stevehopwoodforex.com
https://www.stevehopwoodforex.com/phpBB3/
Print view

Macd Stochastic Fractal MA5/25 Daily Marylin
https://www.stevehopwoodforex.com/phpBB3/viewtopic.php?t=1448		 Page 97 of 141
Author:  phil_trade [ Tue Oct 01, 2013 6:07 pm ]
Post subject:  Re: Macd Stochastic Fractal MA5/25 Daily Marylin
Hi all

Q3 2013 end with a very good results after 6 months !

Philippe
Author:  Zypip [ Tue Oct 01, 2013 10:02 pm ]
Post subject:  Re: Macd Stochastic Fractal MA5/25 Daily Marylin
Hi Phil,

Was just wondering one thing. I know that the S/R indi must be attached to all charts but is there a way to know if marylin has taken it into account ? I remember reading in the thread that the S/R indi should reload every hour or so but I don't see this happening in the my journal/expert tabs :(

Thanks for your input and great results you have indeed, very encouraging.

Cheers,

Zyp
Author:  milanese [ Tue Oct 01, 2013 10:31 pm ]
Post subject:  Re: Macd Stochastic Fractal MA5/25 Daily Marylin
Hi Zyp,

if you are using 0.36 or 0.36b there is no need of the indi attached, it is intergrated in the EA code.
10/05/2013 0.36
- merged no_indi fix by php
- changed TimeElapsedSinceLastHistoTrade() calculation, to calculate from closure of last histo trade, instead of opening.
Cheers :)

Tommaso
Author:  zTB [ Tue Oct 01, 2013 10:47 pm ]
Post subject:  Re: Macd Stochastic Fractal MA5/25 Daily Marylin
I think a pointed gun is quite out of place here.

Even if the pointing is only playfully.

Perhaps I am in a minority of one?

Z
Author:  milanese [ Tue Oct 01, 2013 11:01 pm ]
Post subject:  Re: Macd Stochastic Fractal MA5/25 Daily Marylin
zTB wrote:I think a pointed gun is quite out of place here.

Even if the pointing is only playfully.

Perhaps I am in a minority of one?

Z
Hi Z,

thank you for your post, I think the same ..so we are two

Cheers :)
Tommaso
Author:  phil_trade [ Wed Oct 02, 2013 3:58 am ]
Post subject:  Re: Macd Stochastic Fractal MA5/25 Daily Marylin
milanese wrote:Hi Zyp,

if you are using 0.36 or 0.36b there is no need of the indi attached, it is intergrated in the EA code.
10/05/2013 0.36
- merged no_indi fix by php
- changed TimeElapsedSinceLastHistoTrade() calculation, to calculate from closure of last histo trade, instead of opening.
Cheers :)

Tommaso
Hello Zyp and Milanese

I look to this modification : It's only for Fractal value that's the code was replace by a new Fractal() function call instead of using Fractal from S/R zone.

But :

1 - I'm not sure that's exactly the same Fractal. Could someone do the compare and check if it is ? Fractal is used to Move SL.

2 - If you want to use Nb Hit, you always need to use S/R indi as EA read Global Variable generate by this indi. Just set param. Show Fractal to false.

example :

Code: Select all

bool AllowedDistanceSRForBuy(string strSymbol)
{
	bool DistanceSR=true;
	for(int i=0;i<=50;i++)
	{
		string MyObjectHit=StringConcatenate("SSSR_HITS_",Symbol(),PERIOD_FRACTAL,i);
		string MyObjectHi=StringConcatenate("SSSR_HI_",Symbol(),PERIOD_FRACTAL,i);
		string MyObjectLo=StringConcatenate("SSSR_LO_",Symbol(),PERIOD_FRACTAL,i);
		
		if(!GlobalVariableCheck(MyObjectHit))continue;
		if(GlobalVariableGet(MyObjectHit)>=NbHitMaxSRZoneToTakeTrade)
		{
			double MyHiPrice=GlobalVariableGet(MyObjectHi);
			double MyLoPrice=GlobalVariableGet(MyObjectLo);
			
