TDesk Whispers

Post by **taipan** » Fri Mar 22, 2019 11:25 pm

tomele » Sat Mar 23, 2019 7:06 am wrote:Give it PIN #1

Do you mean set the pin#1 in the indicator. I did that and no response from Tdesk and it just freezed?

Post by **tomele** » Fri Mar 22, 2019 11:26 pm

Yes, I meant to set the indicator PIN to 1. You must reload TDesk (twice, since you will get an error on first time) after that.

Post by **taipan** » Fri Mar 22, 2019 11:30 pm

tomele » Sat Mar 23, 2019 7:26 am wrote:Yes, I meant to set the indicator PIN to 1. You must reload TDesk (twice, since you will get an error on first time) after that.

Yes, it now worked. Thanks.

Post by **tomele** » Fri Mar 22, 2019 11:35 pm

Well spotted error.

I will overwork the code and amend the explanations.

Cheers
Thomas

Post by **tomele** » Sun Mar 24, 2019 1:49 pm

Hi @all.

TDesk 6.01 is in post 1. There is also a new version of TDeskSignals.mqh that you must use to compile Desky.

I have marked red all changes in the update notes. Please read them thoroughly. Some inputs have changed, so save your settings to a setfile before upgrading. If you use EAX-PINs, read about the descriptors and change your settings accordingly.

Have fun. I do.

Cheers
Thomas

Post by **kwchau** » Sun Mar 24, 2019 2:14 pm

tomele » Sun Mar 24, 2019 9:49 pm wrote:Hi @all.

TDesk 6.01 is in post 1. There is also a new version of TDeskSignals.mqh that you must use to compile Desky.

I have marked red all changes in the update notes. Please read them thoroughly. Some inputs have changed, so save your settings to a setfile before upgrading. If you use EAX-PINs, read about the descriptors and change your settings accordingly.

Have fun. I do.

Cheers
Thomas

Wow ! Thomas, these new additions are really mind boggling and powerful, the flexibility is endless. Just wonder I have enough time to learn and test all things out. You are amazing ! Genius works !

cheers,
kwchau

Post by **tomele** » Mon Mar 25, 2019 2:52 pm

Hi @all.

TDesk 6.02 as well as an improved TDeskSignals.mqh are in post 1.

* Refined veto/exit logic
* Exits are solely based on net lot size now
* Enhanced dashboard display details

This should be near to final state. How are your tests going?

Cheers
Thomas

Dragonian · Post by **Dragonian** » Mon Mar 25, 2019 3:48 pm

tomele » 25 Mar 2019 14:52 wrote:Hi @all.

TDesk 6.02 as well as an improved TDeskSignals.mqh are in post 1.
................................... How are your tests going?

Cheers
Thomas

Tests going well so far Thomas, everything seems to be working as it should. Experimenting with some pins at the moment trying to duplicate my manual trading.

Excellent work on your part, thank you :hi:

Post by **rapple** » Mon Mar 25, 2019 9:58 pm

Dear Thomas

I am running 6.02 and experimenting with VETO

In the attached example I would like to setup VETO on the first RSI-X column only but when I enter RSI-X/D1 into the VETO Setfile both RSI columns are selected.

Would it be possible to setup TDesk so we can distinguish between these columns with the same name?

Maybe RSI-X1 and RSI-X2

Thanks Richard

Post by **tomele** » Mon Mar 25, 2019 10:03 pm

You are using two RSIs on D1 with different settings?