FirstStrike Plus – Weekly Volatility Breakout

Post Reply
User avatar
Aussiedoc
Trader
Posts: 270
Joined: Tue Dec 13, 2011 8:10 am
Location: Western District. Victoria. Australia

FirstStrike Plus – Weekly Volatility Breakout

Post by Aussiedoc »

If you change the TF or close your Empty4 the EA will reinitialize and not work correct, it is made only for computers 24/24 7/7 online and never change the TF, than the lines will be there after creating, all the time till one order is filled.. Cheers :) Tommaso
Tomasso, g'day! :hi: :good:

Just checking!

Due to mains voltage variations that regularly shut sectors of this area down for varying lengths of time, for safety reasons, I turn my desktop off at the local time here (AEDST) approx equivalent to the end of the Friday NY session and open it again roughly about the open of the NZ market on Monday morning.

From the above; my understanding is that doing so will cause the programme to repaint when it reopens but should not affect any open trades. Correct?? :?:

Cheers :)
If you can never exceed your own expectations - why expect second-best?
ace81
Trader
Posts: 44
Joined: Thu Dec 26, 2013 6:31 pm

FirstStrike Plus – Weekly Volatility Breakout

Post by ace81 »

milanese » Mon Dec 29, 2014 1:39 am wrote:
ace81 » Sun Dec 28, 2014 4:46 pm wrote: I did not mean to hiding it, i'm just too busy to sharing the link and setting it to you guys..
If i want to hiding it i won't posting the result :arrrg: :arrrg:

Edit: my fxbook link updated with history open, sorry for the trouble
:good: thank you, and a big thank you for your testing!!

Cheers :)

Tommaso
Big thanks for this great forum and great people in SHF :good:
ace81
Trader
Posts: 44
Joined: Thu Dec 26, 2013 6:31 pm

FirstStrike Plus – Weekly Volatility Breakout

Post by ace81 »

For some reason myfxbook can't update...

I'll try to fix it tonight, sorry for the trouble
You do not have the required permissions to view the files attached to this post.
User avatar
milanese
TechAdmin
Posts: 3293
Joined: Wed Jan 09, 2013 9:02 am
Location: btr rdx, r8 +

FirstStrike Plus – Weekly Volatility Breakout

Post by milanese »

Aussiedoc » Mon Dec 29, 2014 3:37 am wrote:
If you change the TF or close your Empty4 the EA will reinitialize and not work correct, it is made only for computers 24/24 7/7 online and never change the TF, than the lines will be there after creating, all the time till one order is filled.. Cheers :) Tommaso
Tomasso, g'day! :hi: :good:

Just checking!

Due to mains voltage variations that regularly shut sectors of this area down for varying lengths of time, for safety reasons, I turn my desktop off at the local time here (AEDST) approx equivalent to the end of the Friday NY session and open it again roughly about the open of the NZ market on Monday morning.

From the above; my understanding is that doing so will cause the programme to repaint when it reopens but should not affect any open trades. Correct?? :?:

Cheers :)
this will not have any negativ effect on the functionality of the EA,only if you shutdown your platform during the markets are open it will cause problems...

Cheers :)

Tommaso
Global Prime is the official SHF broker :yahoo:
Searching for Servers and Workstations with individual configuration?
Just PM
:smile: Click here to go to the BoardKnowledgeBase
NOTE: Cookies and JavaScript are required for the using the board, with full functionality
Radar
Trader
Posts: 437
Joined: Fri Mar 23, 2012 5:39 pm
Location: Round the bend ;)

FirstStrike Plus – Weekly Volatility Breakout

Post by Radar »

Hey Tommaso,

What about storing the pendings as GV's , to protect against power-outs/restarts?

Have fun!

Radar =8^)
Check out my new, (well, old now), manual trade & automatic scale-in manager,
StackManV2
User avatar
milanese
TechAdmin
Posts: 3293
Joined: Wed Jan 09, 2013 9:02 am
Location: btr rdx, r8 +

FirstStrike Plus – Weekly Volatility Breakout

Post by milanese »

Radar » Mon Dec 29, 2014 7:51 am wrote:Hey Tommaso,

What about storing the pendings as GV's , to protect against power-outs/restarts?

Have fun!

Radar =8^)
I thought about this and I will add this if asked with the next update..

