Boinvests Holy Grail Playground

qvintus · Post by **qvintus** » Thu Mar 05, 2015 6:05 pm

Hi all!
I have run BoHGB 2x2 on D1 and H4 this week on 28 pairs.

On H4 it has taken only 6 trades for +62 pips.
I have HTF (highest) set to 1440 (Daily)
CandlesLookback 5
HGI Read: 180
MaxOverall trades 50
No DoubleMA filter
ChartRefresh: 180
All trading types set to true except Range trades.
The trades taken this week where: GoldWave/BlueWave/Rad
The GoldWave trades is closing at +50 pips TP, but is set to 30 in the EA parameters.

BoHGB H4 Myfxbook.png

-------------------------------------------------------

On D1 it has taken 8 trades for +280 pips.
I have HTF (highest) set to 10080 (weekly)
CandlesLookback 4
HGI Read: 180
MaxOverall trades 50
No DoubleMA filter
ChartRefresh: 180
All trading types set to true except Range trades.
The trades taken this week where only EURNZD RAD trades, not a single trade of any other trading type or pair!
The RAD trades is closing at +50 pips TP, but is set to 30 in the EA parameters

BoHGB D1 Myfxbook.png

---------------------------------------------------------

In my eyes it is very few trades. Could any of my settings affect this? I know HTF1440 is filtering out trades but this much? CandlesLookback? HGIRead?

Attaching setfiles (fresh new, built from latest 2x2)

Any comments is appreciated

Post by **Wiggy1965** » Fri Mar 06, 2015 3:23 am

qvintus » Fri Mar 06, 2015 4:05 am wrote:Hi all!
I have run BoHGB 2x2 on D1 and H4 this week on 28 pairs.

On H4 it has taken only 6 trades for +62 pips.
I have HTF (highest) set to 1440 (Daily)
CandlesLookback 5
HGI Read: 180
MaxOverall trades 50
No DoubleMA filter
ChartRefresh: 180
All trading types set to true except Range trades.
The trades taken this week where: GoldWave/BlueWave/Rad
The GoldWave trades is closing at +50 pips TP, but is set to 30 in the EA parameters.

-------------------------------------------------------

On D1 it has taken 8 trades for +280 pips.
I have HTF (highest) set to 10080 (weekly)
CandlesLookback 4
HGI Read: 180
MaxOverall trades 50
No DoubleMA filter
ChartRefresh: 180
All trading types set to true except Range trades.
The trades taken this week where only EURNZD RAD trades, not a single trade of any other trading type or pair!
The RAD trades is closing at +50 pips TP, but is set to 30 in the EA parameters

---------------------------------------------------------

In my eyes it is very few trades. Could any of my settings affect this? I know HTF1440 is filtering out trades but this much? CandlesLookback? HGIRead?

Attaching setfiles (fresh new, built from latest 2x2)

Any comments is appreciated

Hi Qvintus, thanks for the update....

do you have any open trades on both the 4h and 1D demos....?

also, the the D! trade report show all EURNZD shorts....I cant see from my charts that EURNZD has had a protracted run down, so this should have been pretty easy for the EA to make pips here....I will be interesting to see how the EA copes with retrace and now (i can see) a beginning of a further run lower.....do you currently have any EURNZD trades open....

It is only with the full picture can we tell how well things are going....

Regards
Wiggy

qvintus · Post by **qvintus** » Fri Mar 06, 2015 5:52 am

Wiggy1965 » 06 Mar 2015, 04:23 wrote:
Hi Qvintus, thanks for the update....

do you have any open trades on both the 4h and 1D demos....?

also, the the D! trade report show all EURNZD shorts....I cant see from my charts that EURNZD has had a protracted run down, so this should have been pretty easy for the EA to make pips here....I will be interesting to see how the EA copes with retrace and now (i can see) a beginning of a further run lower.....do you currently have any EURNZD trades open....

It is only with the full picture can we tell how well things are going....

Regards
Wiggy

I have only one trade open. And that is a EURNZD.
I am running both D1 and H4 on the same Empty4 but with different magics. I dont think I can tell if it the open trade is a H4 or D1 trade since they are on the same Empty4 terminal.

Post by **Wiggy1965** » Fri Mar 06, 2015 6:18 am

qvintus » Fri Mar 06, 2015 3:52 pm wrote:
Wiggy1965 » 06 Mar 2015, 04:23 wrote:
Hi Qvintus, thanks for the update....

do you have any open trades on both the 4h and 1D demos....?

also, the the D! trade report show all EURNZD shorts....I cant see from my charts that EURNZD has had a protracted run down, so this should have been pretty easy for the EA to make pips here....I will be interesting to see how the EA copes with retrace and now (i can see) a beginning of a further run lower.....do you currently have any EURNZD trades open....

It is only with the full picture can we tell how well things are going....

Regards
Wiggy
I have only one trade open. And that is a EURNZD.
I am running both D1 and H4 on the same Empty4 but with different magics. I dont think I can tell if it the open trade is a H4 or D1 trade since they are on the same Empty4 terminal.

If you use the exposure indicator it will show you the magic of the trades....

Wiggy

qvintus · Post by **qvintus** » Fri Mar 06, 2015 6:43 am

Wiggy1965 » 06 Mar 2015, 07:18 wrote:
If you use the exposure indicator it will show you the magic of the trades....

Wiggy

I will give full report after this weeks end.

Post by **kwchau** » Fri Mar 06, 2015 7:43 am

The RAD trades is closing at +50 pips TP, but is set to 30 in the EA parameters

---------------------------------------------------------
Any comments is appreciated

[/quote]

I noticed the same in my demo.

Post by **boinvest** » Fri Mar 06, 2015 10:38 am

almartins » Tue Mar 03, 2015 7:27 pm wrote:
almartins » Mon Mar 02, 2015 2:42 pm wrote:Yes BoHGB is running now but I removed the EA from all charts and restart the platform, put the EA again and insert Set file
I thought everything was going well, but is not the case. If the "breakeven" and "Jumping Stop" functions are enabled to true, all its settings appear to zero (see picture). I also notice that the EA is opening very few positions !!

Took me some time..
But It seems the EA is not initialized correctly. When using the Charts into alphabetical order scripts or indi.
A Manual Re-init of the EA, shows the right trading times.
And Break Even and TP settings.

(Without proper initialization this EA will not trade)
I did go manually to all the pairs to do a proper init. I am using build 765

Yes, the HTF could filter out a LOT of trades, sinces it is only looking at 2 signals.
It will filter out a lot with a low candle lookback.
The filter could be optimized to be less stressfull on resources.
But did'nt bother to do that yet. first see some results.

Corrected some typos.. 2x3 will be uploaded soon.

qvintus · Post by **qvintus** » Mon Mar 09, 2015 1:00 pm

Hi. I don't want to trade around rollover and has set a time for blocking this (local time) 20 minutes before and 10 minutes after rollover.

It has worked in older versions. This is the 2x3 version, with message that trading is outside trading times...

Post by **trader689** » Mon Mar 09, 2015 8:36 pm

im using currymonsters settings, can anyone tell me why EURNZD after a significant run down is not taking profits? ither pairs have hit tp in recent daus using same setfile and significantly smaller moves, why not eurnzd? theres are goldwave initial + multi trades from an EN short from 17th feb, please see screenshot:

bohgb EN.jpg

Post by **barry** » Tue Mar 10, 2015 1:27 am

trader689,
Are you really using cm's setfile? It has a 30 pip TP for GoldWave, but your screen shows no TP set.