Bears'n'Bulls EA - V1.05g - in forward- & live-test

Post Reply
User avatar
Wiggy1965
Trader
Posts: 326
Joined: Fri Jan 04, 2013 11:58 am
Location: Melbourne - Australia

Re: Bears'n'Bulls EA - actual version V1.04a - stable

Post by Wiggy1965 »

banzak wrote:
Wiggy1965 wrote:OK, I have the EA running on Pound and Euro, should it have traded today....? as i have no trades...?
On my demo at HotForex, you can take a look at my signature, there was a trade today on EURUSD and yesterday on GBPUSD. I will post my setfiles later when I'm coming home.

I have the BnB EMA_v02 indicator running on a 1H Euro charge and it does have a down arrow at 12:00 (GMT +2) is this a trade indication that the EA should have picked up on...?
This indicator is only a guide if you are trying to understand what the robot is doing. The signals are not the same, cause I'm not programming all of the changes also in the indicator. The arrows are only for help with manual trading. Also the Bulls&Bears are only a guide, cause I implemented all indicator direct to the EA.
Just to be clear, i have the EA running on both a 15M Pound and Euro charts, no other indicators, apart from a Exposure indicator...I then have just a standalone chart described above with the BnB_EMA_v02 indi and a Bears and Bulls indicator, just to try and understand what the trade setup looks like...
I'm on a manual to describe how to manage to get a setfile. There I try to describe whats in my head and the EA for all to better understand what's going on. :)

Yes, this sounds impossible, but I'm trying it.. ;)

Does the above seem or, what am i missing...?
Oh, i have attached the SET file....
My broker (Crim) is FXTG and i have a 10k demo ECN account...
Thanks again Banzak...
Regards
Wiggy
On the weekend I will take a look at your setfile and give it a run, when I have something I will post it here.

Regards,
Banzak
Thanks Banzak,

I look forward to your email....

Could you just confirm one thing, i only need the ea on the chart, nothing else....

Regards
Wiggy
User avatar
banzak
Trader
Posts: 79
Joined: Thu Dec 13, 2012 1:54 pm
Location: Zgorzelec / Poland

Re: Bears'n'Bulls EA - actual version V1.04a - stable

Post by banzak »

Wiggy1965 wrote: Thanks Banzak,
I look forward to your email....
Could you just confirm one thing, i only need the ea on the chart, nothing else....
Regards
Wiggy
Hi Wiggy,
yes you only need the EA.


Regards,
Banzak
_________________________________________________________________________
It is better to go on a new path to mislead than to follow the mass on the right track.
User avatar
Wiggy1965
Trader
Posts: 326
Joined: Fri Jan 04, 2013 11:58 am
Location: Melbourne - Australia

Re: Bears'n'Bulls EA - actual version V1.04a - stable

Post by Wiggy1965 »

Hi Banzak,

After no activity with the EA for a week, i have finally been put in the EURUSD long @ 00:01 (GMT +2) and then again at 00:45 (GMT +2)....Both on the 6-2-2013...

Is normal for the EA and did you get these trades.....?

Regards
Wiggy
User avatar
Wiggy1965
Trader
Posts: 326
Joined: Fri Jan 04, 2013 11:58 am
Location: Melbourne - Australia

Re: Bears'n'Bulls EA - actual version V1.04a - stable

Post by Wiggy1965 »

Hi Banzak,

Further to the above, the EA is taking more trades, see below pic....

Is the EA in trouble, should it be doing this...? Should i disable it...?
bears'n'bulls_EURUSD Trades 6-3-3013 pic2.jpg
Regards
Wiggy
You do not have the required permissions to view the files attached to this post.
User avatar
banzak
Trader
Posts: 79
Joined: Thu Dec 13, 2012 1:54 pm
Location: Zgorzelec / Poland

Re: Bears'n'Bulls EA - actual version V1.04a - stable

Post by banzak »

Wiggy1965 wrote:Hi Banzak,

Further to the above, the EA is taking more trades, see below pic....

Is the EA in trouble, should it be doing this...? Should i disable it...?
bears'n'bulls_EURUSD Trades 6-3-3013 pic2.jpg
Regards
Wiggy
Did you use my setfile i sent to you? Cause in my setfile trades are only allowed form 08:00 to 22:00...
Are you running the robot on the M5-Timeframe? It's supposed to run in M15.

