stevehopwoodforex.com
https://www.stevehopwoodforex.com/phpBB3/
Print view

Hopelessly confused by TDesk or Desky? Ask here.
https://www.stevehopwoodforex.com/phpBB3/viewtopic.php?t=5546		 Page 27 of 71
Author:  melgachata [ Thu Sep 12, 2019 8:29 am ]
Post subject:  Hopelessly confused by TDesk or Desky? Ask here.
Wavegarrick » Wed Sep 11, 2019 6:48 pm wrote: Hi Rui,

Your Empty4 is probably freezing because you do not have Tomele's "TDesk universal buffer drone" aka UBD downloaded on your platform. There are files that need to go in your library folders as well. I cannot go through the lengthy process as it involves reading and following Thomas's instructions. You need to go through it from the beginning and you will find it under http://www.stevehopwoodforex.com/phpBB3 ... 106&t=5655 and http://www.stevehopwoodforex.com/phpBB3 ... 106&t=5545 and for HGI you need to have the indicator and library files from here http://www.stevehopwoodforex.com/phpBB3 ... =88&t=3964. I have posted my indicators and perhaps should post the MTF HGI TD Bars V2 indicator here again:
Here goes:

I cannot emphasize enough how you need to keep up with the latest developments here at SHF by reading and keeping up with the program. I understand how difficult it must be for new members and perhaps you can keep up with the developments in my thread to get you up to speed.http://www.stevehopwoodforex.com/phpBB3 ... =88&t=5514.
Steve has also set up a thread to get all started with TDesk. http://www.stevehopwoodforex.com/phpBB3 ... 106&t=5536

Anyway I will copy this reply to my thread as well, as it is relevant to my developments,

Cheers
Leon
Many thanks for the instructions Wavegarrick
In a simple and polite way, you gave me a lot of instructions (I was missing the UBD), which were passed by me.
I will study carefully and hard.
Best regards,
Rui
Author:  m0nk111 [ Thu Sep 12, 2019 9:05 pm ]
Post subject:  Hopelessly confused by TDesk or Desky? Ask here.
hi,
is it possible with Tdesk to tell if a indicator gives a flat signal, to use other/alternative indicators to determain the direction

so if pk-1H gives flat signal, use these indicators to determain a signal,
so u can add an indi or 2 just for that situation?

or is it like a veto indi flat signal, gives a score?
how?

my goal is to figure a strategy where i can put other indi's to work when an indi (PK-H1) is flat

thx
Author:  Sojourner [ Thu Sep 12, 2019 10:50 pm ]
Post subject:  Hopelessly confused by TDesk or Desky? Ask here.
Capture.JPG
I'm stuck. I Just downloaded fresh WaveGarricks latest set-up thing from http://www.stevehopwoodforex.com/phpBB3 ... 20#p168639 page 42
I went to all the appropriate pages and downloaded the fresh and latest versions of everything.
I can load TDesk version 6.81 OK but when I went to load a blank chart with TDesk Trading Partner EA V3r.mq4 as suggested, (I tried without loading the set file as well) I get these alerts. Pulling one of my two hairs out here.
Note, I DID notice that the the non-v3r partner EA works with with that TDeskSignal but not the v3R.
I'm at a loss to find the right one on the forums.
Author:  taipan [ Fri Sep 13, 2019 12:13 am ]
Post subject:  Hopelessly confused by TDesk or Desky? Ask here.
Sojourner » Fri Sep 13, 2019 6:50 am wrote:I'm stuck. I Just downloaded fresh WaveGarricks latest set-up thing from http://www.stevehopwoodforex.com/phpBB3 ... 20#p168639 page 42
I went to all the appropriate pages and downloaded the fresh and latest versions of everything.
I can load TDesk version 6.81 OK but when I went to load a blank chart with TDesk Trading Partner EA V3r.mq4 as suggested, (I tried without loading the set file as well) I get these alerts. Pulling one of my two hairs out here.
Note, I DID notice that the the non-v3r partner EA works with with that TDeskSignal but not the v3R.
I'm at a loss to find the right one on the forums.

