Merry Christmas to all traders here!!
| stevehopwoodforex.com https://www.stevehopwoodforex.com/phpBB3/ Print view |
|
| HGI https://www.stevehopwoodforex.com/phpBB3/viewtopic.php?t=3964 |
Page 73 of 295 |
| Author: | darshanag [ Sun Dec 21, 2014 12:12 pm ] |
| Post subject: | HGI |
A heart felt thank you from a genuinely grateful newbie.. A special appreciation goes out to Bob, Tommaso, Al, Pedro, Steve and many others who took time to clarify all the doubts I had thus far and sometimes putting up with my not so bright questions !!!! You guys truly stand out and clearly walk the talk when it comes to displaying unbelievable selflessness and commitment to help those of us who are still finding our feet in this game. I'm yet to fully test the HGI / Hurst system (as I have been having few 'technical' issues) and judging by those who have mastered it, it def sounds like THE system and the ONLY one you need to be successful. Here's 2015 is going to be the year to prove it !! All the best and Merry Christmas to all of you here !!! Darshana |
|
| Author: | carolco [ Sun Dec 21, 2014 1:49 pm ] |
| Post subject: | HGI |
Merry Christmas to all traders here!! |
|
| Author: | nanningbob [ Sun Dec 21, 2014 2:17 pm ] |
| Post subject: | HGI |
Thank you for all your notes and comments. We do this because no man is a rock and no man is an island. We all need others to survive and succeed in this world. I probably would have dropped out of Forex long ago if it wasnt for others taking some ideas I had and massively improving them. Excited about a better year of trading. |
|
| Author: | nanningbob [ Sun Dec 21, 2014 2:20 pm ] |
| Post subject: | HGI |
I seem to be having a problem with my new computer. I am getting Wifi started but later I will lose connection and then when I run the troubleshooter I will get this message 'doesnt have a valic IP configuration' not fixed. It seems if I plug in a thumb drive or have another instrument, like a phone using a different wifi connection it gives me this problem. This is not an absolute idea of the problem but my best guess. Or just a bad wifi unit. Any Ideas? |
|
| Author: | milanese [ Sun Dec 21, 2014 2:46 pm ] |
| Post subject: | HGI |
It could be a network adapter problem, try to install the latest driver for your network adapter.. Cheers  Tommaso |
|
| Author: | Zingers [ Sun Dec 21, 2014 3:01 pm ] |
| Post subject: | HGI |
Hi Nanningbob I am not familiar with your personal Ethernet setup and the following may not be practicable for you; but if it is and you are close to your home "router," or can run wire within your home, you should *always* use an Ethernet cable when possible. WiFi is very susceptible to interference, and even in "ideal" conditions, dozens to thousands of transmission and receive errors occur every hour, and this rate will increase exponentially as you add more devices and if other access points are added nearby. WiFi can be interrupted by microwave ovens, cordless phones, and other devices that operate near the 2.4Ghz (or 5Ghz) range. From a security standpoint, by using an Ethernet cable, no one without direct access to the wires in your home can snoop on your traffic. If your router setup is within cable reach to your computer plug in as many devices as you can to your four or more Ethernet ports, not only will those devices run faster, but your wireless network will be less congested for your remaining devices Hope this helps your situation. Nanningbob, and your Contributors/Coders - May your Christmas be filled with lots of happiness, peace and love... ooh and lots of presents. Zingers |
|
| Author: | ahad [ Sun Dec 21, 2014 3:55 pm ] |
| Post subject: | HGI |
Hi Bob, Agree with Zingers, cable is always more consistent and reliable than WIFI. I use it where feasible, especially for workstations. I use a pair of these: http://www.tp-link.com/lk/products/deta ... l=TL-PA211 to run a "cable" ethernet link through the power network in my house. Once they are paired up they behave well in my experience. Other thing to try: Set your workstation IP to static, don't use DHCP. Check for VPN tunnelling software on your PC; these programs can do funny things to the software configs of network adaptors (it's unlikely this is your issue, it's a new build right?) I assume any other device on you network is not hitting this issue? If they are it's always worth restarting your network equipment. Happy Christmas to you and all the other hardworking contributors to this forum. I've learned more from reading here in the last few months than a year of reading textbooks. Ahad. |
|
| Author: | ahad [ Sun Dec 21, 2014 4:00 pm ] |
| Post subject: | HGI |
Oh yes also. If you prefer to use WIFI try disabling any other network adaptors via the Control Panel when you're troubleshooting the problem. Taking as many factors out of the process as possible will help to isolate the issue. |
|
| Author: | Pipstubborn [ Sun Dec 21, 2014 4:19 pm ] |
| Post subject: | HGI |
Strangely enough has been happening the same here in Mexico. Last week I lost several times WIFI internet conection and one of the lights of the router is flashing, which shouldn't. What I do is to shut down the pc, unplug the router from the wall and reconect again 5 min later. Weird uh Merry Chirstmas Bob and all |
|
| Author: | rosst [ Sun Dec 21, 2014 4:34 pm ] |
| Post subject: | HGI |
Maybe we need a thread for computer help! My computer recently crashed and I am having to re-install everything  Empty4 is a pain now because you can no longer just copy over the backed up Empty4 folder. I have been working on this for a week now! |
|
| All times are UTC | Page 73 of 295 |
|
Powered by phpBB® Forum Software © phpBB Limited |
|