stevehopwoodforex.com
https://www.stevehopwoodforex.com/phpBB3/
Print view

Nanningbob 10.1 The EA is here
https://www.stevehopwoodforex.com/phpBB3/viewtopic.php?t=128		 Page 10 of 25
Author:  squalou [ Tue Dec 13, 2011 5:51 pm ]
Post subject: 
squalou wrote: If we break the 1.3145 low established on Oct 4, we'll have to set DaysBack to.... 400(!!) to uncover D1 levels further south... !!
Next stop at 1.3055, then 1.2970.

Sq

DING DING !

Massive EU drop down to 1.3058...

EU now taking a breathe...
40p bounce off 3058,
and now pointing down again...
will complete the "hook" back to retest 3058 level, and then .....

We are now looking at the Low of the Year back in .... January : ==> 1.2970 ?

Or a massive bounce up to 3164, which has been a very good Support earlier today to finally break and produce this massive drop;
3164 would now logically play as a strong Resistance.
I would probably ignore 3146, as it was ignored today...
2011-12-13_184928.gif
Ladies and Gentlemen, please fasten your seat belts and get ready for the next RollerCoaster tour !

I love S/Rs !

:mrgreen:


As you can see, there is a lot to develop with JUST S/R LEVELS ALONE.
(almost...)


SQ
Author:  squalou [ Tue Dec 13, 2011 5:57 pm ]
Post subject:  Re: Nanningbob 10.1 The EA is here
SteveHopwood wrote:Latest update in post 1.

I have stopped the pending price line moving. The only time it is deleted is at the start of the D1 candle.

:D
thanks Steve, i'll try that one.

Not sure this solves it though, as i had TradingTimeFrame set to 1440 already (ootb), but didn't help...
We'll see how it goes.

I am experimenting the change i had suggesting, using S1 or R1 whichever suits best;
works fine for entries,;
But now fighting to setup the TP and SL correctly......

Sq
Author:  squalou [ Tue Dec 13, 2011 6:02 pm ]
Post subject:  Re: Nanningbob 10.1 The EA is here
I also found a reason why it wouldn't enter some trades:

UseZeljko = true;
OnlyTradeCurrencyTwice = true;
(ootb settings)

I had TIB running on multiple pairs and eventually trades "interferences" due to Zeljko filter...

This one was quite hard to hunt down......

I set both to false.

I think this should help.

Sq
Author:  SteveHopwood [ Tue Dec 13, 2011 7:51 pm ]
Post subject:  Re: Nanningbob 10.1 The EA is here
squalou wrote:I also found a reason why it wouldn't enter some trades:

UseZeljko = true;
OnlyTradeCurrencyTwice = true;
(ootb settings)

I had TIB running on multiple pairs and eventually trades "interferences" due to Zeljko filter...

This one was quite hard to hunt down......

I set both to false.

I think this should help.

Sq
Ah well, you will know in the future; these filters ship with nearly all of my bots.

I missed the EU tank on demo because I forgot to load TIB onto the chart. Hey-ho; can't remember everything. :lol:

:D
Author:  SteveHopwood [ Tue Dec 13, 2011 8:04 pm ]
Post subject:  Re: Nanningbob 10.1 The EA is here
Hehe. And now you have reminded me about those filters, TIB is trading like a trollop. :lol:
Author:  SteveHopwood [ Tue Dec 13, 2011 10:41 pm ]
Post subject:  Re: Nanningbob 10.1 The EA is here
I have been thinking about this. The UseZeljko and OnlyTradeCurrencyTwice filters were intended to help us avoid overtrading when using Bob's Recovery.

!-.1 is an, 'I am right or I am out' system, so they are not needed here. In the absence of mass howls of protest, I shall remove them tomorrow.

I shall leave the margin filters (ForexKiwi/Scoobs) for the benefit of those who want to trade larger lot sizes.

:D
Author:  gaheitman [ Tue Dec 13, 2011 10:47 pm ]
Post subject:  Re: Nanningbob 10.1 The EA is here
SteveHopwood wrote:I have been thinking about this. The UseZeljko and OnlyTradeCurrencyTwice filters were intended to help us avoid overtrading when using Bob's Recovery.

!-.1 is an, 'I am right or I am out' system, so they are not needed here. In the absence of mass howls of protest, I shall remove them tomorrow.

I shall leave the margin filters (ForexKiwi/Scoobs) for the benefit of those who want to trade larger lot sizes.