			if((Bid<=MyLoPrice)&&((MyLoPrice-Bid)<(DeltaPipsFromSRZoneToTakeTrade*Point)))DistanceSR=false;
			if((Bid>=MyLoPrice)&&(Bid<=MyHiPrice))DistanceSR=false;
			if(MyLoPrice*MyHiPrice<(1*Point))DistanceSR=false;
			break;
		}
	}
	return(DistanceSR);
}


bool AllowedDistanceSRForSell(string strSymbol)
{
	bool DistanceSR=true;
	for(int i=0;i<=50;i++)
	{
		string MyObjectHit=StringConcatenate("SSSR_HITS_",Symbol(),PERIOD_FRACTAL,i);
		string MyObjectHi=StringConcatenate("SSSR_HI_",Symbol(),PERIOD_FRACTAL,i);
		string MyObjectLo=StringConcatenate("SSSR_LO_",Symbol(),PERIOD_FRACTAL,i);
		
		if(!GlobalVariableCheck(MyObjectHit))continue;
		if(GlobalVariableGet(MyObjectHit)>=NbHitMaxSRZoneToTakeTrade)
		{
			double MyHiPrice=GlobalVariableGet(MyObjectHi);
			double MyLoPrice=GlobalVariableGet(MyObjectLo);
			
			if((Bid>=MyHiPrice)&&((Bid-MyHiPrice)<(DeltaPipsFromSRZoneToTakeTrade*Point)))DistanceSR=false;
			if((Bid>=MyLoPrice)&&(Bid<=MyHiPrice))DistanceSR=false;
			if(MyLoPrice*MyHiPrice<(1*Point))DistanceSR=false;
			break;
		}
	}
	return(DistanceSR);
}
I'm quite very busy with my V2 version so if someone could control this ?

cheers

Philippe
Author:  phil_trade [ Wed Oct 02, 2013 4:03 am ]
Post subject:  Re: Macd Stochastic Fractal MA5/25 Daily Marylin
milanese wrote:
zTB wrote:I think a pointed gun is quite out of place here.

Even if the pointing is only playfully.

Perhaps I am in a minority of one?

Z
Hi Z,

thank you for your post, I think the same ..so we are two

Cheers :)
Tommaso
Yes, I don't appreciate this avatar, and also some silly comment of it's owner !
So I will delete all posts with this bad avatar, and also all future silly comment. It's a good place here, it must stay like this :D
Author:  Mike [ Wed Oct 02, 2013 5:05 am ]
Post subject:  Re: Macd Stochastic Fractal MA5/25 Daily Marylin
phil_trade wrote:
milanese wrote:
zTB wrote:I think a pointed gun is quite out of place here. Z
Hi Z, thank you for your post, I think the same ..so we are two Cheers :) Tommaso
Yes, I don't appreciate this avatar, and also some silly comment of it's owner !
So I will delete all posts with this bad avatar, and also all future silly comment. It's a good place here, it must stay like this :D
Thank you, Mike
Author:  milanese [ Wed Oct 02, 2013 5:34 am ]
Post subject:  Re: Macd Stochastic Fractal MA5/25 Daily Marylin
phil_trade wrote:
Hello Zyp and Milanese

I look to this modification : It's only for Fractal value that's the code was replace by a new Fractal() function call instead of using Fractal from S/R zone.

But :

1 - I'm not sure that's exactly the same Fractal. Could someone do the compare and check if it is ? Fractal is used to Move SL.

2 - If you want to use Nb Hit, you always need to use S/R indi as EA read Global Variable generate by this indi. Just set param. Show Fractal to false.

example :

