Old and defunct Holy Graily Bob

EA's inspired by nanningbob's work here, especially those based on his 240 Moving Average trend detection filter.
Locked
User avatar
Bogie6953
Trader
Posts: 14
Joined: Sat Aug 03, 2013 12:47 pm

Holy Graily Bob

Post by Bogie6953 »

SteveHopwood » Sun Dec 21, 2014 6:07 pm wrote:
Bogie6953 » Sun Dec 21, 2014 8:54 pm wrote:
What a great idea! Wish I had thought of it. :hi:

If I could only add to the idea...on a very conservative approach, it would be good to use the TrendWavy signal as the main base signal, and have any other signals trigger a trade ONLY if an open TrendWavy trade already exists. Just my two centons. 8-)
Hmmmmm. You do want HGB to take the occasional trade don't you? Slightly more than once a decade?

:xm:
Hi Steve,

Considering Pac's idea of trading the lower timeframes, and if a lookback option could be implemented, I think there would be more than enough trades to keep everyone on their toes. But I may be all wet. Certainly open to criticism on that point.

Thanks for all your great work! :)
Neno0102
Trader
Posts: 30
Joined: Wed Jan 04, 2012 4:25 pm

Holy Graily Bob

Post by Neno0102 »

Hi,

Just wanted to confirm Pac's theory , was about to write about that and how strong are those signals when alligned so lookback will be perfect to add to HGB. Just wanted to show a pic where Wave+Wave (Buffer 6 followed by buffer 7) is also very strong even on H1.

Cheers :xm:
22-12-2014- 11-44-26.png
You do not have the required permissions to view the files attached to this post.
User avatar
boinvest
Trader
Posts: 142
Joined: Wed May 28, 2014 6:56 am
Location: Netherlands

Holy Graily Bob

Post by boinvest »

Hi All, thanks for the great work. :good:

I wanted to contribute by tracking this error down.. But couldn't manage it. :oops:
I've loaded up v2b on my charts.
I am getting "OP_Sell order send failed with error(4051): Invalid function parameter value."
Invalid lots amount value for OrderSend function.
Anyone else experiencing this error? I think it is the Range sell triggering this error. :geek:
Surprisingly I've got this error multiple times today, only on this pair.
I attached a screenshot, but the HGI does'nt show clearly the signal, althoug the white line is displayed.

Rad Trades,
When I was comparing forward test data, I found that the multiple rad entrys had a slightly better profit factor then the single entry. It's slightly better on entering a trade then the first signal.

Looking at all the data available, the multiple entries didn't use a stop loss.
Which causes that the very few losing trades, which occasionally happened gave away much of the profit.
Would it be possible to code an SL on the Multiple Rad trades? :P

The same could be true for the Trend trades. But I have not enough data to prove this concept.
You do not have the required permissions to view the files attached to this post.
bazze

Holy Graily Bob

Post by bazze »

A very good result on EURSEK today...So,trading some exotic pairs can be successful :smile:
You do not have the required permissions to view the files attached to this post.
User avatar
SteveHopwood
Owner
Posts: 9904
Joined: Tue Nov 15, 2011 8:43 am
Location: Misterton - an insignificant village in England. Very pleasant to live in.

Holy Graily Bob

Post by SteveHopwood »

V 2d is in post 1, with two new inputs in the Trend/Wave section: TrendCandlesLookBack and WaveCandlesLookBack, defaulting to 4 and 3 respectively. Also added Dave's extra pip factor code so you guys can trade the exotics - remember you might have to adjust the values for non GP accounts.

----------------------------------------------------

Tommaso has sent me the HGI library code - don't worry if you do not understand that.

Frankly, I shudder at the chaos this could cause. I once tried to use Matts LibOrderReliable library and was instantly hit by a wall of stupidity erected by those unable to put the files in the correct folders. That is why I hacked the bits I actually needed for my own use.

We have already had people here unable even to put the EA into the correct folder. Care to imagine what will happen if I hit them with a library?

So, does anyone know of a reliable and free file distribution utility?

:xm:
Read the effing manual, ok?

Afterprime is the official SHF broker. Read about them at https://www.stevehopwoodforex.com/phpBB3/viewtopic.php?p=175790#p175790.

I still suffer from OCCD. Good thing, really.

Anyone here feeling generous? My paypal account is always in the market for a tiny donation. pianodoodler@hotmail.com is the account.

To see The Weekly Roundup of stuff you guys might have missed Click here

My special thanks to Thomas (tomele) for all the incredible work he does here.
bazze

Holy Graily Bob

Post by bazze »

Will this effect the EA's behaviour when using this Library-code?
(File-Open Data Folder-MQL4-Libraries or Include...right? :smile: )
Last edited by bazze on Mon Dec 22, 2014 6:05 pm, edited 1 time in total.
Radar
Trader
Posts: 437
Joined: Fri Mar 23, 2012 5:39 pm
Location: Round the bend ;)

Holy Graily Bob

Post by Radar »

Hey Steve,

A library?? 'Alf of 'em wouldn't even read a post if they ran into it. and someone's gone and built a library??

I guess you could put it in a directory and zip it up, but we both know that some will just pull it out, and ask where to shove it.

A few places come to mind...

Take care,

&

Have fun!

Radar =8^)
Check out my new, (well, old now), manual trade & automatic scale-in manager,
StackManV2
bazze

Holy Graily Bob

Post by bazze »

:smile: :smile: :smile: :smile: :smile: You,funny man :smile: :smile: :smile: :smile:
User avatar
hopfi2k
Trader
Posts: 35
Joined: Tue Nov 15, 2011 11:03 pm
Location: Germany

Holy Graily Bob

Post by hopfi2k »

SteveHopwood » Mon Dec 22, 2014 6:12 pm wrote:V 2d is in post 1, with two new inputs in the Trend/Wave section: TrendCandlesLookBack and WaveCandlesLookBack, defaulting to 4 and 3 respectively. Also added Dave's extra pip factor code so you guys can trade the exotics - remember you might have to adjust the values for non GP accounts.

----------------------------------------------------

Tommaso has sent me the HGI library code - don't worry if you do not understand that.

Frankly, I shudder at the chaos this could cause. I once tried to use Matts LibOrderReliable library and was instantly hit by a wall of stupidity erected by those unable to put the files in the correct folders. That is why I hacked the bits I actually needed for my own use.

We have already had people here unable even to put the EA into the correct folder. Care to imagine what will happen if I hit them with a library?

So, does anyone know of a reliable and free file distribution utility?

:xm:
Steve,

You should consider https://fx1.net/easetup.php. Freeware. Works. Easy.

Cheers
hopfi2k
User avatar
SteveHopwood
Owner
Posts: 9904
Joined: Tue Nov 15, 2011 8:43 am
Location: Misterton - an insignificant village in England. Very pleasant to live in.

Holy Graily Bob

Post by SteveHopwood »

hopfi2k » Mon Dec 22, 2014 7:01 pm wrote:
Steve,

You should consider https://fx1.net/easetup.php. Freeware. Works. Easy.

Cheers
hopfi2k
Nice one. Thanks. :clap:

:xm:
Read the effing manual, ok?

Afterprime is the official SHF broker. Read about them at https://www.stevehopwoodforex.com/phpBB3/viewtopic.php?p=175790#p175790.

I still suffer from OCCD. Good thing, really.

Anyone here feeling generous? My paypal account is always in the market for a tiny donation. pianodoodler@hotmail.com is the account.

To see The Weekly Roundup of stuff you guys might have missed Click here

My special thanks to Thomas (tomele) for all the incredible work he does here.
Locked

Return to “Thingy Bob EA's”