TDesk Discussion

Post by **tomele** » Fri Dec 14, 2018 9:33 am

Hi guys.

Yes, I am working on TDesk 5 that will provide this feature. Please be patient as I have very limited time at the moment.

Cheers
Thomas

Post by **rapple** » Fri Dec 14, 2018 10:36 am

tomele » Fri Dec 14, 2018 7:33 pm wrote:Hi guys.

Yes, I am working on TDesk 5 that will provide this feature. Please be patient as I have very limited time at the moment.

Cheers
Thomas

No problem Thomas

We all appreciate all your help

Cheers Richard

Post by **kwchau** » Fri Dec 14, 2018 10:40 am

tomele » Fri Dec 14, 2018 5:33 pm wrote:Hi guys.

Yes, I am working on TDesk 5 that will provide this feature. Please be patient as I have very limited time at the moment.

Cheers
Thomas

Dear Thomas,

No hurry, you have done so much for us, really appreciate !

Thank you so much,
kwchau

Post by **Wavegarrick** » Fri Dec 14, 2018 3:41 pm

Yes, I am working on TDesk 5 that will provide this feature. Please be patient as I have very limited time at the moment.

My thought process goes wild with this possibility and opens up a whole new scope of controls and things to throw into the mix.

Thanks Thomas. Take your time.

Cheers
Leon

Post by **nwesterhuijs** » Tue Dec 18, 2018 12:42 pm

tomele » Fri Dec 14, 2018 9:33 am wrote:Hi guys.

Yes, I am working on TDesk 5 that will provide this feature. Please be patient as I have very limited time at the moment.

Cheers
Thomas

I am testing a setup whereby this is incorporated in the indicators, not TDESK. In the indicator I have added the options asTDEntrySignal and asTDExitSignal. The idea is that if asTDEntrySignal=T and asTDExitSignal=F the indicator stops sending a signal to TDESK once a trade has opened. This also allows one to use a indicator purely for exiting trades.

Attached is an example I am still testing, but I currently have too limited time to really debug and test it properly. Given the topic I am jumping the gun before having test results, sorry.

The attached file compares the price to an average, allowing one to implement the 64/240 LWMA of Bob rule or other strat that uses the price level (can be select what of the bar needs to be above of below the MA) above or below an MA.

Additionally, I have added EntryPerCycle (make this one 1,000,000), since it would allow the number of entries once the condition is met. For example I am using this in the MAcross, whereby I only want Desky to enter 1 trade upon cross of MA's. Once MA's have crossed I get a signal and as soon as a trade has opened the signal goes flat. Upon cross the other way it is reset. Hope the idea I am trying to implement is clear. Maybe there is a smarter way, but this was my shot at it, since it is often that you do not rely on the same indies to enter a trade to exit a trade.

Cheers,

Norbert

Dragonian · Post by **Dragonian** » Wed Jan 02, 2019 5:14 am

Hello Thomas,

The total for the "Sum UPL in Pips" column appears to be showing the actual total for the "Sum UPL in USD" column and that total is blank.

TDesk 1.png

Post by **c1borg** » Wed Jan 02, 2019 5:25 am

Mine seems ok

Capture.PNG

Dragonian · Post by **Dragonian** » Wed Jan 02, 2019 5:50 am

Perhaps my settings have upset something, I'll try different settings tomorrow. It's the same on two different accounts, both GP, though.

ParFour · Post by **ParFour** » Wed Jan 02, 2019 1:05 pm

Dragonian » Wed Jan 02, 2019 5:14 am wrote:Hello Thomas,

The total for the "Sum UPL in Pips" column appears to be showing the actual total for the "Sum UPL in USD" column and that total is blank.

Agreed, although mine is in GBP, for what its worth. Expanding the column detail provides a little more insight to the issue I hope.

Dragonian · Post by **Dragonian** » Wed Jan 02, 2019 1:10 pm

Dragonian » 02 Jan 2019 06:50 wrote:Perhaps my settings have upset something, I'll try different settings tomorrow. It's the same on two different accounts, both GP, though.

It would appear that setting "ShowPendingColumn" to false is causing this to happen.