Cheers :)

Tommaso
Global Prime is the official SHF broker :yahoo:
Searching for Servers and Workstations with individual configuration?
Just PM
:smile: Click here to go to the BoardKnowledgeBase
NOTE: Cookies and JavaScript are required for the using the board, with full functionality
User avatar
milanese
TechAdmin
Posts: 3293
Joined: Wed Jan 09, 2013 9:02 am
Location: btr rdx, r8 +

[NewVersion] FirstStrike Plus – Weekly Volatility Breakout

Post by milanese »

milanese » Mon Dec 29, 2014 7:54 am wrote:
Radar » Mon Dec 29, 2014 7:51 am wrote:Hey Tommaso,

What about storing the pendings as GV's , to protect against power-outs/restarts?

Have fun!

Radar =8^)
I thought about this and I will add this if asked with the next update..

Cheers :)

Tommaso
Thanks Radar for your idea :good: , new version on first post.
The new version will remember the last Pendings calculated and restore them, just in case you had to restart Empty4, or the EA was with an other reason reintialized, so this version is much easier to handle.

Cheers :)

Tommaso
Global Prime is the official SHF broker :yahoo:
Searching for Servers and Workstations with individual configuration?
Just PM
:smile: Click here to go to the BoardKnowledgeBase
NOTE: Cookies and JavaScript are required for the using the board, with full functionality
User avatar
milanese
TechAdmin
Posts: 3293
Joined: Wed Jan 09, 2013 9:02 am
Location: btr rdx, r8 +

[NewVersion] FirstStrike Plus – Weekly Volatility Breakout

Post by milanese »

milanese » Mon Dec 29, 2014 9:04 am wrote: Thanks Radar for your idea :good: , new version on first post.
The new version will remember the last Pendings calculated and restore them, just in case you had to restart Empty4, or the EA was with an other reason reintialized, so this version is much easier to handle.

Cheers :)

Tommaso
As I had some requests for posting the ex4 , here it comes...
FirstStrikeWeeklyBO_G.ex4
Cheers :)

Tommaso
You do not have the required permissions to view the files attached to this post.
Global Prime is the official SHF broker :yahoo:
Searching for Servers and Workstations with individual configuration?
Just PM
:smile: Click here to go to the BoardKnowledgeBase
NOTE: Cookies and JavaScript are required for the using the board, with full functionality
User avatar
Aussiedoc
Trader
Posts: 270
Joined: Tue Dec 13, 2011 8:10 am
Location: Western District. Victoria. Australia

FirstStrike Plus – Weekly Volatility Breakout

Post by Aussiedoc »

milanese » Mon Dec 29, 2014 5:54 pm wrote:
Radar » Mon Dec 29, 2014 7:51 am wrote:Hey Tommaso, what about storing the pendings as GV's , to protect against power-outs/restarts? Have fun! Radar =8^)
I thought about this and I will add this if asked with the next update.. Cheers :) Tommaso
Radar, thanks for the brilliant suggestion above! :good: :good:
Tomasso, my/our thanks for working so quickly to implement the change suggested. :cheer: :cheer: :cheer:

FWIW I loaded it late Sunday. It went to work at the SYD open yesterday AM. Here are the results so far!
OANDA first strike.png
Can't wait to watch it work when the markets get back! :smile:
Wishing you and everyone a very successful and prosperous 2015 :party:
Cheers! :)
You do not have the required permissions to view the files attached to this post.
If you can never exceed your own expectations - why expect second-best?
xfactornos
Trader
Posts: 115
Joined: Fri May 23, 2014 5:43 pm
Location: Where I am...

FirstStrike Plus – Weekly Volatility Breakout

Post by xfactornos »

Are you running this OOTB?

Can someone explain how the take profit and BE stuff works in this bot? Does 1.0 mean 1% of my account balance? and like BE being 4.0 means 4% of balance?
Aussiedoc » Mon Dec 29, 2014 6:24 pm wrote:
milanese » Mon Dec 29, 2014 5:54 pm wrote:
Radar » Mon Dec 29, 2014 7:51 am wrote:Hey Tommaso, what about storing the pendings as GV's , to protect against power-outs/restarts? Have fun! Radar =8^)
I thought about this and I will add this if asked with the next update.. Cheers :) Tommaso
Radar, thanks for the brilliant suggestion above! :good: :good:
Tomasso, my/our thanks for working so quickly to implement the change suggested. :cheer: :cheer: :cheer:

FWIW I loaded it late Sunday. It went to work at the SYD open yesterday AM. Here are the results so far! Can't wait to watch it work when the markets get back! :smile:
Wishing you and everyone a very successful and prosperous 2015 :party:
Cheers! :)
John 3:16
Post Reply

Return to “Automated trading systems”