MADTrader

Post by **Wavegarrick** » Tue Apr 26, 2016 8:25 am

Hi White grid it seems you have not read the thread and the manual...

Your lookback minutes are set at 2880 minutes so it will only give and arrow and a highlight if you had price cross over your Ma in the last 2880 minutes so if you want to see an arrow you will have to set your lookback higher but remember this will put more load on your computer...

another thing is that you seem to be looking for an ma cross of 7 and 14 on the daily timeframe..this will be irrelevant because u have specified method for calculation as single line Ma so the highlight will only appear if the candle closes above the 14 Ma. and not after an Ma cross..

I suggest that you read through the manual Pdf that Rene posted on the first page...You will not be sorry

Tc

WhiteGrid · Post by **WhiteGrid** » Tue Apr 26, 2016 8:37 am

Wavegarrick » Tue Apr 26, 2016 9:25 am wrote:Hi White grid it seems you have not read the thread and the manual...

Your lookback minutes are set at 2880 minutes so it will only give and arrow and a highlight if you had price cross over your Ma in the last 2880 minutes so if you want to see an arrow you will have to set your lookback higher but remember this will put more load on your computer...

another thing is that you seem to be looking for an ma cross of 7 and 14 on the daily timeframe..this will be irrelevant because u have specified method for calculation as single line Ma so the highlight will only appear if the candle closes above the 14 Ma. and not after an Ma cross..

I suggest that you read through the manual Pdf that Rene posted on the first page...You will not be sorry

Tc

Thanks buddy, i've read the manual but interpreting every word is the magic :youknow:

Post by **Wavegarrick** » Tue Apr 26, 2016 8:44 am

So, why isn't my setfile showing so few arrows on D1 and as results it wont take any trades. When i exclude D1 it starts trading.
Can please someone help on this? i really would like to add D1 to the setfile too.

The Ea is not taking trades off the daily and the 4 hour timeframe because you have not specified them in the currency strength test...you have only specified 5 and 15 minutes so the ea will only trade off that...

WhiteGrid · Post by **WhiteGrid** » Tue Apr 26, 2016 8:53 am

Wavegarrick » Tue Apr 26, 2016 9:44 am wrote:
So, why isn't my setfile showing so few arrows on D1 and as results it wont take any trades. When i exclude D1 it starts trading.
Can please someone help on this? i really would like to add D1 to the setfile too.
The Ea is not taking trades off the daily and the 4 hour timeframe because you have not specified them in the currency strength test...you have only specified 5 and 15 minutes so the ea will only trade off that...

No D1 is excluded (as it wasnt showing arrows) but H4 is set to: At least 4 same signals. So it should be working in the currency strength, isnt it?
Which MA do you suggest for D1? I'm not an expert on MA's...

Post by **Wavegarrick** » Tue Apr 26, 2016 9:22 am

The arrows appear if you had a crossover at the close of the candle (Method for calulation = Ma crosover) or if u specified (Method for calculation = Ma single line) Candle must close above the Ma then arrow will appear for the timeframe specified..The symbol column will be highlighted if you have 4 arrows up or down on the t/frames specified in the currency strength check..If you have set it to 5 it will need 5 arrows...only then and only then will Mad trader 1.1 start looking for a trade..

You will have to use smaller Ma's on the daily if you want to trade in the intermediate term direction...6 and 12 Lwma set to open should be ok..

Hope this helps..
Tc

WhiteGrid · Post by **WhiteGrid** » Tue Apr 26, 2016 9:34 am

Wavegarrick » Tue Apr 26, 2016 10:22 am wrote:The arrows appear if you had a crossover at the close of the candle (Method for calulation = Ma crosover) or if u specified (Method for calculation = Ma single line) Candle must close above the Ma then arrow will appear for the timeframe specified..The symbol column will be highlighted if you have 4 arrows up or down on the t/frames specified in the currnecy strength check..If you have set it to 5 it will need 5 arrows...only then and only then will Mad trader 1.1 start looking for a trade..

You will have to use smaller Ma's on the daily if you want to trade in the intermediate term direction...6 and 12 Lwma set to open should be ok..

Hope this helps..
Tc

Many thanks!
What do you think about this setfile? any unlogic MA's in here?

Preciate your help!!!

Post by **Wavegarrick** » Tue Apr 26, 2016 10:02 am

Whitegrid I have done some minor tweaks on you settings..right now Gj is ready for a trade provided your conditions are met on Madtrader v 1.1 Ea...notice how I have included the daily time frame in the currency strength check with 4 same signals...I have also increased your lookback to 10080 so that you can at least get a trade for now...in the direction of the daily timeframe...at some stage you can decrease it again

WhiteGrid · Post by **WhiteGrid** » Tue Apr 26, 2016 10:08 am

Wavegarrick » Tue Apr 26, 2016 11:02 am wrote:Whitegrid I have done some minor tweaks on you settings..right now Gj is ready for a trade provided your conditions are met on Madtrader v 1.1 Ea...notice how I have included the daily time frame in the currency strength check with 4 same signals...I have also increased your lookback to 10080 so that you can at least get a trade for now...in the direction of the daily timeframe...at some stage you can decrease it again

Many thnks!

Post by **Wavegarrick** » Tue Apr 26, 2016 10:25 am

Here are my current settings for Maddy v1.7...Intraday swings happen nicely off these Ma's still infancy testing for me

These settings have proven nicely with Mad trader v1.1 (1 hour stochastics) and ( 15 min stochastics )

Anyway guys I welcome ideas and suggestions

Tc

Post by **Wavegarrick** » Tue Apr 26, 2016 10:30 am

I have no idea what I have just done Done

The above one did well with the 1 hour and 15 min stochs..

this is the one I am currently testing