stevehopwoodforex.com
https://www.stevehopwoodforex.com/phpBB3/
Print view

240 MA BUY.ABOVE_SELL.BELOW
https://www.stevehopwoodforex.com/phpBB3/viewtopic.php?t=3871		 Page 10 of 24
Author:  Gertje [ Fri Oct 17, 2014 1:18 pm ]
Post subject:  240 MA BUY.ABOVE_SELL.BELOW
Bob,

You created a monster!
It's wiggeling it's tail on the H1 with Steve's autotrader.
http://www.stevehopwoodforex.com/phpBB3 ... f=5&t=3882

Thank you for coming up with this indi!

:!!:
Author:  nanningbob [ Fri Oct 17, 2014 3:03 pm ]
Post subject:  240 MA BUY.ABOVE_SELL.BELOW
Eamonn » Wed Oct 15, 2014 12:01 am wrote:Bob,

I think you have excelled this time, what a fantastic indicator especially on the higher time frames.

just a quick one I know that the indicator is based on the 4 hr 240 ma , is there any way we could make this a a user variable, ie I'm looking at the 750 ma on the 4 hr

Cheers and thanks again for your great work.

Eamonn.
I hard coded the 750 into the indi so you can test it out.
Author:  Eamonn [ Fri Oct 17, 2014 5:49 pm ]
Post subject:  240 MA BUY.ABOVE_SELL.BELOW
Cheers Bob,



your a star !!!!
Author:  cozybooks [ Sun Oct 19, 2014 3:52 am ]
Post subject:  240 MA BUY.ABOVE_SELL.BELOW
Bob, you mentioned in an earlier post not to try the CT trades in a strong trend. I've attached a GBPNZD 4-hour chart from early September which shows this exact issue, first giving only buy signals during a strong down trend, then only sell signals during a strong up trend (although technically the first two sell signals in the move up were below the 240 line).

If we use the initial CT signal as a take profit, could we then use SL the arrow sets for the CT trade as a valid re-entry point to continue trading with the trend? Or would you always switch to a lower time frame instead to look for a re-entry point? I'm thinking specifically of cases like this in which the trend is too strong to generate a new sell signal on the down trend or a new buy signal on the up trend. For example, the second CT signal on the move down on September 5th had a value of 1.9651 on my chart. If I set a pending trade to sell below 1.9651 in that case, it would have scooped up a bunch of extra pips without my having to switch to a lower time frame and be around to wait for a signal.

Thanks for a great system! :cheer:
Author:  nanningbob [ Sun Oct 19, 2014 1:53 pm ]
Post subject:  240 MA BUY.ABOVE_SELL.BELOW
cozybooks » Sun Oct 19, 2014 11:52 am wrote:Bob, you mentioned in an earlier post not to try the CT trades in a strong trend. I've attached a GBPNZD 4-hour chart from early September which shows this exact issue, first giving only buy signals during a strong down trend, then only sell signals during a strong up trend (although technically the first two sell signals in the move up were below the 240 line).

If we use the initial CT signal as a take profit, could we then use SL the arrow sets for the CT trade as a valid re-entry point to continue trading with the trend? Or would you always switch to a lower time frame instead to look for a re-entry point? I'm thinking specifically of cases like this in which the trend is too strong to generate a new sell signal on the down trend or a new buy signal on the up trend. For example, the second CT signal on the move down on September 5th had a value of 1.9651 on my chart. If I set a pending trade to sell below 1.9651 in that case, it would have scooped up a bunch of extra pips without my having to switch to a lower time frame and be around to wait for a signal.

Thanks for a great system! :cheer:
That is not a strong trend. This dipped below the 240 line for a week or two and then it moved above the 240 line. So that is just normal up and down movement.

Here is the eur/usd DT that ran for over 3 months so far. This is a strong DT.
Author:  nanningbob [ Mon Oct 20, 2014 7:32 am ]
Post subject:  240 MA BUY.ABOVE_SELL.BELOW
Page 1 Post 1 has V.8 Following changes were made:

1. Both indis were combined into one with T/F for trend or CT trades
2. Email alerts were added
3. Phone alerts were added
4. T/F was added to turn alerts off.

ShowCounterTrend = true; //Turn to False if you only want trend trades
SendAlerts = true; // Sends noise alerts
PopAlerts = true;// Sends screen alerts
PushAlerts = true;// Sends alerts to phone
EmailAlerts = true;//Sends alerts by email

Also we put a time stamp into the code. The indi will quit on Jan.1 2015. I am attempting to protect this indi from pirates who would sell the idea. There are 4 people who have the ability to go into the indi and change the date so it is not exclusive to me. Maybe at some point it wont matter but right now I wish to protect the idea. I hope you understand that I wish to keep the indi free to anyone that wants to use it but they must come here for their updates.
Author:  nicolkoekoek [ Mon Oct 20, 2014 9:40 am ]
Post subject:  240 MA BUY.ABOVE_SELL.BELOW
THANKS Bob for this great system and the update! I love it!

Could I put in one more request regarding the last update?: Is it possible to specify the "to use" Alert Wav file name in the indi?

So it could be changed easy to a nice "Bird.wav" or so, instead of only one standard alert wav for all alerts from the used CrapMT platform. Wouldn't it be nice to have different alert sounds for all the different signals (T_Buy or CT_Buy etc. )!

Thanks! Nicolaas
Author:  nanningbob [ Mon Oct 20, 2014 10:22 am ]
Post subject:  240 MA BUY.ABOVE_SELL.BELOW
I accidentally posted the wrong folder on Page 1. I have the right one now.
Author:  art [ Mon Oct 20, 2014 11:35 am ]
Post subject:  240 MA BUY.ABOVE_SELL.BELOW
Great stuff bob and Steve on my way to airport so can't join in the fun this week, hope all goes well and many pips to all
Author:  nanningbob [ Mon Oct 20, 2014 1:59 pm ]
Post subject:  240 MA BUY.ABOVE_SELL.BELOW
nicolkoekoek » Mon Oct 20, 2014 5:40 pm wrote:THANKS Bob for this great system and the update! I love it!

Could I put in one more request regarding the last update?: Is it possible to specify the "to use" Alert Wav file name in the indi?

So it could be changed easy to a nice "Bird.wav" or so, instead of only one standard alert wav for all alerts from the used CrapMT platform. Wouldn't it be nice to have different alert sounds for all the different signals (T_Buy or CT_Buy etc. )!

Thanks! Nicolaas
You can change the sounds in Empty4. Go to tools, options, events, make sure box is checked go to alerts and double click on the sound wave. You then can choose any sound wave in your computer. I once had it play the Beach Boy song Good Vibrations but I got sick of the song.

As far as multiple sounds ,hmmmmmmmmmmmmm
All times are UTC Page 10 of 24

Powered by phpBB® Forum Software © phpBB Limited