HGI - Page 125

pacers · Post by **pacers** » Mon Jan 19, 2015 3:15 pm

I read BOB saying that he uses the HGI together with 100 lines. Can someone please tell me what the 100 lines are?

Thanks a lot

Post by **fullaforex** » Mon Jan 19, 2015 3:19 pm

pacers » Tue Jan 20, 2015 12:00 am wrote:I read BOB saying that he uses the HGI together with 100 lines. Can someone please tell me what the 100 lines are?

Thanks a lot

put the HGI template on a chart and you will see!

Post by **fullaforex** » Mon Jan 19, 2015 3:24 pm

pacers » Tue Jan 20, 2015 12:06 am wrote:
fullaforex » Mon Jan 19, 2015 3:19 pm wrote:
pacers » Tue Jan 20, 2015 12:00 am wrote:I read BOB saying that he uses the HGI together with 100 lines. Can someone please tell me what the 100 lines are?

Thanks a lot
put the HGI template on a chart and you will see!
I have it but there are no lines at all (horizontal I would assume). Could you please explain?

did you load the TEMPLATE?

Post by **fullaforex** » Mon Jan 19, 2015 3:31 pm

pacers » Tue Jan 20, 2015 12:13 am wrote:
I might sound stupid but let me give it a try.

1. Open chart

2. Go to Charts, Template, Load Template..., Select Template HGI Dark V 14.02

If by 'loading' you mean something different than that please explain.

I am new to the whole 'custom' indi, template thingy so I am learning by the day. Some stuff that might seem DUH to you might be a bit more complicated for me so please make an effort to explain without using capital letters.

Read post 1

JFonseca · Post by **JFonseca** » Mon Jan 19, 2015 3:40 pm

Too much post off topic or with basic questions

Please use the threads as intended by the authors.

Thanks,
JFonseca

Post by **dclayw** » Tue Jan 20, 2015 7:36 am

I'm using HGI 15.09. Sometimes when 2 symbols appear on the same bar I get the alert only for one of the symbols. See the attached GBPNZD H4 where there is a green range arrow/trend arrow combo on the same bar. I received the alert for the range arrow which I'm not trading, but I didn't receive the alert for the trend arrow, which I am trading. Is it a bug that I didn't receive the alert for the trend arrow? I ofcourse have both trend and range arrows configured to alert me.

Post by **milanese** » Tue Jan 20, 2015 7:40 am

dclayw » Tue Jan 20, 2015 7:36 am wrote:I'm using HGI 15.09. Sometimes when 2 symbols appear on the same bar I get the alert only for one of the symbols. See the attached GBPNZD H4 where there is a green range arrow/trend arrow combo on the same bar. I received the alert for the range arrow which I'm not trading, but I didn't receive the alert for the trend arrow, which I am trading. Is it a bug that I didn't receive the alert for the trend arrow? I ofcourse have both trend and range arrows configured to alert me.

the arrow changed probably with the close of the bar, that is why you get only one time an alert..

Cheeers

Tommaso

milojohzak · Post by **milojohzak** » Tue Jan 20, 2015 12:15 pm

Thank you for the great indicator!

I Try the indicator from for about a month. This has been my first demo account, which is closed by CHF drama and the broker will soon no longer exist.

http://www.myfxbook.com/members/IBX_Tra ... mo/1107203

This is my current demo account:
http://www.myfxbook.com/members/IBX_Tra ... mo/1132797

I trade a mix of H4 and M5, M5 when I have time at the computer, and H4 of the rest.

This indicator provides very good signals and has lifted my trading a few steps to the top.

Thank you so much for that!!

PS.: Sorry for my bad english, I'm from Germany.

Post by **Bruster400** » Tue Jan 20, 2015 3:25 pm

Hi all,

Just noticed something and would like to understand what's going on. I have the indicator loaded on a H4 chart and it seems to be working fine. I then noticed on the matrix dashboard that I'd missed a Trend Up signal on GBPCAD - which went flying up 300 pips.

The thing is, the signal didn't appear on my chart - http://screencast.com/t/vk27Iizv3

I've loaded up another H4 chart and dropped the indi on. Hey presto, the signal is there: http://screencast.com/t/Szme0A5H9ZG. There are other signals that are also different / missing between the two charts too.

Both charts are open in the same platform with the same broker with the same template and settings. Those two grabs were taken just a few seconds apart.

Any ideas?

Thanks.

Post by **milanese** » Tue Jan 20, 2015 3:30 pm

Bruster400 » Tue Jan 20, 2015 3:25 pm wrote:Hi all,

Just noticed something and would like to understand what's going on. I have the indicator loaded on a H4 chart and it seems to be working fine. I then noticed on the matrix dashboard that I'd missed a Trend Up signal on GBPCAD - which went flying up 300 pips.

The thing is, the signal didn't appear on my chart - http://screencast.com/t/vk27Iizv3

I've loaded up another H4 chart and dropped the indi on. Hey presto, the signal is there: http://screencast.com/t/Szme0A5H9ZG. There are other signals that are also different / missing between the two charts too.

Both charts are open in the same platform with the same broker with the same template and settings. Those two grabs were taken just a few seconds apart.

Any ideas?

Thanks.

this is caused by the repaint effect from Tma that HGI uses...
If you do not reinitialize the indicator versions since 15.06 do not repaint, the HGI_matrix using the lib will always show a refresehd signal. And please do next time attach your img directly here in the board..

Cheers

Tommaso