Code: Select all

bool AllowedDistanceSRForBuy(string strSymbol)
{
	bool DistanceSR=true;
	for(int i=0;i<=50;i++)
	{
		string MyObjectHit=StringConcatenate("SSSR_HITS_",Symbol(),PERIOD_FRACTAL,i);
		string MyObjectHi=StringConcatenate("SSSR_HI_",Symbol(),PERIOD_FRACTAL,i);
		string MyObjectLo=StringConcatenate("SSSR_LO_",Symbol(),PERIOD_FRACTAL,i);
		
		if(!GlobalVariableCheck(MyObjectHit))continue;
		if(GlobalVariableGet(MyObjectHit)>=NbHitMaxSRZoneToTakeTrade)
		{
			double MyHiPrice=GlobalVariableGet(MyObjectHi);
			double MyLoPrice=GlobalVariableGet(MyObjectLo);
			
			if((Bid<=MyLoPrice)&&((MyLoPrice-Bid)<(DeltaPipsFromSRZoneToTakeTrade*Point)))DistanceSR=false;
			if((Bid>=MyLoPrice)&&(Bid<=MyHiPrice))DistanceSR=false;
			if(MyLoPrice*MyHiPrice<(1*Point))DistanceSR=false;
			break;
		}
	}
	return(DistanceSR);
}


bool AllowedDistanceSRForSell(string strSymbol)
{
	bool DistanceSR=true;
	for(int i=0;i<=50;i++)
	{
		string MyObjectHit=StringConcatenate("SSSR_HITS_",Symbol(),PERIOD_FRACTAL,i);
		string MyObjectHi=StringConcatenate("SSSR_HI_",Symbol(),PERIOD_FRACTAL,i);
		string MyObjectLo=StringConcatenate("SSSR_LO_",Symbol(),PERIOD_FRACTAL,i);
		
		if(!GlobalVariableCheck(MyObjectHit))continue;
		if(GlobalVariableGet(MyObjectHit)>=NbHitMaxSRZoneToTakeTrade)
		{
			double MyHiPrice=GlobalVariableGet(MyObjectHi);
			double MyLoPrice=GlobalVariableGet(MyObjectLo);
			
			if((Bid>=MyHiPrice)&&((Bid-MyHiPrice)<(DeltaPipsFromSRZoneToTakeTrade*Point)))DistanceSR=false;
			if((Bid>=MyLoPrice)&&(Bid<=MyHiPrice))DistanceSR=false;
			if(MyLoPrice*MyHiPrice<(1*Point))DistanceSR=false;
			break;
		}
	}
	return(DistanceSR);
}
I'm quite very busy with my V2 version so if someone could control this ?

cheers

Philippe
Hi Philippe,

yes, you are 100% right it is only a part integration of the indicator, will later have a look if I not would be better to integrate the indicatorcode completly, so that their is really no need for attaching it...

Code: Select all

double Fractal(int TimeFrame, double FractalFactor, int M, int shift)
{
   int P = TimeFrame * FractalFactor;
   if (TimeFrame > P)
      P = TimeFrame;
   
   P = P / TimeFrame*2 + MathCeil(P / TimeFrame / 2);
   
   if (shift < P)
      return(0);

   if (shift > iBars(Symbol(), TimeFrame)-P)
      return(0); 
   
   for (int i=1; i<=P; i++)
   {
      if (M == 1)
      {
         if (iHigh(NULL, TimeFrame, shift+i) >= iHigh(NULL, TimeFrame, shift))
            return(0);
         if (iHigh(NULL, TimeFrame, shift-i) >= iHigh(NULL, TimeFrame, shift))
            return(0);     
      }
      if (M == -1)
      {
         if (iLow(NULL, TimeFrame, shift+i) <= iLow(NULL, TimeFrame, shift))
            return(0);
         if (iLow(NULL, TimeFrame, shift-i) <= iLow(NULL, TimeFrame, shift))
            return(0);
      }        
   }
   switch(M)
   {
      case -1 : return(iLow(NULL, TimeFrame, shift));
      case  1 : return(iHigh(NULL, TimeFrame, shift));
      default : return(0);
   } 
}  

/* ^^^ PhP71 ^^^ */
Cheers :)

Tommaso
Author:  zTB [ Wed Oct 02, 2013 6:23 am ]
Post subject:  Re: Macd Stochastic Fractal MA5/25 Daily Marylin
Thank you, Tommaso, Phil, Mike, and all those were offended but stayed quite out of politeness.

Z
All times are UTC Page 97 of 141

Powered by phpBB® Forum Software © phpBB Limited