stevehopwoodforex.com
https://www.stevehopwoodforex.com/phpBB3/
Print view

Gann Ribbon 10.7 System
https://www.stevehopwoodforex.com/phpBB3/viewtopic.php?t=3524		 Page 10 of 37
Author:  slowkey [ Fri Apr 18, 2014 7:28 pm ]
Post subject:  Gann Ribbon System
eevra » Fri Apr 18, 2014 10:15 am wrote:thanks slowkey for the videos
slowkey wrote:th
Thanks eevra

Doug
Author:  cosmo [ Fri Apr 18, 2014 11:43 pm ]
Post subject:  Gann Ribbon System
Thank you so much for putting together your video, seeing that explained a lot more about the ribbons than reading about it.
I hope you return to good health soon.
Thanks for your generous contribution.
Author:  slowkey [ Sat Apr 19, 2014 12:17 am ]
Post subject:  Gann Ribbon System
cosmo » Fri Apr 18, 2014 7:43 pm wrote:Thank you so much for putting together your video, seeing that explained a lot more about the ribbons than reading about it.
I hope you return to good health soon.
Thanks for your generous contribution.
Thanks cosmo

Doug
Author:  fxozgirl [ Sat Apr 19, 2014 1:53 am ]
Post subject:  Gann Ribbon System
Sorry Doug, I'm keen to take a look at your system but trying not to look like an idiot here...I also cannot see the ribbons.
I have tried installing .mq4 files only (new install), then tried a 2nd new install with .ex4 as mentioned a few pages back, still no ribbons.

I am running a Global Prime demo build 625 and yes indicators were loaded through 'open data folder'.

If you have any tips, that would be great.

Cheers
Shelley
Author:  fok [ Sat Apr 19, 2014 3:34 am ]
Post subject:  Gann Ribbon System
Not sure, but I had the same problem (GP).

Then I deleted kino_T3MA ribbon filled_v6.mq4 and .ex4 file from my Empty4 indicators folder (path datafolder) and copied only the kino_T3MA ribbon filled_v6.mq4 and compiled this indi. After that I see all the ribbons ...

Thank you so much, Doug. I never saw such beautiful charts before and hope they will help to make profitable trade decisions, I will test it over the weekend.

fok

:hi:
Author:  slowkey [ Sat Apr 19, 2014 4:29 am ]
Post subject:  Gann Ribbon System
fxozgirl » Fri Apr 18, 2014 9:53 pm wrote:Sorry Doug, I'm keen to take a look at your system but trying not to look like an idiot here...I also cannot see the ribbons.
I have tried installing .mq4 files only (new install), then tried a 2nd new install with .ex4 as mentioned a few pages back, still no ribbons.

I am running a Global Prime demo build 625 and yes indicators were loaded through 'open data folder'.

If you have any tips, that would be great.

Cheers
Shelley
I reproduced your problem by trying to compile the indicators in 625.
Did you by any chance compile the indicators in 625?
It would seem that the compiler in 625 breaks them.
They compile ok in 625 with no errors but you do not see them. I fixed my problem by just copying the files below into the indicator directory and back came my ribbons when I restarted. I do not think the below ribbons were compiled in 625 and that 625 just moved them to the new directory structure on install. If this works for you Shelly let me know. Compiling in 625 breaks the ribbons it seems. See if it fixes your problem. If not I will get a Demo of Global Prime and go from there.

The keno ribbon file calls the T3ma to work.
Author:  slowkey [ Sat Apr 19, 2014 4:46 am ]
Post subject:  Gann Ribbon System
fok » Fri Apr 18, 2014 11:34 pm wrote:Not sure, but I had the same problem (GP).

Then I deleted kino_T3MA ribbon filled_v6.mq4 and .ex4 file from my Empty4 indicators folder (path datafolder) and copied only the kino_T3MA ribbon filled_v6.mq4 and compiled this indi. After that I see all the ribbons ...

Thank you so much, Doug. I never saw such beautiful charts before and hope they will help to make profitable trade decisions, I will test it over the weekend.

fok

:hi:
Yes this problem is a bit of Mystery to me and must have something to do with 625. 625 is going to take the source code and run it compiled yet it does not like to get compiled by me. Weird.

