Hopelessly confused by TDesk or Desky? Ask here.

Post by **SteveHopwood** » Sun Aug 11, 2019 8:48 pm

lamdog330 » Sun Aug 11, 2019 8:41 pm wrote:For the Unpeaky Bob, "This is SLP without Peaky, so read SPB's user guide for info about all the other inputs." What is the SLP stand for?

That was a typo. I will correct it. I meant SPB.

Post by **bodavid** » Sun Aug 11, 2019 9:03 pm

traderduke » Mon Aug 12, 2019 2:21 am wrote:Help!
I can't get the TDesk to read or show my newly converted TD indicator, it compiles and shows on the data window correctly. this ind is not a MTF so Line 200 maybe part of the problem.
Ray

Hi,
Here is an identical version with UBD setfile. smFisherTransform3_impr by bodavid
Cheers,
Ben

Post by **traderduke** » Mon Aug 12, 2019 12:27 pm

Ben
Thanks a lot it works great!
Ray

Mankigdom · Post by **Mankigdom** » Tue Aug 27, 2019 6:09 pm

Hello and thanks for allowing us to play with this lovely systems and tools. I am really enjoying the challenge.

On page 6 of Taipan's Super Trend Setup another newbie got kneecapped, I noticed that he did had signals on his TDesk dashboard, I can't even get those, I got to be worse with this setup so I don't want to annoy anyone over there, am not brave enough.

I have a setup running live, smoothly on another account with Baluda SS TD v2 and RSI TD V2. Here I have been trying to demo Taipan's setup on two demos now, deleting one Empty4 and opening another. Also tried the other tricks of clearing Global variables and delete mqlcache ect.

I followed everything in Taipan's 1st post from 22rd August 2019 post downwards, all steps and rechecked my downloaded files from the forum and the included zip files. My setup looks exactly identical all 4 charts except that on my TDesk v6.81 chart there are no signals except what it shows which seems to be there no matter what I do, allways on the same pair, same direction, same time. My TDesk version however is V6.81, his is v6.8, could this be one of my problem, V6.8 is no longer available though. TDesk 6.81 is in my Expert folder, when I load his TDesk v6.8 EA template with PeakyBuffers 28pairs, it opens as the v6.81. didn't see this as a problem for what was updated in TDesk V6.81

The only signals I would get there is if I added my Baluda SS TD v2 and RSI 2MA TD v2, I took those off.
TDesk "Detected" says that the segnals detected but none shows on the dashboard.TDesk EA is running normal.

Can't yet figure what am doing wrong with these Drones but am keeping trying, hoping to get a grip on where I have messed up. Working at it in the meantime.

Thanking You
Regards
Md

Post by **tomele** » Tue Aug 27, 2019 6:41 pm

Reduce the TDesk font size instead of scaling up or down until we can identify anything

Post by **taipan** » Wed Aug 28, 2019 12:22 am

Mankigdom » Wed Aug 28, 2019 2:09 am wrote:Hello and thanks for allowing us to play with this lovely systems and tools. I am really enjoying the challenge.

On page 6 of Taipan's Super Trend Setup another newbie got kneecapped, I noticed that he did had signals on his TDesk dashboard, I can't even get those, I got to be worse with this setup so I don't want to annoy anyone over there, am not brave enough.

I have a setup running live, smoothly on another account with Baluda SS TD v2 and RSI TD V2. Here I have been trying to demo Taipan's setup on two demos now, deleting one Empty4 and opening another. Also tried the other tricks of clearing Global variables and delete mqlcache ect.

I followed everything in Taipan's 1st post from 22rd August 2019 post downwards, all steps and rechecked my downloaded files from the forum and the included zip files. My setup looks exactly identical all 4 charts except that on my TDesk v6.81 chart there are no signals except what it shows which seems to be there no matter what I do, allways on the same pair, same direction, same time. My TDesk version however is V6.81, his is v6.8, could this be one of my problem, V6.8 is no longer available though. TDesk 6.81 is in my Expert folder, when I load his TDesk v6.8 EA template with PeakyBuffers 28pairs, it opens as the v6.81. didn't see this as a problem for what was updated in TDesk V6.81

The only signals I would get there is if I added my Baluda SS TD v2 and RSI 2MA TD v2, I took those off.
TDesk "Detected" says that the segnals detected but none shows on the dashboard.TDesk EA is running normal.

Can't yet figure what am doing wrong with these Drones but am keeping trying, hoping to get a grip on where I have messed up. Working at it in the meantime.

Thanking You
Regards
Md

When you install a new Empty4, did you download enough History? May be your platform is lack of history, that is why my setup is not working. Copy the attached GetAllSymbol EA into experts folder and click and refresh in the Navigator windows. Then load it to chart (any charts).

GetHistoryAllSymbols.mq4

Mankigdom · Post by **Mankigdom** » Wed Aug 28, 2019 2:04 am

Thank You Thomas, thank you Taipan

I have only used the script "ForceLoadHistoricalData" whenever I open a new platform.
Am running this GetHistoryAllSymbols expert now and would try my setup again later.

Thanks very much again I appreciate your time
Md

Post by **c1borg** » Wed Aug 28, 2019 8:20 am

Can anyone explain why this occurs? Using Desky version t.

2019.08.28 11:00:56.869 Notifications: 'order #131546669 buy 0.01 EURAUD at 1.65880 closed at price 1.64501, so: 100.0%/960.2/960.5, profit: -13.79 AUD'

I have searched the attached Desky setfile for anything set to true that might cause this but stumped?

If you need any more info let me know. :youknow:

Post by **Vokin** » Wed Aug 28, 2019 8:33 am

c1borg » Wed Aug 28, 2019 9:20 am wrote:Can anyone explain why this occurs? Using Desky version t.

2019.08.28 11:00:56.869 Notifications: 'order #131546669 buy 0.01 EURAUD at 1.65880 closed at price 1.64501, so: 100.0%/960.2/960.5, profit: -13.79 AUD'
I have searched the attached Desky setfile for anything set to true that might cause this but stumped? If you need any more info let me know. :youknow:

Who has not yet known this situation is a happy man.
Margin Call.......

Post by **c1borg** » Wed Aug 28, 2019 8:52 am

Vokin » Wed Aug 28, 2019 8:33 am wrote:
Who has not yet known this situation is a happy man.
Margin Call.......

Been a long day

thanks

Might be the news that UK could suspend parliament, very unusual and rocky times in the markets one thing after another

Edit: For some reason I have ForexKiwi and Zeljko set to False, both corrected. :youknow: