stevehopwoodforex.com
https://www.stevehopwoodforex.com/phpBB3/
Print view

HGI Hurst Trader
https://www.stevehopwoodforex.com/phpBB3/viewtopic.php?t=4009		 Page 7 of 18
Author:  kabitto [ Mon Dec 29, 2014 7:38 pm ]
Post subject:  HGI Hurst Trader
AUDNZD trade does not want to close - slope status is WEAK
got bombarded with errors:

close due to slope weakness
close AUDNZD.dma failed.

seems to be glich ? :)
Author:  kwchau [ Tue Dec 30, 2014 12:01 am ]
Post subject:  HGI Hurst Trader
SpiderX » Mon Dec 29, 2014 11:45 pm wrote:
kwchau » Mon Dec 29, 2014 8:45 pm wrote:Still have problems taking trade with wave (buffer 7) signal, please see attached chart.
Thanks for your attention.
Hi

This tests out fine on my backtester.
Perhaps you have enabled EntryOnWaveAndTrend, then EntryOnWave is disabled.

Cheers
I haven't enabled EntryOnWaveAndTrend and EntryOnWave is enabled. so it is not the setting.

I have reviewed the trades taken so far, they are all buy trades, including Trend, Rad and Wave trades. All sell trades are not taken, including the wave sell. I have checked I have enable both TradeLong and TradeShort.

I hope this help to pinpoint the bug, thank you so much for your help.
Author:  SpiderX [ Tue Dec 30, 2014 12:46 am ]
Post subject:  HGI Hurst Trader
kwchau » Tue Dec 30, 2014 8:01 am wrote:
I haven't enabled EntryOnWaveAndTrend and EntryOnWave is enabled. so it is not the setting.

I have reviewed the trades taken so far, they are all buy trades, including Trend, Rad and Wave trades. All sell trades are not taken, including the wave sell. I have checked I have enable both TradeLong and TradeShort.

I hope this help to pinpoint the bug, thank you so much for your help.
Hi

Thanks for the feedback ! And yes it helped to pinpoint the bug.
v1.03c is in post 1.
Apologies for the mistakes.


30 Dec 14:v1.03c
-Further bug fixes in LookForTrading
-CloseTheTrade only prints the CloseTrade status when the closing criteria is met.
Previously it prints before that and could result in multiple prints if closing criteria is not met.

Cheers
Author:  SpiderX [ Tue Dec 30, 2014 12:51 am ]
Post subject:  HGI Hurst Trader
kabitto » Tue Dec 30, 2014 3:38 am wrote:AUDNZD trade does not want to close - slope status is WEAK
got bombarded with errors:

close due to slope weakness
close AUDNZD.dma failed.

seems to be glich ? :)
Hi,

There is a small mistake which could cause "close due to slope weakness" to be printed multiple times due to Minimum Trade time not met.
This is fixed in v1.03c.

However for trade close failure...not sure if it is a broker issue that caused the closing to fail.
The closing code seems to work fine for the rest.
Let me think about it.
Please try the latest version and see if anything changes.

Cheers
Author:  kabitto [ Tue Dec 30, 2014 1:49 am ]
Post subject:  HGI Hurst Trader
not sure what went wrong with c version.
but as soon as i put it on, i get tons of trades without trade comments and without a HGI signal in place.
reverting to older version seems to do the trick.

SpiderX » Tue Dec 30, 2014 3:51 am wrote:
kabitto » Tue Dec 30, 2014 3:38 am wrote:AUDNZD trade does not want to close - slope status is WEAK
got bombarded with errors:

close due to slope weakness
close AUDNZD.dma failed.

seems to be glich ? :)
Hi,

There is a small mistake which could cause "close due to slope weakness" to be printed multiple times due to Minimum Trade time not met.
This is fixed in v1.03c.

However for trade close failure...not sure if it is a broker issue that caused the closing to fail.
The closing code seems to work fine for the rest.
Let me think about it.
Please try the latest version and see if anything changes.

Cheers
Author:  SpiderX [ Tue Dec 30, 2014 2:11 am ]
Post subject:  HGI Hurst Trader
kabitto » Tue Dec 30, 2014 9:49 am wrote:not sure what went wrong with c version.
but as soon as i put it on, i get tons of trades without trade comments and without a HGI signal in place.
reverting to older version seems to do the trick.
doh.... :?

Thanks for the feedback
v1.03d is in post 1.

30 Dec 14:v1.03d
-Further bug fixes in LookForTrading

Sorry to all for the multiple bug fixes...didnt realize that adding a disableHurst option would result in so many issues.

cheers
Author:  sim2505 [ Tue Dec 30, 2014 10:36 am ]
Post subject:  HGI Hurst Trader
I think there is a small issue when the SL management is true because when I turn it to false, no problem ;)

Just a quick question: Is there an option in MPTM or others EA have the option:
Close all trades when one trade reach the SL ?
Author:  SpiderX [ Tue Dec 30, 2014 11:47 am ]
Post subject:  HGI Hurst Trader
sim2505 » Tue Dec 30, 2014 6:36 pm wrote:I think there is a small issue when the SL management is true because when I turn it to false, no problem ;)

Just a quick question: Is there an option in MPTM or others EA have the option:
Close all trades when one trade reach the SL ?
Dont recall such an option.
Let me check what is wrong with this one.

Cheers
Author:  sim2505 [ Tue Dec 30, 2014 12:16 pm ]
Post subject:  HGI Hurst Trader
SpiderX » Tue Dec 30, 2014 11:47 am wrote:
sim2505 » Tue Dec 30, 2014 6:36 pm wrote:I think there is a small issue when the SL management is true because when I turn it to false, no problem ;)

Just a quick question: Is there an option in MPTM or others EA have the option:
Close all trades when one trade reach the SL ?
Dont recall such an option.
Let me check what is wrong with this one.

Cheers
OK, Thank you Spider
Author:  SpiderX [ Tue Dec 30, 2014 1:49 pm ]
Post subject:  HGI Hurst Trader
sim2505 » Tue Dec 30, 2014 8:16 pm wrote:
OK, Thank you Spider
Hi

Suspect your JumpingStopPips is set to zero thus causing the issue, but it is nothing major.

v1.03e is in post 1.
30 Dec 14:v1.03e
-Further code improvements in LookForTrading and ManageStopLoss

Cheers
All times are UTC Page 7 of 18

Powered by phpBB® Forum Software © phpBB Limited