Thanks for participating,
Doug
Author:  slowkey [ Sat Apr 19, 2014 4:56 am ]
Post subject:  Gann Ribbon System
Yes every time I compile in 625 it breaks the ribbons. So If any body else has this problem I will be putting the zip file in post one. If any coder out there have a clue why this is happening let me know.

Doug
Author:  fxozgirl [ Sat Apr 19, 2014 10:38 am ]
Post subject:  Gann Ribbon System
slowkey » Sat Apr 19, 2014 2:29 pm wrote:
fxozgirl » Fri Apr 18, 2014 9:53 pm wrote:Sorry Doug, I'm keen to take a look at your system but trying not to look like an idiot here...I also cannot see the ribbons.
I have tried installing .mq4 files only (new install), then tried a 2nd new install with .ex4 as mentioned a few pages back, still no ribbons.

I am running a Global Prime demo build 625 and yes indicators were loaded through 'open data folder'.

If you have any tips, that would be great.

Cheers
Shelley
I reproduced your problem by trying to compile the indicators in 625.
Did you by any chance compile the indicators in 625?
It would seem that the compiler in 625 breaks them.
They compile ok in 625 with no errors but you do not see them. I fixed my problem by just copying the files below into the indicator directory and back came my ribbons when I restarted. I do not think the below ribbons were compiled in 625 and that 625 just moved them to the new directory structure on install. If this works for you Shelly let me know. Compiling in 625 breaks the ribbons it seems. See if it fixes your problem. If not I will get a Demo of Global Prime and go from there.

The keno ribbon file calls the T3ma to work.

Yeah! Thanks Doug..it worked :clap: thanks Fok for your help too!
BTW, I had previously compiled the indicators in 625!

For anyone else having this problem, I saved the 2 indicators in the MQ4/Indicators, opened the platform, attached the template (no ribbons), closed the platform, re-opened the platform and voila...ribbons are there!

Cheers

Shelley
Author:  jago25 [ Sat Apr 19, 2014 12:30 pm ]
Post subject:  Gann Ribbon System
I can confirm that compile on 625 for T3MA.mq4 fails for me too. Fortunately I had a .ex4 precompiled leftover in another Empty4 folder that still works so I'm using this. The resulting .ex4 filesizes are very different. For anyone's reference:

Code: Select all

Empty4-workingVSnonWorking]$ ls -lh
total 28K
-rw-rw-r--. 1 j j 3.1K Mar 15 05:28 T3MA-MAYBEnotWorking.mq4
-rw-r--r--. 1 j j 3.1K Feb 27 21:21 T3MA-maybeWorking.mq4
-rw-rw-r--. 1 j j 8.1K Apr 16 20:58 T3MA-NOTworking.ex4
-rw-r--r--. 1 j j 4.9K Feb 27 21:33 T3MA-works.ex4
[j@localhost Empty4-workingVSnonWorking]$ md5sum *
97213c3c5d5db0f8274d412916cfa4bd  T3MA-MAYBEnotWorking.mq4
97213c3c5d5db0f8274d412916cfa4bd  T3MA-maybeWorking.mq4
ccd2021d81f927dbe8f82f4e29bc9d9b  T3MA-NOTworking.ex4
1fe072fd266e4a7c75b6e20d4b130c96  T3MA-works.ex4
I thought I'd apply the ribbon to futures and bitcoin markets to see what happens. I have some screenshots to share but it seems offtopic here so I will refrain from posting. I used TradeSimv2 to get the visual shots and this works through Crapergy Tester - so maybe I have to find another way to visually backtest manual systems before sharing? Also, I won't post the working T4MA-works.ex4 file as maybe that might annoy someone too so if you need it feel free to PM.

Hope this helps.

edit: p.s. Forgot to say thanks for that video :P It's really easier to understand to hear it this way and it was great to watch. Wish you the best of health. I had a cold last week too... took a bunch of algae pills (for omega3) and vitamin c tablets... even got a massage and forced myself to go for a swim in the sea. Lost it in a couple of days when people around me seem to have it for a week. Could be coincidence or placebo of course and I apologise for unrequested advise but this is the 3rd time the vitC & omega3 has worked for me. Could be worth a shot.
All times are UTC Page 10 of 37

Powered by phpBB® Forum Software © phpBB Limited