stevehopwoodforex.com
https://www.stevehopwoodforex.com/phpBB3/
Print view

10.4 A Complete System
https://www.stevehopwoodforex.com/phpBB3/viewtopic.php?t=1481		 Page 602 of 745
Author:  Tao [ Tue Jul 02, 2013 11:59 am ]
Post subject:  Re: 10.4 A Complete System
nanningbob wrote:
Jemook wrote:I've attached the indicator is the one I use and I can confirm it doesn't have bugs like your current one.
MTF TMA Slope RSI Visual.ex4
This works like the STO 5 With RSI 2, nearly the same. Anyway is there anyway to clean up the lower right hand corner?
Double Click on it to choose the object, then press "delete".
Author:  nanningbob [ Tue Jul 02, 2013 1:04 pm ]
Post subject:  Re: 10.4 A Complete System
I like July, off to a good start. Doing well on USD, EURO strength per CSS info page along with aud, gbp, jpy weakness. Learn to use that info page, gets most of your trades on the correct direction along with your 240 reads. :)
Author:  cmeade2 [ Tue Jul 02, 2013 1:19 pm ]
Post subject:  Re: 10.4 A Complete System
Bob

What time zone are you living in? Even though you are on the east coast, I see that you are posting in the middle of the night.

cmeade2
Author:  thelearner [ Tue Jul 02, 2013 2:17 pm ]
Post subject:  Re: 10.4 A Complete System
yea, I know it comes with the default Empty4 indicators, i just don't remember the parameters. Thank you everyone for replying :D
Author:  jakuza [ Tue Jul 02, 2013 2:37 pm ]
Post subject:  Re: 10.4 A Complete System
Hi Everyone:
I have traded this system for a week and I like the result but I still have a lot to learn and I'm trying to press through all of the forum post's.

I do have a pressing question while I'm still catching up on my knowledge of this system. I ran the profile 104 and it doesn't open up all the pairs for some reason, it did it once but because the chart's said "Waiting for update" I closed them all down. However, after reading the last post page I found out that I just had to re-drag the charts from "Marketwatch" because of a inherit bug in Empty4.

However, now when I try to re-run the profile it wont open up all the charts, does anyone know why?

Thank you for a great strategy and great forum post's.

/Chris
Author:  Ingot54 [ Tue Jul 02, 2013 2:47 pm ]
Post subject:  Re: 10.4 A Complete System
jakuza wrote:Hi Everyone:
I have traded this system for a week and I like the result but I still have a lot to learn and I'm trying to press through all of the forum post's.

I do have a pressing question while I'm still catching up on my knowledge of this system. I ran the profile 104 and it doesn't open up all the pairs for some reason, it did it once but because the chart's said "Waiting for update" I closed them all down. However, after reading the last post page I found out that I just had to re-drag the charts from "Marketwatch" because of a inherit bug in Empty4.

However, now when I try to re-run the profile it wont open up all the charts, does anyone know why?

Thank you for a great strategy and great forum post's.

/Chris
It takes awhile.

If you have only one chart visible, try clicking on another of the charts on the bottom tool bar ... or double clicking one of them.
Other than that, try clicking on "Window/Tile vertically" and see if that helps
Author:  jakuza [ Tue Jul 02, 2013 3:14 pm ]
Post subject:  Re: 10.4 A Complete System
Ingot54 wrote:
jakuza wrote:Hi Everyone:
I have traded this system for a week and I like the result but I still have a lot to learn and I'm trying to press through all of the forum post's.

I do have a pressing question while I'm still catching up on my knowledge of this system. I ran the profile 104 and it doesn't open up all the pairs for some reason, it did it once but because the chart's said "Waiting for update" I closed them all down. However, after reading the last post page I found out that I just had to re-drag the charts from "Marketwatch" because of a inherit bug in Empty4.

However, now when I try to re-run the profile it wont open up all the charts, does anyone know why?

Thank you for a great strategy and great forum post's.

/Chris
It takes awhile.

If you have only one chart visible, try clicking on another of the charts on the bottom tool bar ... or double clicking one of them.
Other than that, try clicking on "Window/Tile vertically" and see if that helps
Thank you, unfortunately the only chart's that are open right now is the ones that I have opened up manually. I have tiled them vertically and then gone and re-selected the profile 104 again but it doesn't open up any more charts. I tried switching over to Normal and then back to 104 but it doesn't help.

I will try to re-copy the profile into the profiles directory and the restart Empty4 to see if that fixes it.

Thank you for all the help.

/Chris
Author:  jakuza [ Tue Jul 02, 2013 3:18 pm ]
Post subject:  Re: 10.4 A Complete System
jakuza wrote:
Ingot54 wrote:
jakuza wrote:Hi Everyone:
I have traded this system for a week and I like the result but I still have a lot to learn and I'm trying to press through all of the forum post's.

I do have a pressing question while I'm still catching up on my knowledge of this system. I ran the profile 104 and it doesn't open up all the pairs for some reason, it did it once but because the chart's said "Waiting for update" I closed them all down. However, after reading the last post page I found out that I just had to re-drag the charts from "Marketwatch" because of a inherit bug in Empty4.

However, now when I try to re-run the profile it wont open up all the charts, does anyone know why?

Thank you for a great strategy and great forum post's.

/Chris
It takes awhile.

If you have only one chart visible, try clicking on another of the charts on the bottom tool bar ... or double clicking one of them.
Other than that, try clicking on "Window/Tile vertically" and see if that helps
Thank you, unfortunately the only chart's that are open right now is the ones that I have opened up manually. I have tiled them vertically and then gone and re-selected the profile 104 again but it doesn't open up any more charts. I tried switching over to Normal and then back to 104 but it doesn't help.

I will try to re-copy the profile into the profiles directory and the restart Empty4 to see if that fixes it.

Thank you for all the help.

/Chris

Just wanted to let everyone know that, shutting down your Empty4 and re-copy the profile 104 directory into the profile directory did fix my issue, now all the pair's are opened up when I started Empty4 up again.

Thank you for all the support (quick fix) :)

/Chris
Author:  nanningbob [ Tue Jul 02, 2013 4:01 pm ]
Post subject:  Re: 10.4 A Complete System
cmeade2 wrote:Bob

What time zone are you living in? Even though you are on the east coast, I see that you are posting in the middle of the night.

cmeade2
I am in the Orlando Florida area, Longwood. My body clock is still not on Eastern time yet so i may be wandering around the house at any time.
Author:  cmeade2 [ Tue Jul 02, 2013 9:38 pm ]
Post subject:  Re: 10.4 A Complete System
I'm sure you are great and very interesting house guest!
nanningbob wrote:
cmeade2 wrote:Bob

What time zone are you living in? Even though you are on the east coast, I see that you are posting in the middle of the night.

cmeade2
I am in the Orlando Florida area, Longwood. My body clock is still not on Eastern time yet so i may be wandering around the house at any time.
All times are UTC Page 602 of 745

Powered by phpBB® Forum Software © phpBB Limited