stevehopwoodforex.com
https://www.stevehopwoodforex.com/phpBB3/
Print view

HGIMatrix
https://www.stevehopwoodforex.com/phpBB3/viewtopic.php?t=3973		 Page 28 of 68
Author:  alorente [ Wed Dec 31, 2014 8:56 am ]
Post subject:  HGIMatrix
renexxxx » Wed Dec 31, 2014 6:41 am wrote:I have now changed the code to accommodate pacinvest's requirement, to be able to switch Alerts on by timeframe. As alluded to in my previous post, the AlertOnXXX parameters have now become strings and must be set to a comma-separated list of time frames for which you want to receive Alerts. Obviously, you can't receive Alerts on a time frame that HGIMatrix is not monitoring. So, if the TimeFrames parameter is "240,15", it is no point to set the AlertOnTrendChange parameter to "1440". Also, don't set the parameter to a time frame that doesn't exist, like "241". If it is your aim to break the matrix, you will succeed.

Update 24 anf 24L in Post 1.
Great addition Rene. Very useful.

Since you are able to work miracles with this thing, I will propose an improvement though I have no idea if it can be coded.

When you look at 2 or 3 time frame columns, it is not easy to spot the arrow and wavy changes that occur in the all important 0 candle (current). Is it possible to have 0 candle symbols flash on and off? If that is not feasible, could 0 candle symbols change to a more intense color? For example, if I normally have Trend arrows colored Green, could a 0 candle Trend Arrow appear Lime? Or, normal Fire Brick arrows appear Red on 0 candle? On wavies, If I normally use Dodger Blue, could an 8 buffer 0 candle wavy appear Aqua? etc.

In other words, I am searching for a way to highlight 0 candle symbols and have them revert to normal when they become 1 candle symbols..

Thanks and a Happy New Year to all of you.
Author:  hamburglar [ Wed Dec 31, 2014 7:08 pm ]
Post subject:  HGIMatrix
Firstly thank you to all who have made this a great tool. It is very much appreciated.

Renexxxx,
I am having some trouble with then new HGIMatrixMTF24L. When i load it not all pairs show.(see screen shot) I removed all pairs in the "IncludeSymbols" list and added the AUDCHF (one that was missing). It still would not show in the matrix by intself. Any direction on what to try? Thank you.


Jim
Author:  renexxxx [ Wed Dec 31, 2014 7:15 pm ]
Post subject:  HGIMatrix
Hi Jim,

You obviously have ShowOnlyHurst = true and have not read the thread (or Post 1, for that matter).
Author:  hamburglar [ Wed Dec 31, 2014 7:28 pm ]
Post subject:  HGIMatrix
renexxxx » Wed Dec 31, 2014 12:15 pm wrote:Hi Jim,

You obviously have ShowOnlyHurst = true and have not read the thread (or Post 1, for that matter).

Thanks Renexxxx for the quick response, I did read this but did not realize that the whole pair did not show....

Jim
Author:  pacinvest [ Thu Jan 01, 2015 1:41 am ]
Post subject:  HGIMatrix
Thanks Rene for coding alert for selected time frame. I am very grateful to have this tool in my hot little hands
Author:  renexxxx [ Thu Jan 01, 2015 2:09 am ]
Post subject:  HGIMatrix
I have added the flashing symbols for bar=0, as per Alorente's request (that is, if I interpreted his request correctly). You might notice that the Matrix does not update itself any more outside trading hours (like now) -- the reason for that is that I had to pinch the timer event for switching the colors of the flashing symbols. If this doesn't mean anything to you, don't worry. When new ticks are coming in, the matrix will update again every minute or so.

Incidentally, if you just want to see the signals for bar=0, set ShowMostRecentSignal to false. If you do that, and have ShowOnlyHurst = true, you will not see a lot of signals/symbols. In fact, you will only see those symbols that have a signal on bar=0 (either a wave or an arrow), and agree with the Hurst condition. All signals you do see, should be flashing.

Updates 25 and 25L in post 1.
Author:  josch [ Thu Jan 01, 2015 12:07 pm ]
Post subject:  HNY HGIMatrix
Rene,

not able to contribute here because of lack of coding, but knowing, how software development in commercial systems often is running ('new update!' - 'what's new?' - 'hmm, let me have a look ... ah, new errors'), it's really amazing to follow your pace and results, even during this holiday season!

All, have a Happy New Year and good luck trading.
josch
Author:  passgo [ Thu Jan 01, 2015 10:03 pm ]
Post subject:  HGIMatrix
Happy New Year Renee and my thanks for such a great trading tool.

Over the holiday I missed the leap from version 23 to 25 so have not got a copy of 24. I would prefer not to have the flashing symbols - easier for me to look at one matrix with all recent signals and one with only the new signal and flashing just annoys me - calm head I need!

Would you be very kind and also load version 24 at Post 1 so we can do without the flash. I am sure that is a much simpler solution than any more twiddles!

Here's to 2015 when the markets are open again.
Author:  renexxxx [ Thu Jan 01, 2015 10:05 pm ]
Post subject:  HGIMatrix
passgo » Fri Jan 02, 2015 8:03 am wrote:Happy New Year Renee and my thanks for such a great trading tool.

Over the holiday I missed the leap from version 23 to 25 so have not got a copy of 24. I would prefer not to have the flashing symbols - easier for me to look at one matrix with all recent signals and one with only the new signal and flashing just annoys me - calm head I need!

Would you be very kind and also load version 24 at Post 1 so we can do without the flash. I am sure that is a much simpler solution than any more twiddles!

Here's to 2015 when the markets are open again.
I have added the ShowFlash parameter. Set it to false and you won't see any flashers :lol: ...

Hardly worth to call that a new version, but anyway: 26 and 26L are in post 1.
Author:  passgo [ Thu Jan 01, 2015 10:54 pm ]
Post subject:  HGIMatrix
You are a star! :cheer:
All times are UTC Page 28 of 68

Powered by phpBB® Forum Software © phpBB Limited