HGI - Page 75

krikri · Post by **krikri** » Mon Dec 22, 2014 9:40 am

Hi Alorente, can you post the LWMA indicator you use with True Strength Indicator (TSI).

Thanks in advance.

Kris

Nidolap · Post by **Nidolap** » Mon Dec 22, 2014 10:14 am

nanningbob » Mon Dec 22, 2014 10:36 am wrote:
Nidolap » Mon Dec 22, 2014 2:44 am wrote:
I had this problem once, what I did was force the router on G (56Mbps) and disable N (300 Mbps). After that my connection became stable...give it a try!
Wonder if I can do that with the wifi boost I bought?

I think you can because it will boost the WiFi connection independently of which speed it is selected.

Just go to router configuration page and see if you can block it on 802.11G instead of letting it auto select the speed.

Post by **xrismak** » Mon Dec 22, 2014 12:28 pm

taipan » Mon Dec 22, 2014 7:27 am wrote:
I am doing the same as you do. On top of that, download freeware, teracopy and install it. If old files exist, When doing copying, drag new files onto the folder that you want to copy, use "skid all" buttons to prevent override existing file and then use "verify" to compare whether there are the same files or not. If not, use "Overwrite All" to override and get rid of the old files. This is one of the method of copying files I used everyday.

Hope that help.

Taipan,

Plenty Many Thanks for that TIP, it makes Life a Bit Easier now.... Just installed the teracopy Tool and wow, I like it, does what I want Faster....

Cheers,
xrismak

Post by **alorente** » Mon Dec 22, 2014 12:54 pm

krikri » Mon Dec 22, 2014 10:40 am wrote:Hi Alorente, can you post the LWMA indicator you use with True Strength Indicator (TSI).

Thanks in advance.

Kris

It is the standard Empty4 MA. Just change the parameters as I indicated.

Nidolap · Post by **Nidolap** » Mon Dec 22, 2014 1:07 pm

Well, I will try to explain this the clearest I can.

I am using the 15.06 HGI on EURUSD M1, on what I am testing every indicator is disabled except the big arrow trades. Checking the image below we have on top the signals that poped up and below the same chart but with an indicator refresh, as you can see some disappeared and others appeared. I don't want to take this to repaint discussion, what I thought is that when refreshing the chart some signals might go away (not valid anymore) but what I didn't see coming was that it could plot other ones that occurred in the past and never showed up in real time.

This is probably an issue using M1 candles but just wanted to check if there is any option on HGI settings to avoid this.

My goal with this is to trade the big arrows when they show up on the correct side on Hurst indicator, but I will share this idea when it gets more solid.

Regards!

EDIT : Sorry, the chart with the HGI refresh is the top one!

EURUSD_M1.PNG

xfactornos · Post by **xfactornos** » Mon Dec 22, 2014 2:44 pm

All the time frames do that (H4,H1,M30,M15). I always just thought that was the way it was designed. I always just remember that any chart that is not live is absolutely useless to look at.

Nidolap » Mon Dec 22, 2014 8:07 am wrote:Well, I will try to explain this the clearest I can.

I am using the 15.06 HGI on EURUSD M1, on what I am testing every indicator is disabled except the big arrow trades. Checking the image below we have on top the signals that poped up and below the same chart but with an indicator refresh, as you can see some disappeared and others appeared. I don't want to take this to repaint discussion, what I thought is that when refreshing the chart some signals might go away (not valid anymore) but what I didn't see coming was that it could plot other ones that occurred in the past and never showed up in real time.

This is probably an issue using M1 candles but just wanted to check if there is any option on HGI settings to avoid this.

My goal with this is to trade the big arrows when they show up on the correct side on Hurst indicator, but I will share this idea when it gets more solid.

Regards!

EDIT : Sorry, the chart with the HGI refresh is the top one!

Post by **alorente** » Mon Dec 22, 2014 3:17 pm

Nidolap » Mon Dec 22, 2014 2:07 pm wrote:Well, I will try to explain this the clearest I can.

I am using the 15.06 HGI on EURUSD M1, on what I am testing every indicator is disabled except the big arrow trades. Checking the image below we have on top the signals that poped up and below the same chart but with an indicator refresh, as you can see some disappeared and others appeared. I don't want to take this to repaint discussion, what I thought is that when refreshing the chart some signals might go away (not valid anymore) but what I didn't see coming was that it could plot other ones that occurred in the past and never showed up in real time.

This is probably an issue using M1 candles but just wanted to check if there is any option on HGI settings to avoid this.

My goal with this is to trade the big arrows when they show up on the correct side on Hurst indicator, but I will share this idea when it gets more solid.

Regards!

EDIT : Sorry, the chart with the HGI refresh is the top one!

My research so far with 15.06 HGI shows there are very few real Trend Arrows. Most of them show up several candles after the fact or in some cases morph from a Range arrow to a Trend Arrow. About half of all wavy symbols also happen after the fact. That is why 15.06 breaks new ground. It let´s you see HGI as it really is.

crashout · Post by **crashout** » Mon Dec 22, 2014 3:34 pm

Bob,

For your wifi, you can try to buy a usb key wifi (you can find cheap 25-30 $), sometimes the cards on the computers are not so good.

That's what i did for an old laptop, and it worked.

flyer415 · Post by **flyer415** » Mon Dec 22, 2014 3:35 pm

alorente » Mon Dec 22, 2014 9:17 am wrote: My research so far with 15.06 HGI shows there are very few real Trend Arrows. Most of them show up several candles after the fact or in some cases morph from a Range arrow to a Trend Arrow. About half of all wavy symbols also happen after the fact. That is why 15.06 breaks new ground. It let´s you see HGI as it really is.

One way that I use to take advantage of this particular feature is that i use the Trend Arrows as just that...TREND.

I don't think of them as Entry Arrows but only as Trend Arrows. usually about 3 or 4 candles after a Trend Arrow I will see a Fractal. I just place a pending a few pips past the break of the fractal. I use a 100 pip SL and a BE of 50 pips. The vast majority of the RAD Arrows will be at the Fractal because that fundamentally is what the RAD arrow is signalling.

If a Trend Arrow is still there 3 or 4 candles later then it is permanent.

Just an easy and conservative use of HGI.

Brian

Post by **rosst** » Mon Dec 22, 2014 3:39 pm

xrismak » Mon Dec 22, 2014 12:52 am wrote:
rosst » Sun Dec 21, 2014 4:34 pm wrote:Maybe we need a thread for computer help! My computer recently crashed and I am having to re-install everything
Empty4 is a pain now because you can no longer just copy over the backed up Empty4 folder. I have been working on this for a week now!
Rosst,

There is a Simple way round it, this is How I get round Crap T4, I simply Have a Copy of my MQL4 and Templates Folder in a Safe Place , So anytime I need to re install my Computer's OS, I Simply download my Criminal's Meta Trader Software and Replace both the MQL4 and Templates Folders with what I Have Saved before, that way I really aren't Loosing anything....

Hope this Helps.

xrismak

Thank you xrismak & tiapan! I have been using a program from microsoft called synctoy every week. I have a backup drive where I keep the copies of my platforms - but now I will also look at TeraCopy. But good to know I only need 2 folders instead of the whole platform. So many smart guys here - amazing!
:!!: