@mw108
Come on there are a lot of work in this forum/indicator... Don't act like that simply because you've failed , again all this people deserves respect for everything that they are teaching us and giving it for free...
Basically don't be a cretin.....
HGI for beginners.
- PJSantos100
- Trader
- Posts: 16
- Joined: Sun Sep 04, 2016 4:36 am
- Location: Dubai but Portuguese :)
-
gdi
- Trader
- Posts: 13
- Joined: Wed Oct 12, 2016 2:53 pm
HGI for beginners.
Does anyone trade HGI full time?
It seems like there was a lot of excitement when it first came out but now all the HGI threads have died or slowed down dramatically. I cant find a single one that is active every day.
Did everyone find the holy grail and is keeping silent. Even if so people would still show setups and their results.
I would like to start a thread on here showing my trades in the 4H using the big arrow hoping it does not update too often. Just wondering if anyone else is still trading this and anyone using it full time?
Thank you my friends I hope to revive HGI and keep it going as long as people find it helpful.
It seems like there was a lot of excitement when it first came out but now all the HGI threads have died or slowed down dramatically. I cant find a single one that is active every day.
Did everyone find the holy grail and is keeping silent. Even if so people would still show setups and their results.
I would like to start a thread on here showing my trades in the 4H using the big arrow hoping it does not update too often. Just wondering if anyone else is still trading this and anyone using it full time?
Thank you my friends I hope to revive HGI and keep it going as long as people find it helpful.
- milanese
- TechAdmin
- Posts: 3293
- Joined: Wed Jan 09, 2013 9:02 am
- Location: btr rdx, r8 +
HGI for beginners.
many people use HGI every day and many EAs use HGI, the threads, we have, are for technical requests and due to that all this questions are made and responded, it is the logical consequence that there are not many new posts.gdi » Mon Oct 17, 2016 1:32 am wrote:Does anyone trade HGI full time?
It seems like there was a lot of excitement when it first came out but now all the HGI threads have died or slowed down dramatically. I cant find a single one that is active every day.
Did everyone find the holy grail and is keeping silent. Even if so people would still show setups and their results.
I would like to start a thread on here showing my trades in the 4H using the big arrow hoping it does not update too often. Just wondering if anyone else is still trading this and anyone using it full time?
Thank you my friends I hope to revive HGI and keep it going as long as people find it helpful.
Feel free to open your own topic to discuss your trading using HGI.
Cheers
Tommaso
Global Prime is the official SHF broker 
Searching for Servers and Workstations with individual configuration?
Just PM
Click here to go to the BoardKnowledgeBase
NOTE: Cookies and JavaScript are required for the using the board, with full functionality
Searching for Servers and Workstations with individual configuration?
Just PM
NOTE: Cookies and JavaScript are required for the using the board, with full functionality
-
gdi
- Trader
- Posts: 13
- Joined: Wed Oct 12, 2016 2:53 pm
HGI for beginners.
Sounds good thank you for the reply my friend.
God Bless!!
God Bless!!
-
chye
- Posts: 6
- Joined: Sun Feb 24, 2013 2:59 am
HGI for beginners.
Hello ,everyone!
First of all ,Thanks for all your efforts to make this wonderful indicators!
My English is very poor, so i want to post some pictures and questions to make myself to understand this indicator much better.
Thanks for all of you.
I like to trade in daily TF,so the picture below ,arrow after the blue wavy line would be my fist place buy into the trend?Can i buy into the trend just after the blue wavy line appears? sometimes we only get yellow wavy line,sometime we only get blue wavy line,why?
should i must trade into the trend after the blues wavy lines? or can i trade into the trend just after the yellow wavy lines? I'll appreciate if anyone help.
Anyway,thank you.
First of all ,Thanks for all your efforts to make this wonderful indicators!
My English is very poor, so i want to post some pictures and questions to make myself to understand this indicator much better.
Thanks for all of you.
I like to trade in daily TF,so the picture below ,arrow after the blue wavy line would be my fist place buy into the trend?Can i buy into the trend just after the blue wavy line appears? sometimes we only get yellow wavy line,sometime we only get blue wavy line,why?
should i must trade into the trend after the blues wavy lines? or can i trade into the trend just after the yellow wavy lines? I'll appreciate if anyone help.
