stevehopwoodforex.com
https://www.stevehopwoodforex.com/phpBB3/
Print view

NeoTraders NB Indicator Lab
https://www.stevehopwoodforex.com/phpBB3/viewtopic.php?t=639		 Page 8 of 36
Author:  NeoTrader [ Wed Jun 27, 2012 11:46 pm ]
Post subject:  Re: NeoTraders NB Indicator Lab
monty wrote:Thank you for your hard work and your help, and sorry for late reply..
I'm using 102 Jem Basket-Main tpl on 20 4h charts,witch includes the NT TMA-CSS-SP v102.
It did used to freeze the platform,till I removed all NT TMA-CSS from all the charts that solved the problem.
Now I have install the Nt TMA-CSS with reduced max bar to 120,witch is a lot better than before,but it dose slows the platform still.
OK, may I ask what processor (type/?GHz ) and how much RAM you have?

This freeze effect should only take place when you start all charts/indicators at once and at the start of Empty4...just wait...after the initial freeze time it should work without problems.

I don't know if you know how the CSS-SP calculation works....for each chart/pair the TMA is calculated for all with this currency pair related pairs. This means the TMA of 13 different pairs is calculated for each chart/Pair and almost each tick. Multiply that with your 20 charts....that means that 260 TMA calculations are in place each tick and this is only one part of the calculation... ;)
Any decent computer shouldn't have any problems with this...if we could have another platform then Empty4....;)

I don't have much more optimization possibilities in Empty4 other then to program this as dll. And this will not happen... ;)

happy trading,

NeoTrader

-
Author:  monty [ Thu Jun 28, 2012 8:25 am ]
Post subject:  Re: NeoTraders NB Indicator Lab
NeoTrader wrote:
monty wrote:Thank you for your hard work and your help, and sorry for late reply..
I'm using 102 Jem Basket-Main tpl on 20 4h charts,witch includes the NT TMA-CSS-SP v102.
It did used to freeze the platform,till I removed all NT TMA-CSS from all the charts that solved the problem.
Now I have install the Nt TMA-CSS with reduced max bar to 120,witch is a lot better than before,but it dose slows the platform still.
OK, may I ask what processor (type/?GHz ) and how much RAM you have?

This freeze effect should only take place when you start all charts/indicators at once and at the start of Empty4...just wait...after the initial freeze time it should work without problems.

I don't know if you know how the CSS-SP calculation works....for each chart/pair the TMA is calculated for all with this currency pair related pairs. This means the TMA of 13 different pairs is calculated for each chart/Pair and almost each tick. Multiply that with your 20 charts....that means that 260 TMA calculations are in place each tick and this is only one part of the calculation... ;)
Any decent computer shouldn't have any problems with this...if we could have another platform then Empty4....;)

I don't have much more optimization possibilities in Empty4 other then to program this as dll. And this will not happen... ;)

happy trading,

NeoTrader

-
Thank you for your reply and the information.

I'm runnig this fantastic indicator on crap Empty4,on a laptop with 2.ghz due intel cpu,and 4.00gb ram,32bit operatin system,window 7.
The CSS indicator help me a lot with staying in trade and exit.
I'm going to reduce the number of charts open,and only open them if I need to watch them in trading.

Thank you again.

Monty
Author:  slowkey [ Thu Jun 28, 2012 9:12 am ]
Post subject:  Hi NeoTrader
Just a word to say I have readjusted the setting on the indicator in True TMA mode. I am hiding the Base line so that just the Diff and the Cross slopes are visible. I set the ATR to 40 and the period to 12. I think I have come really close to a really nice setup. JeMook suggested moving the thread to the Manual trading section and I agreed so that is where it is to be found. I appreciated your comments and any future suggestions. It is an excellent indicator. As soon as the new week starts I hope to be adding snap shots of live trades to the thread.
Author:  NeoTrader [ Thu Jun 28, 2012 10:16 am ]
Post subject:  Re: Hi NeoTrader
hi slowkey,
slowkey wrote:Just a word to say I have readjusted the setting on the indicator in True TMA mode. I am hiding the Base line so that just the Diff and the Cross slopes are visible. I set the ATR to 40 and the period to 12. I think I have come really close to a really nice setup. JeMook suggested moving the thread to the Manual trading section and I agreed so that is where it is to be found. I appreciated your comments and any future suggestions. It is an excellent indicator. As soon as the new week starts I hope to be adding snap shots of live trades to the thread.
I am following your thread and I saw already that you found the Parameters for atrPeriod and tmaPeriod and played with them...nice move..;)
Keep up the good work I'm really interested in your setup how this works out in the lower timeframes and in daytrading/scalping.

happy trading,

NeoTrader

-
Author:  dextroze [ Fri Jun 29, 2012 8:17 am ]
Post subject:  Re: NeoTraders NB Indicator Lab
Nice job on the CSS stuff. Really appreciate it. Just wondering since it calculates all pair at the beginning ... Is it possible to

1. Have a dashboard that shows say EUR crossing USD or any currency vs any currency at D1 or any time frame.

As i have seen using ur indicator at each crossing shows the trend change be it at H1 or D1. If u can code this its gonna be superb. Thank you.
Author:  NeoTrader [ Fri Jun 29, 2012 8:41 am ]
Post subject:  Re: NeoTraders NB Indicator Lab
hi dextroze,
dextroze wrote:1. Have a dashboard that shows say EUR crossing USD or any currency vs any currency at D1 or any time frame.
As i have seen using ur indicator at each crossing shows the trend change be it at H1 or D1. If u can code this its gonna be superb. Thank you.
I don't know if I understand you correct but did you look at Baludas Indicators ? His Currency Slope Strength shows all pairs in one indicator and also their crossing...Timeframe is also selectable...

If this is not what you looking for please be more specific at what you want to have and what you think it would/should accomplish.

happy trading,

NeoTrader

-
Author:  dextroze [ Fri Jun 29, 2012 8:44 am ]
Post subject:  Re: NeoTraders NB Indicator Lab
Shall I say "crossover" like MA crossover and alarm goes off ... make it like base and cross , crossover and have an alert of some sort ... It would show u the reversal of trends.
Author:  NeoTrader [ Fri Jun 29, 2012 9:02 am ]
Post subject:  Re: NeoTraders NB Indicator Lab
hi dextroze
dextroze wrote:Shall I say "crossover" like MA crossover and alarm goes off ... make it like base and cross , crossover and have an alert of some sort ... It would show u the reversal of trends.
I already have diffAlerts implemented that send alerts when the Diff slope crosses a predefined level.

But you want an alert if both currency slopes cross each other...correct?...this is also possible if you set the Diff Alert only to 0 Level...;)

But my indicator is only for a single pair....for multiple pairs you need to add this indicator to the pairs you are observing.

Thanks for you input.

happy trading,

NeoTrader

-
Author:  dextroze [ Fri Jun 29, 2012 9:10 am ]
Post subject:  Re: NeoTraders NB Indicator Lab
Cool .. I'll give it a try
Author:  MacLeod22 [ Sat Jun 30, 2012 9:29 am ]
Post subject:  Re: NeoTraders NB Indicator Lab
Neo, thanks for this awesome indicator. I'm sure it is something simple I have overlooked, but when I load NT TMA-CSS and set autosymbols to "true" the lines do not appear, but when I set it to false they do. I guess the scope of swaps indicluded affect the overall strength/weakness plotted, so prefer to select to true. What am I doing wrong?
All times are UTC Page 8 of 36

Powered by phpBB® Forum Software © phpBB Limited