Regards,
Banzak
_________________________________________________________________________
It is better to go on a new path to mislead than to follow the mass on the right track.
User avatar
Wiggy1965
Trader
Posts: 326
Joined: Fri Jan 04, 2013 11:58 am
Location: Melbourne - Australia

Re: Bears'n'Bulls EA - actual version V1.04a - stable

Post by Wiggy1965 »

banzak wrote:
Wiggy1965 wrote:Hi Banzak,

Further to the above, the EA is taking more trades, see below pic....

Is the EA in trouble, should it be doing this...? Should i disable it...?
bears'n'bulls_EURUSD Trades 6-3-3013 pic2.jpg
Regards
Wiggy
Did you use my setfile i sent to you? Cause in my setfile trades are only allowed form 08:00 to 22:00...
Are you running the robot on the M5-Timeframe? It's supposed to run in M15.

Regards,
Banzak
Hi Banzak,

I used the set file as provided apart from allowing it to trade 24x7, i just wanted some action.....!...I also have the EA running on a GBPUSD and EURUSD 15M charts....

Will the time frame have such a dramatic impact on the number of trades open, as i now have a number of Pound orders open also....!

Wiggy
User avatar
ovisun
Trader
Posts: 63
Joined: Sun Mar 18, 2012 11:54 am
Location: Romania, Constanta

Re: Bears'n'Bulls EA - actual version V1.04a - stable

Post by ovisun »

Hi banzak,

Could you make an option in money management to close basket at equity profit percent?
I already use this option on another chart with MPTM, but would be better to be included in your EA.

Thanks
Image
User avatar
banzak
Trader
Posts: 79
Joined: Thu Dec 13, 2012 1:54 pm
Location: Zgorzelec / Poland

Re: Bears'n'Bulls EA - actual version V1.04a - stable

Post by banzak »

ovisun wrote:Hi banzak,

Could you make an option in money management to close basket at equity profit percent?
I already use this option on another chart with MPTM, but would be better to be included in your EA.

Thanks
Hi ovisun,
yes I had this option in a earlier version. I will put it in the next release.

Regards,
Banzak
_________________________________________________________________________
It is better to go on a new path to mislead than to follow the mass on the right track.
User avatar
banzak
Trader
Posts: 79
Joined: Thu Dec 13, 2012 1:54 pm
Location: Zgorzelec / Poland

Re: Bears'n'Bulls EA - actual version V1.04a - stable

Post by banzak »

Wiggy1965 wrote: Hi Banzak,
I used the set file as provided apart from allowing it to trade 24x7, i just wanted some action.....!...I also have the EA running on a GBPUSD and EURUSD 15M charts....
Will the time frame have such a dramatic impact on the number of trades open, as i now have a number of Pound orders open also....!
Wiggy
Yes it has a dramatic impact when you change the timeframe, cause the indicator depend on them.
Some indicators have no hardcoded timeframe, so it changes the decision when you change.

To get the ea working in eg. m5 you have to make a backtest for that.

Regards,
Banzak
_________________________________________________________________________
It is better to go on a new path to mislead than to follow the mass on the right track.
User avatar
Wiggy1965
Trader
Posts: 326
Joined: Fri Jan 04, 2013 11:58 am
Location: Melbourne - Australia

Re: Bears'n'Bulls EA - actual version V1.04a - stable

Post by Wiggy1965 »

banzak wrote:
Wiggy1965 wrote: Hi Banzak,
I used the set file as provided apart from allowing it to trade 24x7, i just wanted some action.....!...I also have the EA running on a GBPUSD and EURUSD 15M charts....
Will the time frame have such a dramatic impact on the number of trades open, as i now have a number of Pound orders open also....!
Wiggy
Yes it has a dramatic impact when you change the timeframe, cause the indicator depend on them.
Some indicators have no hardcoded timeframe, so it changes the decision when you change.

To get the ea working in eg. m5 you have to make a backtest for that.

Regards,
Banzak
Ok, I'll adjust the times, now that i know it will place a trade...;-)

Wiggy
Post Reply

Return to “Automated trading systems”