:D
It seems somehow wrong to actual remove code from your bots. I'm not using any of those right now (and don't see when I would), but couldn't bring myself to delete them. :D
Author:  SteveHopwood [ Tue Dec 13, 2011 11:17 pm ]
Post subject:  Re: Nanningbob 10.1 The EA is here
gaheitman wrote:
SteveHopwood wrote:I have been thinking about this. The UseZeljko and OnlyTradeCurrencyTwice filters were intended to help us avoid overtrading when using Bob's Recovery.

!-.1 is an, 'I am right or I am out' system, so they are not needed here. In the absence of mass howls of protest, I shall remove them tomorrow.

I shall leave the margin filters (ForexKiwi/Scoobs) for the benefit of those who want to trade larger lot sizes.

:D
It seems somehow wrong to actual remove code from your bots. I'm not using any of those right now (and don't see when I would), but couldn't bring myself to delete them. :D
Oh, I hardy ever actually remove anything. I usually merely comment it out just in case.

My experience is this: the instant I remove code, somebody comes up with a really cogent reason why it should remain. :lol:

That is why 95% of my code is redundant. :lol:

:D
Author:  blazko [ Wed Dec 14, 2011 8:51 am ]
Post subject:  Re: Nanningbob 10.1 The EA is here
Anyone else having these errors (Cowboy IBFX us mini)?

Image

im using these settings:

Code: Select all

gen=----General inputs----
Lot=0.01000000
RiskPercent=0.50000000
StopTrading=0
TradeLong=1
TradeShort=1
MagicNumber=0
TradeComment=
CriminalIsECN=1
MaxSpread=120.00000000
sli=----Stop loss inputs----
StopLoss=0
UseRed=1
UseOppositeD1SR2=0
FailedStopLossPips=40
tpi=----Take profit inputs----
TakeProfit=0
UseD1SR2=1
FailedTakeProfitPips=40
hts=----Stealth stop loss and take profit inputs----
HiddenPips=2
aes=----Additional exit strategies----
CloseOnTrendChange=1
sri=----Support and resistance inputs----
UseD1=1
ppi=----Pending trade inputs----
BufferPips=5
BuyLineColour=32768
SellLineColour=255
TradingTimeFrame=1440
bf=----Trading balance filters----
UseZeljko=1
OnlyTradeCurrencyTwice=1
nbmas=NB V10
FastNbTdTF=1440
FastNbTdPeriod=2
FastNbTdShift=1
nbmame=Method: 0=sma; 1=ema; 2=smma;  3=lwma
FastNbTdMethod=2
nbmaap=Applied price: 0=Close; 1=Open; 2=High
nbmaap1=3=Low; 4=Median; 5=Typical; 6=Weighted
FastNbTdAppliedPrice=4
SlowNbTdTF=1440
SlowNbTdPeriod=8
SlowNbTdMethod=2
SlowNbTdShift=2
SlowNbTdAppliedPrice=4
aal=----All averages inputs----
UseAA=0
TimeFrame=1440
Price=0
MA_Period=50
MA_Shift=0
MA_Method=0
CandleShift=0
hm=----Hanover module----
UseHanover=0
ctf=Time frames
TimeFrames=D1
SlopeConfirmationCandles=0
StrongThreshold=0
WeakThreshold=0
hof=Hanover output file
OutputFile=Output---Recent Strength.CSV
NumPoints=15
cbi=----Central Bank Intervention module----
UseCBI=0
TableSize=20
Threshold=30
CloseOnCBI=0
HedgeOnCBI=1
CbiHedgeLotMultiplier=4.00000000
TradeOnCBI=1
TradeOnCbiTP=200
TradeOnCbiSL=50
amc=----Available Margin checks----
sco=Scoobs
UseScoobsMarginCheck=0
fk=ForexKiwi
UseForexKiwi=1
FkMinimumMarginPercent=1500
tt=----Trading hours----
Trade_Hours=Set Morning & Evening Hours
Trade_Hoursi=Use 24 hour, local time clock
Trade_Hours_M=Morning Hours 0-12
start_hourm=0
end_hourm=12
Trade_Hours_E=Evening Hours 12-24
start_houre=12
end_houre=24
pts=----Swap filter----
CadPairsPositiveOnly=0
AudPairsPositiveOnly=0
NzdPairsPositiveOnly=0
tmm=----Trade management module----
BE=Break even settings
BreakEven=1
BreakEvenPips=20
BreakEvenProfit=5
cts=----Candlestick trailing stop----
UseCandlestickTrailingStop=0
CstTimeFrame=0
CstTrailCandles=1
JSL=Jumping stop loss settings
JumpingStop=1
JumpingStopPips=20
TSL=Trailing stop loss settings
TrailingStop=0
TrailingStopPips=20
mis=----Odds and ends----
ShowManagementAlerts=1
DisplayGapSize=30
Author:  SteveHopwood [ Wed Dec 14, 2011 9:29 am ]
Post subject:  Re: Nanningbob 10.1 The EA is here
blazko wrote:Anyone else having these errors (Cowboy IBFX us mini)?