Try to download again all the new setup in a new folders. Re-download all the supported files for TDesk Universal Buffers again and include files should be placed correctly. After reloading all the indicators, presets, experts etc. restart your platform. I think you have placed the include files incorrectly. Try to download my include and indicators folder into your respective folders in your Empty4 platform. I hope this help.
include.zip
indicators.zip
taipan
Author:  Sojourner [ Fri Sep 13, 2019 1:47 am ]
Post subject:  Hopelessly confused by TDesk or Desky? Ask here.
taipan » Thu Sep 12, 2019 7:13 pm wrote:
Sojourner » Fri Sep 13, 2019 6:50 am wrote:I'm stuck. I Just downloaded fresh WaveGarricks latest set-up thing from http://www.stevehopwoodforex.com/phpBB3 ... 20#p168639 page 42
I went to all the appropriate pages and downloaded the fresh and latest versions of everything.
I can load TDesk version 6.81 OK but when I went to load a blank chart with TDesk Trading Partner EA V3r.mq4 as suggested, (I tried without loading the set file as well) I get these alerts. Pulling one of my two hairs out here.
Note, I DID notice that the the non-v3r partner EA works with with that TDeskSignal but not the v3R.
I'm at a loss to find the right one on the forums.

Try to download again all the new setup in a new folders. Re-download all the supported files for TDesk Universal Buffers again and include files should be placed correctly. After reloading all the indicators, presets, experts etc. restart your platform. I think you have placed the include files incorrectly. Try to download my include and indicators folder into your respective folders in your Empty4 platform. I hope this help.


taipan
I installed a whole new fresh version of Empty4 and when through his latest setup routine. Works perfect now. Thanks for the help. This forum Rocks!
Author:  lamdog330 [ Fri Sep 13, 2019 1:51 am ]
Post subject:  Hopelessly confused by TDesk or Desky? Ask here.
For the TDesk UBD (USD) Custom Parameters.mq4, is there a way or trick to use more than 8 parameter sets or load more than 2 TDesk UBD (USD) Custom Parameters.mq4 in one terminal?

I am planning to use 2 custom indicators with no source code. Each custom indicator has 4-6 settings per time frame.
Author:  lamdog330 [ Mon Sep 16, 2019 12:18 am ]
Post subject:  Hopelessly confused by TDesk or Desky? Ask here.
With NNF-DESKY, I have to open all the charts for TDesk to work.
With Wavegarrick's HGI Trading, this is not necessary.

What's the difference?
Author:  lamdog330 [ Mon Sep 16, 2019 1:08 am ]
Post subject:  Hopelessly confused by TDesk or Desky? Ask here.
tomele » Mon Jul 29, 2019 12:24 pm wrote:Hi.

When using TD indicators, you must have TDesk on one chart and a chart containing your indis for each pair you want to use. This process can be simplified by saving a template with the desired setup and then clicking "Open all charts" in TDesk. Just make sure that the template name in TDesk and the name of the saved template match.

When using Universal Drones, you only need one chart for TDesk and one chart for your drones, as they are multi-pair and multi-timeframe.

Hope that helps.

Thomas

I found my answer. Hope this helps other newbies.
Author:  lamdog330 [ Mon Sep 23, 2019 6:46 pm ]
Post subject:  Hopelessly confused by TDesk or Desky? Ask here.
I have a question about Peaky Buffer.
Yes I am confused by it and need to understand the logic.

If TradeableRangeDivisor is 2 and Buffers is 4/5, does that means there won't be a Flat signal?
Author:  Vokin [ Tue Sep 24, 2019 9:05 am ]
Post subject:  Hopelessly confused by TDesk or Desky? Ask here.
2019.09.24 10:50:14.036 TDesk_v6_81 XAUUSD,H1: Alert: WARNING: TDesk expires in less than 10 days
..... :youknow:
All times are UTC Page 27 of 71

Powered by phpBB® Forum Software © phpBB Limited