10.4 A Complete System

[art]

ive just got the stoch ( 5 3 3) on top of the AO, but youve explained it thats fine

[fahedksa]

Hi Bob,
Since two years i am follow your works and i am very greatful for that kind of help.
For me i used the strategy Wed-Fri result 9 Trades ,All wining trades , 500 Pips
Thank you again

[lhDT]

Hi guys,

The dashbard dev is almost done.
Puropose is to scan tons of pairs easily instead of clicking (or opening) a chart every 4 hours to look for a setup.

At first, I wanted to also set the nearest weekly supp/resistance lvl, pips distance etc ... but I finally gave up because the basic idea is to receive an alert WHEN something is happening, once received you have plenty of time to open the chart and check by yourself.

For the alerts, you will have the basic sound alert and a mobile alert (easy for traders who place this on a VPS, that's how I do).
Oh yes, I'm using the STOC instead of RSI2 for two reasons. First is it less cpu intensive (better when scanning a shitload of pairs) and second, it's much much much easier to code.

AS i'm still coding this, I would be glad to have your comments.

Lio

PS : At the right side it's the NB-i Breakeven indicator, nothing to do with the dash.

[erikskenne]

Hi guys,

The dashbard dev is almost done.
Puropose is to scan tons of pairs easily instead of clicking (or opening) a chart every 4 hours to look for a setup.

At first, I wanted to also set the nearest weekly supp/resistance lvl, pips distance etc ... but I finally gave up because the basic idea is to receive an alert WHEN something is happening, once received you have plenty of time to open the chart and check by yourself.

For the alerts, you will have the basic sound alert and a mobile alert (easy for traders who place this on a VPS, that's how I do).
Oh yes, I'm using the STOC instead of RSI2 for two reasons. First is it less cpu intensive (better when scanning a shitload of pairs) and second, it's much much much easier to code.

AS i'm still coding this, I would be glad to have your comments.

Lio

PS : At the right side it's the NB-i Breakeven indicator, nothing to do with the dash.

Hi

I think this can be a handy tool,

[theforexedge]

[quote="lhDT"]Hi guys,

The dashbard dev is almost done.
Puropose is to scan tons of pairs easily instead of clicking (or opening) a chart every 4 hours to look for a setup.

At first, I wanted to also set the nearest weekly supp/resistance lvl, pips distance etc ... but I finally gave up because the basic idea is to receive an alert WHEN something is happening, once received you have plenty of time to open the chart and check by yourself.

For the alerts, you will have the basic sound alert and a mobile alert (easy for traders who place this on a VPS, that's how I do).
Oh yes, I'm using the STOC instead of RSI2 for two reasons. First is it less cpu intensive (better when scanning a shitload of pairs) and second, it's much much much easier to code.

AS i'm still coding this, I would be glad to have your comments.

lhDT

I posted on Steve's thread a request to code the following, so hope you can add this to the dashboard imdi..

1. 240MA Cross - Indicate Buy or Sell Trend Change Alert
2. 240MA Above (Buy) / RSI Flat line 0 / Awesome Oscillator Green - Buy Alert
240MA Below (Sell) / RSI Flat Line 100 / Awesome Oscillator Red - Sell Alert
3 240MA Above (Buy) / RSI Flat line 100 / Awesome Oscillator Red - Trade Exit Alert
240MA Below (Sell) / RSI Flat Line 0 / Awesome Oscillator Green - Trade Exit Alert

Thanks, JP

[xrismak]

Hi guys,

The dashbard dev is almost done.
Puropose is to scan tons of pairs easily instead of clicking (or opening) a chart every 4 hours to look for a setup.

At first, I wanted to also set the nearest weekly supp/resistance lvl, pips distance etc ... but I finally gave up because the basic idea is to receive an alert WHEN something is happening, once received you have plenty of time to open the chart and check by yourself.

For the alerts, you will have the basic sound alert and a mobile alert (easy for traders who place this on a VPS, that's how I do).
Oh yes, I'm using the STOC instead of RSI2 for two reasons. First is it less cpu intensive (better when scanning a shitload of pairs) and second, it's much much much easier to code.

AS i'm still coding this, I would be glad to have your comments.

lhDT

I posted on Steve's thread a request to code the following, so hope you can add this to the dashboard imdi..

1. 240MA Cross - Indicate Buy or Sell Trend Change Alert
2. 240MA Above (Buy) / RSI Flat line 0 / Awesome Oscillator Green - Buy Alert
240MA Below (Sell) / RSI Flat Line 100 / Awesome Oscillator Red - Sell Alert
3 240MA Above (Buy) / RSI Flat line 100 / Awesome Oscillator Red - Trade Exit Alert
240MA Below (Sell) / RSI Flat Line 0 / Awesome Oscillator Green - Trade Exit Alert

Thanks, JP

Hi TheFxEdge,
I think these Addittions will more than make the Gizmo as in the Dashboard a Charriot... something of a Runaway Success for traders who are away from their PCs most of the time, Very Good Idea...

Happy Trading Y'all,
xrismak

[rebyte2]

G'Day Chaps....

I have on my radar, the following for pending shorts.

GBPAUD
GBPCAD
AUSCHF
AUSNZD

Longs ----

NZDUSD

There could be more, but how many can you trade...at once.

Cheers

[mageous]

Hi guys,

The dashbard dev is almost done.
Puropose is to scan tons of pairs easily instead of clicking (or opening) a chart every 4 hours to look for a setup.

At first, I wanted to also set the nearest weekly supp/resistance lvl, pips distance etc ... but I finally gave up because the basic idea is to receive an alert WHEN something is happening, once received you have plenty of time to open the chart and check by yourself.

For the alerts, you will have the basic sound alert and a mobile alert (easy for traders who place this on a VPS, that's how I do).
Oh yes, I'm using the STOC instead of RSI2 for two reasons. First is it less cpu intensive (better when scanning a shitload of pairs) and second, it's much much much easier to code.

AS i'm still coding this, I would be glad to have your comments.

Lio

PS : At the right side it's the NB-i Breakeven indicator, nothing to do with the dash.

Hi lhDT, great dashboard. Thanks for coding this.
would it be possible to highlight the pairs that has met all the conditions for pending trade?

[blazko]

Lio: great idea with the DB.
I dont know if its hard to code or not but would you consider displaying all the pairs in 2 or 3 columns?
On a wide screen this will be a hell lot easier to read.

Regards

[McNish]

Hello All,

Can't say enough of what's already said so many times. Thank you Mr. Bob. This time it's for the manual. What a perspective for showing us the larger picture. Great stuff.

@ Gertje : Very impressive returns there. Live ? ?

@ lhDT n Bob: That's a Q I too had in mind. What is the relevance of rsi / stoch crossing the AO 0 line? Also Bob, if I understand correctly, the RSI 2 is actually using the data array from TMA slope histo indi and it's not actually a standard standalone RSI which is why the extra CPU load for some of us (not me of course). Can you elaborate on the reasoning why the crossing of the RSI across the AO zero line has any value?

@ lhDT : MIB, can u please have a different thread for your DB, and also carry the relevant posts there that discuss your DB? That will be an apt thing to do. TY.

The rest of the system is I guess quite clear to me except for the question above. I read the manual properly, went through the whole thread doing visual testing as and when needed and understood the progression of PA and how to benefit from it step by step, day by day. I will carry forward the synergies of this system to what I do my style and come up with filters for 10.4 and report back if there is a value increment to 10.4, or mine too for that matter.

Regards,