stevehopwoodforex.com
https://www.stevehopwoodforex.com/phpBB3/
Print view

Hopelessly confused by TDesk or Desky? Ask here.
https://www.stevehopwoodforex.com/phpBB3/viewtopic.php?t=5546		 Page 5 of 71
Author:  nixxx [ Mon Oct 22, 2018 11:36 pm ]
Post subject:  Hopelessly confused by TDesk or Desky? Ask here.
Hi!
MultiANDSoloSignals means both signals must reach their EntryThreshold for a directional signal or both must be equal or less than their ExitThreshold to give you an exit signal.
When I set SuperSignalsExitOperator = MusltiANDSoloSignals, Super signal is changing to Flat just from one signal (Solo), not both.

Anyone have this problem?
Author:  nixxx [ Thu Oct 25, 2018 12:07 pm ]
Post subject:  Hopelessly confused by TDesk or Desky? Ask here.
Same problem with SuperSignalsEntry = MultiANDSoloSignals. Now it work like a SoloSignalsOnly
Check it out, please.
Author:  tomele [ Thu Oct 25, 2018 2:31 pm ]
Post subject:  Hopelessly confused by TDesk or Desky? Ask here.
Thanks, nixxx.

I will have a look into it.

Cheers
Thomas
Author:  lbs48 [ Fri Oct 26, 2018 12:19 pm ]
Post subject:  Hopelessly confused by TDesk or Desky? Ask here.
nixxx » Tue Oct 23, 2018 12:36 am wrote:Hi!
MultiANDSoloSignals means both signals must reach their EntryThreshold for a directional signal or both must be equal or less than their ExitThreshold to give you an exit signal.
When I set SuperSignalsExitOperator = MusltiANDSoloSignals, Super signal is changing to Flat just from one signal (Solo), not both.

Anyone have this problem?

Hi,
yes, I have the same problem. When I have set for exit MultiANDSolo I give Supersignal from LONG to FLAT earlier, then MUltisignal from LONG to FLAT.
Author:  farhad021 [ Mon Oct 29, 2018 4:42 pm ]
Post subject:  Hopelessly confused by TDesk or Desky? Ask here.
Hello Guys
Leon, I'm sorry but I have a very noob question.so I'm asking it here.I'll be thankful if you clarify this for me.
if I use the TDesk.tpl that you have presented in section 2, then which one of the signals are exactly as same as your section 1 trigger? multi or solo?
if I follow the solo signals for example,does it mean that I'm trading in your section 1 way of trading?

thank you.
Author:  echoman01 [ Mon Oct 29, 2018 9:29 pm ]
Post subject:  Hopelessly confused by TDesk or Desky? Ask here.
Hello,

I have a quick question, but first I need to issue a disclaimer and admit that in terms of coding, I am one of the "nitwits ", I know almost nothing about line coding :( However, I am still trading Nanningbob's 10.6 system on a small live account and netting a small profit every month, so I'm not a complete noob). All my computers at home run Linux, so I run my live Empty4 account on a Windows VPS.

I have successfully loaded and ran various Peaky bots just fine on the VPS.

TDesk however will load, and then freeze. I have double checked and rechecked to make everything is in the correct folders, the correct TDesk compatible indicators, Everything. Tried fresh install of Empty4, same issue.

Finally I signed up for Global-prime's demo. Same issue. I wonder if it's the VPS itself ?

I read that sometimes Empty4 don't like certain VPS Windows servers.

Has anyone else dealt with this issue ?

Thanks in advance, and I want to thank you guys who make this all available.

I may be able to actually retire someday... :-)
Author:  SteveHopwood [ Mon Oct 29, 2018 9:52 pm ]
Post subject:  Hopelessly confused by TDesk or Desky? Ask here.
echoman01 » Mon Oct 29, 2018 9:29 pm wrote:Hello,

I have a quick question, but first I need to issue a disclaimer and admit that in terms of coding, I am one of the "nitwits ", I know almost nothing about line coding :( However, I am still trading Nanningbob's 10.6 system on a small live account and netting a small profit every month, so I'm not a complete noob). All my computers at home run Linux, so I run my live Empty4 account on a Windows VPS.

