Awesome work to Thomas on the Universal Signal Drone, thought I'd kick off the first custom set for it
It's a trend following indicator, both the top and bottom arrows need to align for a valid signal otherwise you'll get a flat signal.
| stevehopwoodforex.com https://www.stevehopwoodforex.com/phpBB3/ Print view |
|
| TDesk Universal Drones https://www.stevehopwoodforex.com/phpBB3/viewtopic.php?t=5654 |
Page 7 of 23 |
| Author: | tomele [ Sun May 05, 2019 3:45 pm ] |
| Post subject: | TDesk Universal Drones |
Hi @all. The USD lessons are available at http://www.stevehopwoodforex.com/phpBB3 ... 106&t=5655 |
|
| Author: | wallywonka [ Mon May 06, 2019 3:15 am ] |
| Post subject: | TDesk Universal Drones |
Awesome work to Thomas on the Universal Signal Drone, thought I'd kick off the first custom set for it It's a trend following indicator, both the top and bottom arrows need to align for a valid signal otherwise you'll get a flat signal. |
|
| Author: | tomele [ Mon May 06, 2019 11:48 pm ] |
| Post subject: | TDesk Universal Drones |
Fantastic. I love early adopters.  Cheers Thomas |
|
| Author: | wallywonka [ Wed May 08, 2019 1:02 am ] |
| Post subject: | TDesk Universal Drones |
Here is another one for the collection that's proved to be popular in the past, The MegaFX indicator! Threw it up for 24 hours while testing and collected some 400 pips (probably luck) Have fun. |
|
| Author: | tomele [ Wed May 08, 2019 11:55 am ] |
| Post subject: | TDesk Universal Drones |
Hi @all. UBD version 1.7 is in post 2. Only screen output fixes. Cheers Thomas |
|
| Author: | taipan [ Thu May 09, 2019 2:06 am ] |
| Post subject: | TDesk Universal Drones |
Any coder can help to make this indicators to become TDesk Universal Drones ? See chart image and indicators & template attached. The indicator to be made is called CCFpmq4. Once the highligted divergence thicken pairs signal crossover are highlighted on the chart, we can created buy or sell depend on which direction the pair went. I have made the CCFpmq4 currencies the same color as 10.7 CSS. But I cannot made CCFp mtf 2.8- Simplied by R indi the same color as 10.7 CSS as it is .ex4 file. |
|
| Author: | tomele [ Thu May 09, 2019 12:17 pm ] |
| Post subject: | PeakyBuffers |
Hi @all. Attached is PeakyBuffers, an indicator based on Steve's PeakHiLo indicator and optimized for use with UBD. The main settings are: NumberOfBars: The indi looks for peak high / peak low within this number of bars window. TradeableRangeDivisor: The high/low range gets divided into this number of sections. You can decide that signals are only valid when the price is in the topmost (short) and the lowermost (long) section. FreezeTradeableRange: As the opposite peaks scroll out of the window, the sections usually narrow over time. You can inhibit that and freeze the sections to the size they had when the signal started. The attached UBD setfile doesn't use the sections. The signal is always long or short and identical to the original PeakHiLo indicator with default settings. If you want to have directional signals only when the price is in the two outer sections, you just have to use other buffers: Buffers 0/1 (or 2/3) are always long/short Buffers 4/5 (or 6/7) are only long/short in the outer sections 2019-06-16 Attention: The default for TradeableRangeDivisor has changed from 6 to 2. Cheers Thomas . |
|
| Author: | tomele [ Thu May 09, 2019 2:54 pm ] |
| Post subject: | SlopyBuffers |
Hi @all. And here is SlopyBuffers, an indicator based on Baluda's SuperSlope indicator and optimized for use with UBD. The main settings are the same as in the original. Mind that due to comparability reasons the slope threshold is the difference between the lower and the upper one. The attached UBD setfile delivers exactly the same signals as Baluda SuperSlope TD V2. They don't use a threshold and therefore are always long or short. If you want to use a threshold, you can either change the default in the indicator code, or use buffer 0 (the slope buffer) and compare it to a constant value (half of the threshold). Buffer 0 is the slope value Buffers 1/2/3 are holding values when long/short/flat Cheers Thomas . |
|
| Author: | tomele [ Fri May 10, 2019 9:35 am ] |
| Post subject: | TDesk Universal Drones |
Hi @all. The code of SlopyBuffers turned out to be faulty. A corrected version is in the post above. Cheers Thomas |
|
| Author: | wallywonka [ Sat May 11, 2019 8:00 am ] |
| Post subject: | TDesk Universal Drones |
Here is a UBD setfile for the TDI-RT-Clone Indicator. |
|
| All times are UTC | Page 7 of 23 |
|
Powered by phpBB® Forum Software © phpBB Limited |
|