HGIMatrix

greeny · Post by **greeny** » Sun May 10, 2015 3:57 pm

thanks renexxx .. nice tools..
i filtered 20 pair H4 & H1 with "show hurst" + "show only hurst"..
ha ha this give me very simple dan smart way to monitoring 40 chart
but it wonderfull if you can add some signal filtered like just show "big arrow" or "big arrow+rad" filtered

greeny · Post by **greeny** » Mon May 11, 2015 10:21 am

try to filtering 20 pair 3 TF (60 chart) with "use closed candle=false", "show most recent signal = false", "show hurst=true", "show only hurst=true"

alert triggered..

1.png

look at 4h chart

2.png

Post by **traderduke** » Mon May 11, 2015 12:51 pm

Renexxxx
I want to thank you for consolidating the great work of the SHF group. I thought I would provide this thread with one of my most consistent winning processes.

I use 31L, with HGI 17.00 & 2 sets of 10.7 Stochastic, one with the normal Current, Daily & weekly settings. The other 10.7 which I allowed TF inputs for TF’s relevant to the chart, i.e. H1 chart with a 10.7-Current, 240 & daily settings. The other indicator is just a feel good trending indicator.

My system although somewhat redundant to the HGI is:
1. I check the Matrix for combination of recent WAVE patterns that are consistent with H1 & H4.
2. I verify the 10.7’s are totally in sync with the HGI - H1 & H4.
3. I then use Steve’s script Holy Grail Wave Long or Short.
4. For less draw down I try to sync with the M15 but not allows.

That’s it. Short and sweet. This system allows me to sleep through the GBP opening.

Maybe some others can add their system I’m always looking for improvement

Thanks again Rene, you have taken all the mind blowing chart evaluating & reduced it to a flashing symbol.

Best regards
Ray

PS: Has any one seen a Holy Grail Wave script with a Stop loss? I'm using a MPTM at this time.

See attached screen shot.

seanb · Post by **seanb** » Fri May 15, 2015 2:22 am

Quick question I've been curious about.

Has the traders here used the Hurst Filter on time frames of 4H or more? If so, what strategy do you use?

Thanks in advance,

-Sean B

greeny · Post by **greeny** » Sat May 16, 2015 3:09 pm

seanb » Fri May 15, 2015 9:22 am wrote:Quick question I've been curious about.

Has the traders here used the Hurst Filter on time frames of 4H or more? If so, what strategy do you use?

Thanks in advance,

-Sean B

hi sean, i had trading few week with HGI+MAtrend+Hurst on EURUSD, but because that filter waiting valid signal very rare and boring..
thanks to matrix now i can monitoring 24 pair with easy so we had some valid signal everyday..

my startegy :
- use matrix in H4 and H1 : "showhurst=true", "showonlyhurst=true", "showmostrecentsignal=true", "maxbarlookback=1"
- on H4 take TREND,RAD,RANGE signal (MA and hurst valid)
- on H1 only take TREND, and RANGE signal (MA and hurst valid)
- when the valid signal occur i open related chart and "use Nitro5 prob meter H1" and wait the momentum when the prob meter >50% to open trade

- i use millenese simpleAPTM to manage the trade, use ATR=H4 for TP and SL and ATR=H1 for breakeven dan jumpSL

i had try this strategy about two weeks and its WIN...

cr1982 · Post by **cr1982** » Mon May 25, 2015 9:38 am

Hello renexxx, sorry for the dumb question

I am trying to center horizontally the matrix, but i am failing.

Symbol are displayed vertically and i am not able to have a complete overview of the chart.

cell widhth and height are already settled to my best way, but i have still the issue.

Any help?

Thanks

Post by **renexxxx** » Mon May 25, 2015 9:59 am

cr1982 » Mon May 25, 2015 7:38 pm wrote:Hello renexxx, sorry for the dumb question

I am trying to center horizontally the matrix, but i am failing.

Symbol are displayed vertically and i am not able to have a complete overview of the chart.

cell widhth and height are already settled to my best way, but i have still the issue.

Any help?

Thanks

There is a parameter ScreenHeight (default: 720). You may want to make this a bit smaller to fit your screen. The Matrix will keep adding new rows vertically, as long as the new row does not exceed the ScreenHeight value. Mind you, the Matrix will never center itself horizontally, that would involve the indicator acquiring the screen dimensions and although this can be done, problems arise when the screen is resized. I didn't want to go there.

cr1982 · Post by **cr1982** » Mon May 25, 2015 10:03 am

renexxxx » Mon May 25, 2015 9:59 am wrote:
cr1982 » Mon May 25, 2015 7:38 pm wrote:Hello renexxx, sorry for the dumb question

I am trying to center horizontally the matrix, but i am failing.

Symbol are displayed vertically and i am not able to have a complete overview of the chart.

cell widhth and height are already settled to my best way, but i have still the issue.

Any help?

Thanks
There is a parameter ScreenHeight (default: 720). You may want to make this a bit smaller to fit your screen. The Matrix will keep adding new rows vertically, as long as the new row does not exceed the ScreenHeight value.

Thanks Reneeexxx, i was reading the whole 3d to find a solution, but you have been faster.

I fixed setting ScreenHeight to 450.

piter44 · Post by **piter44** » Wed May 27, 2015 5:55 am

Hi,

Maybe stupid question but when I load HGIMatrixMTFv31L I have a message that HGI indicator expired.
I donwloaded latest versions from the 1st post.

This problem doesn't occur with non-L version.

BR,
Piter

Post by **renexxxx** » Wed May 27, 2015 7:30 am

piter44 » Wed May 27, 2015 3:55 pm wrote:Hi,

Maybe stupid question but when I load HGIMatrixMTFv31L I have a message that HGI indicator expired.
I donwloaded latest versions from the 1st post.

This problem doesn't occur with non-L version.

BR,
Piter

Hi Piter,

This question has already been answered in this Post.

Cheers ... Rene.