Anyway,thank you.
You do not have the required permissions to view the files attached to this post.
-
birgibirba
- Posts: 3
- Joined: Mon Sep 12, 2016 7:25 pm
HGI for beginners.
Hello ,everyone!
I have a stupid question... can I use the HGI with commodities, like crude or natural gas?
I mean, it's safe? Cause on the manual it's all about forex...
I'm very sorry for the super stupid question
I have a stupid question... can I use the HGI with commodities, like crude or natural gas?
I mean, it's safe? Cause on the manual it's all about forex...
I'm very sorry for the super stupid question
-
afeudale
- Trader
- Posts: 59
- Joined: Mon Aug 08, 2016 1:23 pm
HGI for beginners.
You should wait for more seasoned veterans to chime in, but IMO, it shouldn't be a problem to use HGI for any trading.
Markets are markets and charts are charts. HGI is a technical indicator, so it analyses the P/A and spits out signals (quite good ones at that!) based on what it sees.
HGI doesn't know or care whether you are trading forex, oil, gold, pork rinds, etc.
Markets are markets and charts are charts. HGI is a technical indicator, so it analyses the P/A and spits out signals (quite good ones at that!) based on what it sees.
HGI doesn't know or care whether you are trading forex, oil, gold, pork rinds, etc.
- milanese
- TechAdmin
- Posts: 3293
- Joined: Wed Jan 09, 2013 9:02 am
- Location: btr rdx, r8 +
HGI for beginners.
yes you can, but make sure to have at least 550 bars for the instrument and tfbirgibirba » Thu Nov 17, 2016 2:24 pm wrote:Hello ,everyone!
I have a stupid question... can I use the HGI with commodities, like crude or natural gas?
I mean, it's safe? Cause on the manual it's all about forex...
I'm very sorry for the super stupid question
Cheers
Tommaso
Global Prime is the official SHF broker 
Searching for Servers and Workstations with individual configuration?
Just PM
Click here to go to the BoardKnowledgeBase
NOTE: Cookies and JavaScript are required for the using the board, with full functionality
Searching for Servers and Workstations with individual configuration?
Just PM
NOTE: Cookies and JavaScript are required for the using the board, with full functionality
-
birgibirba
- Posts: 3
- Joined: Mon Sep 12, 2016 7:25 pm
HGI for beginners.
Cool!
Thank you Tommaso!
PS right now, buy signal for WTI on H1
Thank you Tommaso!
PS right now, buy signal for WTI on H1
-
Sandy
- Trader
- Posts: 16
- Joined: Sun Apr 24, 2016 12:33 pm
HGI for beginners.
I am trying to develop a EA with hgi_lib and I feel this question is easy when knowing but I can't get a grip on it so therefore I ask my question here.
I want to act when TrendDn and Wavy Range Above comes according to my image.
And as far as I know I have access to this values or is it more somewhere?
enum SIGNAL {
NONE=0,
TRENDUP=1,
TRENDDN=2,
RANGEUP=3,
RANGEDN=4,
RADUP=5,
RADDN=6 };
enum SLOPE {
UNDEFINED=0,
RANGEABOVE=1,
RANGEBELOW=2,
TRENDABOVE=3,
TRENDBELOW=4 };
I have no drouble gett signals from TrendUp/Dn but the Wavy Range is a mystery. I thought this might do it but no if(theSignal == RANGEDN && theSlope == TRENDABOVE)
I want to act when TrendDn and Wavy Range Above comes according to my image.
And as far as I know I have access to this values or is it more somewhere?
enum SIGNAL {
NONE=0,
TRENDUP=1,
TRENDDN=2,
RANGEUP=3,
RANGEDN=4,
RADUP=5,
RADDN=6 };
enum SLOPE {
UNDEFINED=0,
RANGEABOVE=1,
RANGEBELOW=2,
TRENDABOVE=3,
TRENDBELOW=4 };
I have no drouble gett signals from TrendUp/Dn but the Wavy Range is a mystery. I thought this might do it but no if(theSignal == RANGEDN && theSlope == TRENDABOVE)
You do not have the required permissions to view the files attached to this post.