The Incredible 10.4 - For Dummies

Locked
fire580
Trader
Posts: 314
Joined: Wed May 09, 2012 4:51 pm

Re: The Incredible 10.4 - For Dummies

Post by fire580 »

Thanks for the response WideEyed ..... I looked for that remove script option but it is not there?

Thanks,
Fire580
The_Snowman
Trader
Posts: 395
Joined: Sun Nov 27, 2011 8:24 am
Location: Australia

Re: The Incredible 10.4 - For Dummies

Post by The_Snowman »

fire580 wrote:Thanks for the response WideEyed ..... I looked for that remove script option but it is not there?

Thanks,
Fire580
You will only see it if there is a script there, most scripts run 1 time I believe but will be corrected for sure

;)
fire580
Trader
Posts: 314
Joined: Wed May 09, 2012 4:51 pm

Re: The Incredible 10.4 - For Dummies

Post by fire580 »

Thanks The_Snowman appreciate your response.

Best Regards,
Fire580
User avatar
mrelectron
Trader
Posts: 77
Joined: Fri Apr 27, 2012 2:15 pm
Location: Sydney

Re: The Incredible 10.4 - For Dummies

Post by mrelectron »

Hi:

On the following pairs - I'm not getting any Pivots displayed.

NZDUSD
EURNZD
GBPCHF
GBPAUD
GBPCAD
GBPNZD
GBPJPY
NZDJPY
NZDCHF
NZDCAD


I had a look at the history folder, there does not seem to be any history for these pairs. When I try and run the Force History Download script (ForceLoadHistoricalData.mq4.Copyright 2012, Matt Kennel), I get the following message.

Failed: EURNZD.G( 10080 43200) GBPAUD.G( 10080 43200) GBPCAD.G( 10080 43200) GBPCHF.G( 10080 43200) GBPJPY.G( 10080 43200) GBPNZD.G( 10080 43200) NZDCAD.G( 10080 43200) NZDCHF.G( 10080 43200) NZDJPY.G( 10080 43200) NZDUSD.G( 10080 43200)


I'm using a GlobalPrime demo account.

Any ideas?

Thanks
Mark
User avatar
MurphyMan
Trader
Posts: 345
Joined: Tue Nov 15, 2011 2:35 pm
Location: Southern Illinois, USA

Re: The Incredible 10.4 - For Dummies

Post by MurphyMan »

mrelectron wrote:Hi:

On the following pairs - I'm not getting any Pivots displayed.
account.

Any ideas?

Thanks
Mark
Double check that you are using 4H charts.
Last edited by MurphyMan on Sat Feb 23, 2013 3:31 pm, edited 1 time in total.
not1891
Posts: 6
Joined: Sat Nov 26, 2011 8:46 pm
Location: Sweden

Re: The Incredible 10.4 - For Dummies

Post by not1891 »

mrelectron wrote:Hi:

On the following pairs - I'm not getting any Pivots displayed.

NZDUSD
EURNZD
GBPCHF
GBPAUD
GBPCAD
GBPNZD
GBPJPY
NZDJPY
NZDCHF
NZDCAD


I had a look at the history folder, there does not seem to be any history for these pairs. When I try and run the Force History Download script (ForceLoadHistoricalData.mq4.Copyright 2012, Matt Kennel), I get the following message.

Failed: EURNZD.G( 10080 43200) GBPAUD.G( 10080 43200) GBPCAD.G( 10080 43200) GBPCHF.G( 10080 43200) GBPJPY.G( 10080 43200) GBPNZD.G( 10080 43200) NZDCAD.G( 10080 43200) NZDCHF.G( 10080 43200) NZDJPY.G( 10080 43200) NZDUSD.G( 10080 43200)


I'm using a GlobalPrime demo account.

Any ideas?

Thanks
Mark

I had similar problems but I solved it by using the f2 after I had used the script. After that I got all the pivots.
Ashflash
Trader
Posts: 22
Joined: Wed Dec 28, 2011 10:18 am
Location: Byron Bay - Australia

Re: The Incredible 10.4 - For Dummies

Post by Ashflash »

Hello

I am using Bully Pepperstone AUS (GMT+3) and have noticed that my pivots are slightly different to alot of other members posted charts, is this a big concern? I know in the past with prior NB masterpieces it has been...

Any input is greatly appreciated.

Thanks in advance.

Ash
You do not have the required permissions to view the files attached to this post.
User avatar
mjws00
Trader
Posts: 609
Joined: Fri Jan 04, 2013 10:17 pm
Location: Victoria

Re: The Incredible 10.4 - For Dummies

Post by mjws00 »

Ashflash wrote:Hello

I am using Bully Bully Pepperstone AUS (GMT+3) and have noticed that my pivots are slightly different to alot of other members posted charts, is this a big concern? I know in the past with prior NB masterpieces it has been...

Any input is greatly appreciated.

Thanks in advance.

Ash
I specifically set up an Cowboy IBFX demo so I would be on the exact same page as Bob and others in the thread. I think the markets seem to respect those pivots the best. It also is common ground and a reference for discussion. So I just went ahead and did it. Takes all of 2 minutes tops.

Remember though, these are swing trades. Price may range around a weekly pivot by 10 or more pips. Often it will swing 20 pips both sides before breaking out or rejecting. Typically the pivots from other brokers end up in that range any way. So not a deal breaker, just a hassle.

But subjectively speaking... the patterns and groupings seem tighter on GMT-0. Pull up both platforms and make your own judgement. It is free.

Mike
Reading the dark heart.
Ashflash
Trader
Posts: 22
Joined: Wed Dec 28, 2011 10:18 am
Location: Byron Bay - Australia

Re: The Incredible 10.4 - For Dummies

Post by Ashflash »

mjws00 wrote:
Ashflash wrote:Hello

I am using Bully Bully Bully Pepperstone AUS (GMT+3) and have noticed that my pivots are slightly different to alot of other members posted charts, is this a big concern? I know in the past with prior NB masterpieces it has been...

Any input is greatly appreciated.

Thanks in advance.

Ash
I specifically set up an Cowboy IBFX demo so I would be on the exact same page as Bob and others in the thread. I think the markets seem to respect those pivots the best. It also is common ground and a reference for discussion. So I just went ahead and did it. Takes all of 2 minutes tops.

Remember though, these are swing trades. Price may range around a weekly pivot by 10 or more pips. Often it will swing 20 pips both sides before breaking out or rejecting. Typically the pivots from other brokers end up in that range any way. So not a deal breaker, just a hassle.

But subjectively speaking... the patterns and groupings seem tighter on GMT-0. Pull up both platforms and make your own judgement. It is free.

Mike


Thanks Mike

I resurected an old Cowboy IBFX demo, loaded all the indicators, scripts, templates and profiles and now it's perfect!

Ash
veeyem
Trader
Posts: 21
Joined: Thu Jan 31, 2013 12:59 pm

Re: The Incredible 10.4 - For Dummies

Post by veeyem »

Can anyone suggest me on how to attach the 10.4 Trade manager to manage the open trades. I already use 10.4 Info page but it doesn't seem to manage the open trades. Thx.
Locked

Return to “Nanningbob 10.x”