swingONE

Post Reply
markft
Trader
Posts: 82
Joined: Thu Dec 08, 2011 12:06 pm
Location: Sydney, Australia

Re: swingONE

Post by markft »

Khalaad wrote:The ghost of version 1.9.5 (removed yesterday) is still trading the Divisa demo, and forcing the wrong lot sizes.

Maybe I did not do the Empty4 restarts last night; I have most definitevly done so now.

Let's see what happens.

Khalid
It is great you found this.

I can see all kinds of funny stuff in the logs such as the 1.9.5 version opening a trade and then the 1.9.9 closing it:

04:31:47 swingONE_1.9.5 GBPUSD,H4: open #2710017 buy 1.00 GBPUSD at 1.55566 ok
04:31:47 swingONE_1.9.5 GBPUSD,H4: modify #2710017 buy 1.00 GBPUSD at 1.55566 sl: 1.55186 tp: 0.00000 ok
04:31:47 swingONE_1.9.9 GBPUSD,H4: New bar, cross is Cross up
04:31:47 swingONE_1.9.9 GBPUSD,H4: close #2710017 buy 1.00 GBPUSD at 1.55566 sl: 1.55186 at price 1.55542
04:31:48 swingONE_1.9.9 GBPUSD,H4: New bar, cross is Cross up

I have seen the Empty4 do this before. Even after you remove an EA from a chart it continues to run it as an unexplained feature :) Best solution I found is to restart it after changing something.

I have also seen Myfxbook login error faults in the logs. Myfxbook EA does not need to run as well as it now collects data using the investor password. Probably another case of an EA continuing to run.

One silver lining is at least having the EA version in the file name made this error obvious. Otherwise it would have been very difficult to figure out the reason.

Kind Regards,
Mahmut
fx800
Trader
Posts: 1334
Joined: Sun Dec 04, 2011 4:11 am

Re: swingONE

Post by fx800 »

markft wrote:
fx8000 wrote:Hi Mahmut,

I have changed the multiplier code = 1 for the MPTM EA as you suggested but the same problem happened again this a.m. Shortly after 6 am gmt, two shorts were sent and both closed almost immediately beccause stop loss hit.

I have since removed the MPTM EA again.

Attached below is the experts log.

Many thanks.

Cheers,
Peter
Hi Peter,

Hmm, I am not familiar with the MPTM and there are a few versions around. There must be another similar condition that calculates stop loss to 0 when the crim reports Digits = 0 for the MPTM.

I can see log lines such as
06:08:32 MPTM 30+0 PC1 JS30.mq4 mod GBPJPY,Weekly: Alert: Stop loss hit. Close of US30 ticket no 107792
which confirm it is the MPTM.

Perhaps you can contact Steve to resolve it. If he is busy I can give it a shot if you can post the version you are using.

I would suggest remove MPTM as you have already done for the time being. The swingOne EA sets the stoploss as well so there is no reason to run MPTM for stop loss alone.

Cheers mate,
Mahmut

Hi Mahmut,

I would not like to take up any more of your time. I would just avoid using MPTM for managing Swingone's trades.

I use MPTM to part close at breakeven, and it is a luxury I can easily do without.

Thank you very much for all your help.

Best regards,
Peter
User avatar
gaheitman
Trader
Posts: 655
Joined: Tue Nov 15, 2011 10:55 pm
Location: Richmond, VA, US

Re: swingONE

Post by gaheitman »

Khalaad wrote:
markft wrote: I have seen the Empty4 do this before. Even after you remove an EA from a chart it continues to run it as an unexplained feature :) Best solution I found is to restart it after changing something.
Kind Regards,
Mahmut
Mahmut,

This is what I have just learnt: the only solution should be to do a complete clean up of Empty4, and reinstallation. :idea: Particularly if trading real money.

Because even after three restarts, the 1.9.5 has traded again. :twisted:

Please see the chart, and the log.

I have temporarily shut down the demo until I have time to do the clean up and the new installation.

Khalid
I'm pretty sure if you find the ex4 and mq4 files that go with the older version and rename them and then reboot your PC/Server it won't run again.

For fun, can you click on the Window menu item and make sure that your don't have another chart window up that is not showing up in the chart tabs along the bottom?

George
fx800
Trader
Posts: 1334
Joined: Sun Dec 04, 2011 4:11 am

Re: swingONE

Post by fx800 »

fx8000 wrote:Results of demo account on swingONE 1.9.5 from 16th January till close of trading on 19th Jan.

10 pairs : GU, EU, AU, GJ, EJ, AJ, NU, NJ, USDCHF, EURAUD.

H4 charts, trade 24 hrs, OOTB, Hanover D1 slope confirmation candles 2.

Cheers,
Peter
Further demo account update till close of trading yesterday. Nice equity curve, but how long will it last ?

Cheers,
Peter
You do not have the required permissions to view the files attached to this post.
Last edited by Anonymous on Fri Jan 27, 2012 7:10 am, edited 3 times in total.
fx800
Trader
Posts: 1334
Joined: Sun Dec 04, 2011 4:11 am

Re: swingONE

Post by fx800 »

Khalaad wrote:
fx8000 wrote: Further update till close of trading yesterday. Nice equity curve, but how long will it last ?

Cheers,
Peter
Peter,

What is the Criminal's GMT off-set?

Thank you.

Khalid

Hi Khalid, criminal is FXDD and GMT+2.

Cheers,
Peter
Last edited by Anonymous on Fri Jan 27, 2012 7:11 am, edited 1 time in total.
AltosT
Trader
Posts: 85
Joined: Mon Nov 21, 2011 8:44 am
Location: Australia

Re: swingONE

Post by AltosT »

Hi Khalid - I have a test running on Vantage FX trading EUDUSD AND GBPUSD - KINDA DOUBLE JEOPARDY :-) oops, caps off.

Will maybe post it if it starts to look worthwhile. A bit slow for my liking though.

All the best,
AltosT
fx800
Trader
Posts: 1334
Joined: Sun Dec 04, 2011 4:11 am

Re: swingONE

Post by fx800 »

Hi Khalid,

I just edited my earlier post which says " end of trading this WEEK " !

I am having some time off right now, and can't imagine how on earth I thought it's Saturday today !!


Cheers,
Peter
fx800
Trader
Posts: 1334
Joined: Sun Dec 04, 2011 4:11 am

Re: swingONE

Post by fx800 »

Khalaad wrote:
fx8000 wrote:Hi Khalid,

I just edited my earlier post which says " end of trading this WEEK " !

I am having some time off right now, and can't imagine how on earth I thought it's Saturday today !!


Cheers,
Peter
Not a problem. :)

I have found your results very useful.

Thank you. :)

Khalid

You are most kind. Will post results again after the close of the trading week.

Cheers,
Peter
fx800
Trader
Posts: 1334
Joined: Sun Dec 04, 2011 4:11 am

Re: swingONE

Post by fx800 »

Hi Khalid,

I copied DumpHistory.mq4 to scripts, compiled, dragged it on to a chart, but nothing happened.

Can you please tell me how to go about it ?

Cheers,
Peter
Last edited by Anonymous on Sat Jan 28, 2012 1:23 am, edited 1 time in total.
User avatar
gaheitman
Trader
Posts: 655
Joined: Tue Nov 15, 2011 10:55 pm
Location: Richmond, VA, US

Re: swingONE

Post by gaheitman »

The script should have created a file in the experts\files directory....

George
Post Reply

Return to “Automated trading systems”