stevehopwoodforex.com
https://www.stevehopwoodforex.com/phpBB3/
Print view

Hopelessly confused by TDesk or Desky? Ask here.
https://www.stevehopwoodforex.com/phpBB3/viewtopic.php?t=5546		 Page 58 of 71
Author:  Findogg [ Tue Aug 10, 2021 2:01 am ]
Post subject:  Hopelessly confused by TDesk or Desky? Ask here.
bodavid » Sun Jul 25, 2021 1:58 pm wrote:
Findogg » Fri Jul 23, 2021 6:12 pm wrote:Does anyone happen to have a Swing_ZZ compatible with TD, tucked away anywhere? or a UBD for that matter? Coding is completely foreign to me so I wouldn't dare attempt to try make it compatible myself.
This is a version I have used...
Hope it helps...
I am playing around with the Swing_ZZ indi and UBD that was kindly shared.
Is there a way in which the indi or UBD can be modified so that the ZZ signal going through to TDesk holds for longer than just the current candle?
For example, once the ZZ prints and signals up or down I want that signal to hold until an opposite ZZ signal appears.

Thanks
Author:  bodavid [ Tue Aug 10, 2021 2:31 am ]
Post subject:  Hopelessly confused by TDesk or Desky? Ask here.
Findogg » Tue Aug 10, 2021 9:01 am wrote:
bodavid » Sun Jul 25, 2021 1:58 pm wrote:
Findogg » Fri Jul 23, 2021 6:12 pm wrote:Does anyone happen to have a Swing_ZZ compatible with TD, tucked away anywhere? or a UBD for that matter? Coding is completely foreign to me so I wouldn't dare attempt to try make it compatible myself.
This is a version I have used...
Hope it helps...
I am playing around with the Swing_ZZ indi and UBD that was kindly shared.
Is there a way in which the indi or UBD can be modified so that the ZZ signal going through to TDesk holds for longer than just the current candle?
For example, once the ZZ prints and signals up or down I want that signal to hold until an opposite ZZ signal appears.

Thanks
Use the USD version...
You should learn to set it up yourself as it is very easy and saves you time...
Look at
viewtopic.php?f=106&t=5538&p=172862#p172862
Author:  Findogg [ Tue Aug 10, 2021 3:58 am ]
Post subject:  Hopelessly confused by TDesk or Desky? Ask here.
bodavid » Tue Aug 10, 2021 2:31 pm wrote:
Use the USD version...
You should learn to set it up yourself as it is very easy and saves you time...
Look at
viewtopic.php?f=106&t=5538&p=172862#p172862
Thanks Bodavid, really appreciate it. :hi: I did have a look through and 'attempted' some edits via metaeditor to make indi's TD compatible....but at the moment the whole coding thing is completely foreign to me....a duck out of water.
Will invest some time
Author:  Findogg [ Tue Aug 10, 2021 4:03 am ]
Post subject:  Hopelessly confused by TDesk or Desky? Ask here.
bodavid » Tue Aug 10, 2021 2:31 pm wrote:
Findogg » Tue Aug 10, 2021 9:01 am wrote:
bodavid » Sun Jul 25, 2021 1:58 pm wrote:
Findogg » Fri Jul 23, 2021 6:12 pm wrote:Does anyone happen to have a Swing_ZZ compatible with TD, tucked away anywhere? or a UBD for that matter? Coding is completely foreign to me so I wouldn't dare attempt to try make it compatible myself.
This is a version I have used...
Hope it helps...
I am playing around with the Swing_ZZ indi and UBD that was kindly shared.
Is there a way in which the indi or UBD can be modified so that the ZZ signal going through to TDesk holds for longer than just the current candle?
For example, once the ZZ prints and signals up or down I want that signal to hold until an opposite ZZ signal appears.

