SuperSlope Zero Line Indicator

Post by **sukesuke** » Thu Oct 28, 2021 1:23 pm

Hi guys,

I created an indicator to draw the level line of the super slope in the chart window.

・ Gold color line (zero line) = greater than the level, cross-up.
・ Gold color line (zero line) = greater than the level, cross-down.
・ White color line (zero line) = less than the level.
・ Gold color dotted line (level line).
・ level cross alert.
・ level cross arrow or reverse arrows
(In the case of mtf, when the level crosses, a signal is displayed on that candlestick).
・ MTF (auto higher timeframe).
・ Drawing Timing = On Tick or On Timer.

2021.11.09 ver 1.00 release.
2021.11.09 ver 1.01 Bug fixes case maxBars > Bars.
2021.11.09 ver 1.01 The alert function has stopped.
2021.11.10 ver 1.02 Bug fixes get close count.
2021.11.11 ver 1.03 The alert function is working.
2021.11.15 ver 1.04 Bug fixes MTF function.
2021.11.15 ver 1.04 Output the reason why the line is not drawn to the expert log.
2021.11.15 ver 1.04 Changed the default value.
2021.11.15 ver 1.04 Select drawing timing.
2021.11.19 ver 1.05 Bug fixes Gold line does not redraw.
2022.01.03 ver 1.10 Draw level line.
2022.01.08 ver 1.20 The color of the line is strong / weak level or cross-up / down.
2022.01.14 ver 1.40
- Added a function to drawing timing, Read the bar every X seconds.
The drawing interval can be set for on timer function.
Target parameters => General Inputs (DrawingTiming, IntervalSeconds).
- When the arrow is above the level,
it will be displayed in the direction beyond,
but the added function will be displayed in the opposite direction.
If "true", the exit arrow is not displayed.
Target parameters => Arrow Display (ShowArrowsReverse).
- In the case of mtf, when the level crosses,
a signal is displayed on that candlestick.
Target parameters => General Inputs (MtfCurrentTfUpdate).
- "slopeBuffer" to indicator buffer.
- Added a function to auto higher timeframe. "NumberTFtoJump" higher timeframe.
If "true", "UserTimeFrame" unavailable.
Target parameters => General Inputs (AutoHigherTF, NumberTFtoJump).
　

society · Post by **society** » Mon Nov 08, 2021 8:22 pm

I dont think I can PM a screen shot
basically I have it on a 4hr setting on a 1 hour chart.
do the exit cross alerts work? I am not sure. Thanks!

Post by **sukesuke** » Tue Nov 09, 2021 2:33 am

Fixed a bug in the MTF function.
The alert function was not working properly.
The alert function has been stopped because it takes time to fix.

society · Post by **society** » Tue Nov 09, 2021 12:14 pm

Thanks!
I think all the old baluda slopes have an alert issue
they either work for the cross or for the level cross, but not both
2.5 works for the level cross and 2.0-2.2 works for the cross, hope that helps with your coding
thanks again

and the mtf is still not working for some reason
the 4hr will show up on the 1min and 5min not anything else until the 4hr and higher
daily wont show up on the 4hr or 1hr but will show up on the 30, 15 and 5
i think it might be due to a remnant in the code from the image

Post by **sukesuke** » Tue Nov 09, 2021 11:37 pm

I'm sorry.
I think that the error log is output.
Can you give me an expert log?

society · Post by **society** » Tue Nov 09, 2021 11:57 pm

SuperSlopeZeroLine (1) GBPCHF.FX,H1: array out of range in 'SuperSlopeZeroLine (1).mq4' (267,33)

this is with indi set to 4hr on 1hr chart
same error set to daily on 4hr

Post by **sukesuke** » Wed Nov 10, 2021 4:25 am

I'm sorry again.
It will not be reproduced in my environment, so it will only be checked on the desk.
Thank you.

Johnnyslt · Post by **Johnnyslt** » Wed Nov 10, 2021 6:19 pm

Hi,

Thank you for the indicator. I'll test it out and let you know.

Post by **sukesuke** » Wed Nov 10, 2021 11:35 pm

The alert function is working.
Thank you.

Johnnyslt · Post by **Johnnyslt** » Thu Nov 11, 2021 4:06 pm

Yes they are.

Thanks for it !