stevehopwoodforex.com
https://www.stevehopwoodforex.com/phpBB3/
Print view

10.7/10.9 INDI SOLUTIONS
https://www.stevehopwoodforex.com/phpBB3/viewtopic.php?t=3550		 Page 6 of 72
Author:  milanese [ Tue Apr 08, 2014 12:39 am ]
Post subject:  10.7/10.9 INDI SOLUTIONS
James Roscoe » Tue Apr 08, 2014 12:37 am wrote:I was looking at the alert section of the code.

if((ShowCounterTrend==true && UseOnly7_2forEntryAlert==false && ShowOnlyBuyEntryAlerts==false) && ((UseSwapFilter==true && actual_short_swap>=0)

I did not see an alert line for this

if((ShowCounterTrend==false && UseOnly7_2forEntryAlert==false && ShowOnlyBuyEntryAlerts==false) && ((UseSwapFilter==false && actual_short_swap>=0)

I am not a coder but I can read it a little. I wondering if that could be the issue.
no it is intended so if there is no swapfilter set no need to check the swap...

Cheers :)

Tommaso
Author:  James Roscoe [ Tue Apr 08, 2014 12:53 am ]
Post subject:  10.7/10.9 INDI SOLUTIONS
milanese » Tue Apr 08, 2014 12:39 am wrote:
James Roscoe » Tue Apr 08, 2014 12:37 am wrote:I was looking at the alert section of the code.

if((ShowCounterTrend==true && UseOnly7_2forEntryAlert==false && ShowOnlyBuyEntryAlerts==false) && ((UseSwapFilter==true && actual_short_swap>=0)

I did not see an alert line for this

if((ShowCounterTrend==false && UseOnly7_2forEntryAlert==false && ShowOnlyBuyEntryAlerts==false) && ((UseSwapFilter==false && actual_short_swap>=0)

I am not a coder but I can read it a little. I wondering if that could be the issue.
no it is intended so if there is no swapfilter set no need to check the swap...

Cheers :)

Tommaso
You are the fastest tech support I have ever seen! Thanks!
Author:  James Roscoe [ Tue Apr 08, 2014 2:09 am ]
Post subject:  10.7/10.9 INDI SOLUTIONS
Okay, I swapped the old indi out with the lastest indi, double checked the parameters. Still getting sto7 signals independently of D1 and W1 stochs.

Is the indi meant to be used on the H1 timeframe?
Author:  Ashflash [ Tue Apr 08, 2014 6:40 am ]
Post subject:  10.7/10.9 INDI SOLUTIONS
Hi,

I noticed this afternoon, (4pm AUST Time) that both AUD/USD & XAU/USD Weekly STO flipped from the Short to the Long side, ie: The RED line was on the bottom this morning but now it's on the top.

Did anyone else notice this?

I was of the belief that the weekly STO was set for the week by the Asian open on Tuesday.

Is this correct or am I missing something?

I am using the latest version "10.7_3.22STO_wTS_ HT ALERT.mq4"

Thanks in advance.

Regards

Ash
Author:  DocT [ Tue Apr 08, 2014 7:04 am ]
Post subject:  10.7/10.9 INDI SOLUTIONS
Does anyone have a simple indi which gives the range in pips from current price to previous high/low?
Thanks
Doc
Author:  spotdespot [ Tue Apr 08, 2014 7:08 am ]
Post subject:  10.7/10.9 INDI SOLUTIONS
Ashflash » Tue Apr 08, 2014 7:40 am wrote:Hi,

I noticed this afternoon, (4pm AUST Time) that both AUD/USD & XAU/USD Weekly STO flipped from the Short to the Long side, ie: The RED line was on the bottom this morning but now it's on the top.

Did anyone else notice this?

I was of the belief that the weekly STO was set for the week by the Asian open on Tuesday.

Is this correct or am I missing something?

I am using the latest version "10.7_3.22STO_wTS_ HT ALERT.mq4"

Thanks in advance.

Regards

Ash
Ash - read these for an explanation:
http://www.stevehopwoodforex.com/phpBB3 ... 025#p90025
http://www.stevehopwoodforex.com/phpBB3 ... 035#p90035

Cheers,
Dave.
Author:  Over60 [ Tue Apr 08, 2014 7:47 am ]
Post subject:  10.7/10.9 INDI SOLUTIONS
@Taggie

Concerning the display of the price-action, you can try the attached one.
By adapting the parameter “ExtDepth” you will modify the periods between HLs in the TFs.
It should display the pip-movement and work with B6XX.

Over 60
Author:  DocT [ Tue Apr 08, 2014 7:55 am ]
Post subject:  10.7/10.9 INDI SOLUTIONS
Over60 » Tue Apr 08, 2014 7:47 am wrote:@Taggie

Concerning the display of the price-action, you can try the attached one.
By adapting the parameter “ExtDepth” you will modify the periods between HLs in the TFs.
It should display the pip-movement and work with B6XX.

Over 60
Thanks - will give it a go.
Cheers
Author:  milanese [ Tue Apr 08, 2014 8:13 am ]
Post subject:  10.7/10.9 INDI SOLUTIONS
James Roscoe » Tue Apr 08, 2014 2:09 am wrote:Okay, I swapped the old indi out with the lastest indi, double checked the parameters. Still getting sto7 signals independently of D1 and W1 stochs.

Is the indi meant to be used on the H1 timeframe?
As I told no, 10.9 for D1 10.7 for H4 !!!

Cheers :)

Tommaso
Author:  Over60 [ Tue Apr 08, 2014 9:36 am ]
Post subject:  10.7/10.9 INDI SOLUTIONS
Hi Milanese,

I found that after restart of the plattform, the defaults of the indicators 10.7, 10.9 will always reset and start with the basic, origin defaults.
I did not yet try do save the current template with adapted indi-defaults, because of active orders in different markets.
Maybe some advice, not only for me should be helpful.

Using 10.9 daily chart, the 10.9 indicator displays in the indi-window left above corner 10.7.
Does it is correct? Is it the same indi, also used in the same manner in H1, H4 TFs?

The origin template 10.7 with 240/60 by using the template however seems to be right.

Maybe the labels in the templates should display in addition “used for H1, H4… daily only” etc.
10.9/10.7 simple daily chart is OK.

Only cosmetics with the next update to avoid getting confuse and messy with the different strategies.

Trade well and kind regards
Over60
All times are UTC Page 6 of 72

Powered by phpBB® Forum Software © phpBB Limited