Thanks
Use the USD version...
You should learn to set it up yourself as it is very easy and saves you time...
Look at
viewtopic.php?f=106&t=5538&p=172862#p172862
One last question (hopefully) :D ....Can you edit the ZZ value via the USD Drone? i.e. Swing ZZ indi default is 'min bars 2', if I wanted to change that value do you do it in the USD or do I have to edit the indi settings and save a new indicator?
Author:  bodavid [ Tue Aug 10, 2021 4:13 am ]
Post subject:  Hopelessly confused by TDesk or Desky? Ask here.
Findogg » Tue Aug 10, 2021 11:03 am wrote:
bodavid » Tue Aug 10, 2021 2:31 pm wrote:
Findogg » Tue Aug 10, 2021 9:01 am wrote:
bodavid » Sun Jul 25, 2021 1:58 pm wrote:
Findogg » Fri Jul 23, 2021 6:12 pm wrote:Does anyone happen to have a Swing_ZZ compatible with TD, tucked away anywhere? or a UBD for that matter? Coding is completely foreign to me so I wouldn't dare attempt to try make it compatible myself.
This is a version I have used...
Hope it helps...
I am playing around with the Swing_ZZ indi and UBD that was kindly shared.
Is there a way in which the indi or UBD can be modified so that the ZZ signal going through to TDesk holds for longer than just the current candle?
For example, once the ZZ prints and signals up or down I want that signal to hold until an opposite ZZ signal appears.

Thanks
Use the USD version...
You should learn to set it up yourself as it is very easy and saves you time...
Look at
viewtopic.php?f=106&t=5538&p=172862#p172862
One last question (hopefully) :D ....Can you edit the ZZ value via the USD Drone? i.e. Swing ZZ indi default is 'min bars 2', if I wanted to change that value do you do it in the USD or do I have to edit the indi settings and save a new indicator?
For me the easiest way is to make an indicator with the default settings that i want and use that indicator in the UBD/USD.
Like attached...
But if you are able to read you should be able to put in the values yourself...
Author:  Findogg [ Tue Aug 10, 2021 4:16 am ]
Post subject:  Hopelessly confused by TDesk or Desky? Ask here.
Thanks, yip I did exactly that and was pretty straight forward. Edited the default indi values to the required settings then save new indi and then have USD call in the new indi to generate signals.
Awesome, thanks for your help!! :clap:
Author:  bodavid [ Tue Aug 10, 2021 4:21 am ]
Post subject:  Hopelessly confused by TDesk or Desky? Ask here.
Findogg » Tue Aug 10, 2021 11:16 am wrote:Thanks, yip I did exactly that and was pretty straight forward. Edited the default indi values to the required settings then save new indi and then have USD call in the new indi to generate signals.
Awesome, thanks for your help!! :clap:
Great!
You get a kick when you are able to create these things yourself...
Author:  ishak123 [ Mon Aug 23, 2021 10:54 am ]
Post subject:  Hopelessly confused by TDesk or Desky? Ask here.
Hi
I am try to use to custom indicator with Tdesk. .
I am bit confuse why While using Universal Buffer drone a custom indicator show signal twice TF with one column signal and another extra other column. While I use one TF, Please see attach picture and guide how to resolve this. many thanks.
Author:  tomele [ Mon Aug 23, 2021 11:16 am ]
Post subject:  Hopelessly confused by TDesk or Desky? Ask here.
I would suspect you have two instances of DIL and of Spr running.
Author:  ishak123 [ Mon Aug 23, 2021 11:41 am ]
Post subject:  Hopelessly confused by TDesk or Desky? Ask here.
tomele » Mon Aug 23, 2021 12:16 pm wrote:I would suspect you have two instances of DIL and of Spr running.
Thanks for reply, no other instance running. I attached both Indicator here, might be some thing wrong with indicator, when I run indicator on separately on chart it is fine. If I use universal buffer drone for all symbol, it goes wrong. Thanks for your help.
All times are UTC Page 58 of 71

Powered by phpBB® Forum Software © phpBB Limited