that way, when it is in a little range you remember when it switched on what value the last time.
For example, yesterday (not remember precisely) the 10.9 2.1.1 gbp-usd flipped around the 1.6725 to 0 but went up again to 100 and now i don't remember and you can't immediately see what was the last critical turning point.
Or is it a stupid idea.

cheers :hi:

The previous bar closing value is your turningpoint. You can draw a line or use the daily/ weekly open indicators supplied somewhere in the thread.