I have successfully loaded and ran various Peaky bots just fine on the VPS.

TDesk however will load, and then freeze. I have double checked and rechecked to make everything is in the correct folders, the correct TDesk compatible indicators, Everything. Tried fresh install of Empty4, same issue.

Finally I signed up for Global-prime's demo. Same issue. I wonder if it's the VPS itself ?

I read that sometimes Empty4 don't like certain VPS Windows servers.

Has anyone else dealt with this issue ?

Thanks in advance, and I want to thank you guys who make this all available.

I may be able to actually retire someday... :-)
Great to read that you are making profits. :clap: :clap: :clap: :clap: :clap: :clap: :clap:

Re a VPS, try our SHF recommended one at http://www.stevehopwoodforex.com/phpBB3 ... 50#p156450. Tell Eaymon from me that he has to let you try it out for free for a few days before subscribing. He will not argue.

Eaymon's VPS is fantastic so you need to be subscribing to it regardless. No harm in trying it for free for a few days first, though.

:xm: :rocket:
Author:  zaguy [ Tue Oct 30, 2018 7:44 am ]
Post subject:  Hopelessly confused by TDesk or Desky? Ask here.
SteveHopwood » Mon Oct 29, 2018 11:52 pm wrote:
echoman01 » Mon Oct 29, 2018 9:29 pm wrote:Hello,

I have a quick question, but first I need to issue a disclaimer and admit that in terms of coding, I am one of the "nitwits ", I know almost nothing about line coding :( However, I am still trading Nanningbob's 10.6 system on a small live account and netting a small profit every month, so I'm not a complete noob). All my computers at home run Linux, so I run my live Empty4 account on a Windows VPS.

I have successfully loaded and ran various Peaky bots just fine on the VPS.

TDesk however will load, and then freeze. I have double checked and rechecked to make everything is in the correct folders, the correct TDesk compatible indicators, Everything. Tried fresh install of Empty4, same issue.

Finally I signed up for Global-prime's demo. Same issue. I wonder if it's the VPS itself ?

I read that sometimes Empty4 don't like certain VPS Windows servers.

Has anyone else dealt with this issue ?

Thanks in advance, and I want to thank you guys who make this all available.

I may be able to actually retire someday... :-)
Great to read that you are making profits. :clap: :clap: :clap: :clap: :clap: :clap: :clap:

Re a VPS, try our SHF recommended one at http://www.stevehopwoodforex.com/phpBB3 ... 50#p156450. Tell Eaymon from me that he has to let you try it out for free for a few days before subscribing. He will not argue.

Eaymon's VPS is fantastic so you need to be subscribing to it regardless. No harm in trying it for free for a few days first, though.

:xm: :rocket:

Dear Steve and Tomele,

I also had instances were all is set up correctly, trades are taken and after some time elapsed (30 mins or so) then suddenly TDesk freezes as a result of a zero divide error. I trade 28 pairs and have run the script "ForceLoadHistoricalData". I use Global Prime on a Demo Account.

I am not sure what can be causing it.

Regards,
Coenraad (zaguy)
Author:  tomele [ Tue Oct 30, 2018 11:20 am ]
Post subject:  Hopelessly confused by TDesk or Desky? Ask here.
Hi Coenraad.

Thanks for the feedback. It will be fixed in the next version.

Cheers
Thomas
Author:  echoman01 [ Tue Oct 30, 2018 5:04 pm ]
Post subject:  Hopelessly confused by TDesk or Desky? Ask here.
@ Steve Checking into Eaymon's VPS right now...thanks much ! :)
All times are UTC Page 5 of 71

Powered by phpBB® Forum Software © phpBB Limited