Image

im using these settings:

Code: Select all

gen=----General inputs----
Lot=0.01000000
RiskPercent=0.50000000
StopTrading=0
TradeLong=1
TradeShort=1
MagicNumber=0
TradeComment=
CriminalIsECN=1
MaxSpread=120.00000000
sli=----Stop loss inputs----
StopLoss=0
UseRed=1
UseOppositeD1SR2=0
FailedStopLossPips=40
tpi=----Take profit inputs----
TakeProfit=0
UseD1SR2=1
FailedTakeProfitPips=40
hts=----Stealth stop loss and take profit inputs----
HiddenPips=2
aes=----Additional exit strategies----
CloseOnTrendChange=1
sri=----Support and resistance inputs----
UseD1=1
ppi=----Pending trade inputs----
BufferPips=5
BuyLineColour=32768
SellLineColour=255
TradingTimeFrame=1440
bf=----Trading balance filters----
UseZeljko=1
OnlyTradeCurrencyTwice=1
nbmas=NB V10
FastNbTdTF=1440
FastNbTdPeriod=2
FastNbTdShift=1
nbmame=Method: 0=sma; 1=ema; 2=smma;  3=lwma
FastNbTdMethod=2
nbmaap=Applied price: 0=Close; 1=Open; 2=High
nbmaap1=3=Low; 4=Median; 5=Typical; 6=Weighted
FastNbTdAppliedPrice=4
SlowNbTdTF=1440
SlowNbTdPeriod=8
SlowNbTdMethod=2
SlowNbTdShift=2
SlowNbTdAppliedPrice=4
aal=----All averages inputs----
UseAA=0
TimeFrame=1440
Price=0
MA_Period=50
MA_Shift=0
MA_Method=0
CandleShift=0
hm=----Hanover module----
UseHanover=0
ctf=Time frames
TimeFrames=D1
SlopeConfirmationCandles=0
StrongThreshold=0
WeakThreshold=0
hof=Hanover output file
OutputFile=Output---Recent Strength.CSV
NumPoints=15
cbi=----Central Bank Intervention module----
UseCBI=0
TableSize=20
Threshold=30
CloseOnCBI=0
HedgeOnCBI=1
CbiHedgeLotMultiplier=4.00000000
TradeOnCBI=1
TradeOnCbiTP=200
TradeOnCbiSL=50
amc=----Available Margin checks----
sco=Scoobs
UseScoobsMarginCheck=0
fk=ForexKiwi
UseForexKiwi=1
FkMinimumMarginPercent=1500
tt=----Trading hours----
Trade_Hours=Set Morning & Evening Hours
Trade_Hoursi=Use 24 hour, local time clock
Trade_Hours_M=Morning Hours 0-12
start_hourm=0
end_hourm=12
Trade_Hours_E=Evening Hours 12-24
start_houre=12
end_houre=24
pts=----Swap filter----
CadPairsPositiveOnly=0
AudPairsPositiveOnly=0
NzdPairsPositiveOnly=0
tmm=----Trade management module----
BE=Break even settings
BreakEven=1
BreakEvenPips=20
BreakEvenProfit=5
cts=----Candlestick trailing stop----
UseCandlestickTrailingStop=0
CstTimeFrame=0
CstTrailCandles=1
JSL=Jumping stop loss settings
JumpingStop=1
JumpingStopPips=20
TSL=Trailing stop loss settings
TrailingStop=0
TrailingStopPips=20
mis=----Odds and ends----
ShowManagementAlerts=1
DisplayGapSize=30
Yep. Not a clue what is causing them.

:D
All times are UTC Page 10 of 25

Powered by phpBB® Forum Software © phpBB Limited