Awesome + SS version

pandaboy · Post by **pandaboy** » Thu May 10, 2018 1:50 pm

Hope this tiny tip may help some.. When you set the basket profit closure at 1%, set the daily profit to 0.9%. Once the basket closure starts closing the trades, it may not end up with 1% and new trades will start opening to fulfill the daily closure. This has helped me in last few days with only one basket a day.
I am running the same set as c1borg but "trade only positive swap" to false. If we are looking not to cross a day with the open trades, negative swap trades shouldn't be an issue, IMHO.

Post by **c1borg** » Thu May 10, 2018 3:11 pm

pandaboy » Thu May 10, 2018 1:50 pm wrote:Hope this tiny tip may help some.. When you set the basket profit closure at 1%, set the daily profit to 0.9%. Once the basket closure starts closing the trades, it may not end up with 1% and new trades will start opening to fulfill the daily closure. This has helped me in last few days with only one basket a day.
I am running the same set as c1borg but "trade only positive swap" to false. If we are looking not to cross a day with the open trades, negative swap trades shouldn't be an issue, IMHO.

Thanks for the suggested fix it actually happened to my V4 today and I was about to try and work out why.

Post by **wallywonka** » Fri May 11, 2018 12:49 am

I'm testing out a 3SS version that I made...I am not sure if there will be a benefit to having 3 superslopes or not but I'm testing it out with higher timeframes currently.

Post by **c1borg** » Sat May 12, 2018 2:24 pm

Another winning week for V3 I wonder what the odds are of having 36 winning trades in a row and no losses? My demo is now reaching the first £1000 in balance so things might get interesting with the relationship between the target (is it achievable) and trades/dollop. Who knows how much the target can be per day without bringing in losses, I picked 1% out of the air but could it make 2,3 or even 5% without breaking?

I have abandoned my V4 which had Peaky turned on with a low timeframe, but my V5 seems to be doing better with recovery turned on using Billy's suggested settings of 1 2 20 0". I have also adjusted my daily profit to 0.9% as described by Pandaboy above

Other news is Walywonka has come up with a 3SS version with adjusted Flying Bhudda code which im going to try.

pandaboy · Post by **pandaboy** » Sat May 12, 2018 5:08 pm

c1borg » Sat May 12, 2018 9:24 am wrote:Another winning week for V3 I wonder what the odds are of having 36 winning trades in a row and no losses? My demo is now reaching the first £1000 in balance so things might get interesting with the relationship between the target (is it achievable) and trades/dollop. Who knows how much the target can be per day without bringing in losses, I picked 1% out of the air but could it make 2,3 or even 5% without breaking?

I have abandoned my V4 which had Peaky turned on with a low timeframe, but my V5 seems to be doing better with recovery turned on using Billy's suggested settings of 1 2 20 0". I have also adjusted my daily profit to 0.9% as described by Pandaboy above

Other news is Walywonka has come up with a 3SS version with adjusted Flying Bhudda code which im going to try.

just for fun.. think about 10% a day and 36 days.. 1000$ will be 30,912$ with compounding...

Post by **Gertje** » Sat May 12, 2018 10:11 pm

pandaboy » Sat May 12, 2018 5:08 pm wrote: just for fun.. think about 10% a day and 36 days.. 1000$ will be 30,912$ with compounding...

Why stop there?

Post by **wallywonka** » Sun May 13, 2018 5:35 am

c1borg » Sat May 12, 2018 2:24 pm wrote: Other news is Walywonka has come up with a 3SS version with adjusted Flying Bhudda code which im going to try.

Yes I I'm testing a Higher timeframe range (1W, 1D, 4H) and also a lower timeframe range (1H, 30M, 15M) to see if there any any benefits or not...

For those that have been testing this on multiple terminals you'll have also noticed the flying buddha symbols did not match, I also fixed this in addition to adding a 3rd Superslope timeframe so you'll now get the same FB signals across multiple terminals as it should be.

I did run this on a live account last week with positive results.

Cheers Wally

Post by **isabek** » Sun May 13, 2018 8:07 am

Hi Wally.

Can you please post here changed code for FB?

Thank you.

Post by **wallywonka** » Sun May 13, 2018 2:02 pm

isabek » Sun May 13, 2018 8:07 am wrote:Hi Wally.

Can you please post here changed code for FB?

Thank you.

I've just sent it to c1borg to test it and make sure it's working correctly and then he can post it in the thread.

Post by **c1borg** » Sun May 13, 2018 7:31 pm

wallywonka » Sun May 13, 2018 2:02 pm wrote:
I've just sent it to c1borg to test it and make sure it's working correctly and then he can post it in the thread.

Thanks Wallywonka your version is in post 1 for everyone to test :hi:

Looks like you've also added Letsarbs Gann code is that correct?