Multi 10:4 Trader EA

[cad0811]

Andy,

What is the actual difference between version 1.09 and 2.00 ?

Results are identical on all brokers in my tests. The only difference I can see is the buttons.

Is that all?

Frank

buttons and quite a few bug fixes, what don't you like?

hi MrLong!
small suggestion, could you add a single currency, the highest percentage and the lowest percentage, so that we can more intuitive see each currency cycle, facilitate appropriate modify ea Settings and strategies, thank you!
cheers

[MrLong]

Andy,

What is the actual difference between version 1.09 and 2.00 ?

Results are identical on all brokers in my tests. The only difference I can see is the buttons.

Is that all?

Frank

buttons and quite a few bug fixes, what don't you like?

hi MrLong!
small suggestion, could you add a single currency, the highest percentage and the lowest percentage, so that we can more intuitive see each currency cycle, facilitate appropriate modify ea Settings and strategies, thank you!
cheers

Watermark, good idea but we have no room.

[MrLong]

Now we have the drawdown, my EA-2 has entered those same trades, let's see.

[simplex]

1.5 GB may be 'rather weak' for a laptop/PC, but most VPS users won't have more than 1K RAM.

Perhaps an idea to allow turning buttons on/off in the input parameters?

Similarly, it would be great to have the option of not plotting the correlations on the chart. This would help for smaller screen sizes and for weaker machines and VPS.

I agree. For some future release it might be worth considering the option to switch those GUI elements off that a specific user does not need for whatever reason, e.g. buttons for cpu consumption, correlation pairs for saving space, etc.

Automatically resizing the grid background when switching GUI elements on / off might be some 'interesting' task though ... I know what I'm talking about ...

simplex

[sapper1971]

Hi all, I have read through this thread and noticed lots of people with various display isssues that don't seem to have been resolved.

I have tried installing it on FX Systems on all different time frames and it displays the following:

fximage.jpg

As you can see it loads most of the settings fine, it doesn't get the remaining information ie correlations ask price and rsi all read 0.00

I noticed that the expert throws up errors when trying to get the correlations which are listed below:
the epsilon is 3 digits short of what you have used do you think this may be whats causing the error??

2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: GBPNZD.fxs.close[0]= iClose(GBPNZD.fxs, tf,0) : 0.00000
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: (symbol2.close < EPSILON)...
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: S1: AUDCAD.fxs, S2: GBPNZD.fxs, tf: 1440, periods: 50
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: AUDCAD.fxs.close[0] = iClose(GBPNZD.fxs, tf,0) : 0.00000
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: (symbol.close < EPSILON) ...
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: S1: AUDCAD.fxs, S2: GBPNZD.fxs, tf: 1440, periods: 50
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: GBPJPY.fxs.close[0]= iClose(GBPJPY.fxs, tf,0) : 0.00000
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: (symbol2.close < EPSILON)...
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: S1: AUDCAD.fxs, S2: GBPJPY.fxs, tf: 1440, periods: 50
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: AUDCAD.fxs.close[0] = iClose(GBPJPY.fxs, tf,0) : 0.00000
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: (symbol.close < EPSILON) ...
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: S1: AUDCAD.fxs, S2: GBPJPY.fxs, tf: 1440, periods: 50
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: GBPCHF.fxs.close[0]= iClose(GBPCHF.fxs, tf,0) : 0.00000
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: (symbol2.close < EPSILON)...
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: S1: AUDCAD.fxs, S2: GBPCHF.fxs, tf: 1440, periods: 50
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: AUDCAD.fxs.close[0] = iClose(GBPCHF.fxs, tf,0) : 0.00000
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: (symbol.close < EPSILON) ...
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: S1: AUDCAD.fxs, S2: GBPCHF.fxs, tf: 1440, periods: 50
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: GBPCAD.fxs.close[0]= iClose(GBPCAD.fxs, tf,0) : 0.00000
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: (symbol2.close < EPSILON)...
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: S1: AUDCAD.fxs, S2: GBPCAD.fxs, tf: 1440, periods: 50
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: AUDCAD.fxs.close[0] = iClose(GBPCAD.fxs, tf,0) : 0.00000
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: (symbol.close < EPSILON) ...
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: S1: AUDCAD.fxs, S2: GBPCAD.fxs, tf: 1440, periods: 50
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: GBPAUD.fxs.close[0]= iClose(GBPAUD.fxs, tf,0) : 0.00000
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: (symbol2.close < EPSILON)...
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: S1: AUDCAD.fxs, S2: GBPAUD.fxs, tf: 1440, periods: 50
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: AUDCAD.fxs.close[0] = iClose(GBPAUD.fxs, tf,0) : 0.00000
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: (symbol.close < EPSILON) ...
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: S1: AUDCAD.fxs, S2: GBPAUD.fxs, tf: 1440, periods: 50
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: EURUSD.fxs.close[0]= iClose(EURUSD.fxs, tf,0) : 0.00000
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: (symbol2.close[i] < EPSILON)...
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: S1: AUDCAD.fxs, S2: EURUSD.fxs, tf: 1440, periods: 50
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: AUDCAD.fxs.close[0] = iClose(EURUSD.fxs, tf,0) : 0.00000
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: (symbol.close[i] < EPSILON) ...
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: S1: AUDCAD.fxs, S2: EURUSD.fxs, tf: 1440, periods: 50
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: EURNZD.fxs.close[0]= iClose(EURNZD.fxs, tf,0) : 0.00000
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: (symbol2.close[i] < EPSILON)...
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: S1: AUDCAD.fxs, S2: EURNZD.fxs, tf: 1440, periods: 50
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: AUDCAD.fxs.close[0] = iClose(EURNZD.fxs, tf,0) : 0.00000
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: (symbol.close[i] < EPSILON) ...
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: S1: AUDCAD.fxs, S2: EURNZD.fxs, tf: 1440, periods: 50
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: EURJPY.fxs.close[0]= iClose(EURJPY.fxs, tf,0) : 0.00000
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: (symbol2.close[i] < EPSILON)...
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: S1: AUDCAD.fxs, S2: EURJPY.fxs, tf: 1440, periods: 50
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: AUDCAD.fxs.close[0] = iClose(EURJPY.fxs, tf,0) : 0.00000
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: (symbol.close[i] < EPSILON) ...
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: S1: AUDCAD.fxs, S2: EURJPY.fxs, tf: 1440, periods: 50
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: EURGBP.fxs.close[0]= iClose(EURGBP.fxs, tf,0) : 0.00000
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: (symbol2.close[i] < EPSILON)...
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: S1: AUDCAD.fxs, S2: EURGBP.fxs, tf: 1440, periods: 50
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: AUDCAD.fxs.close[0] = iClose(EURGBP.fxs, tf,0) : 0.00000
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: (symbol.close[i] < EPSILON) ...
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: S1: AUDCAD.fxs, S2: EURGBP.fxs, tf: 1440, periods: 50
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: EURCHF.fxs.close[0]= iClose(EURCHF.fxs, tf,0) : 0.00000
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: (symbol2.close[i] < EPSILON)...
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: S1: AUDCAD.fxs, S2: EURCHF.fxs, tf: 1440, periods: 50
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: AUDCAD.fxs.close[0] = iClose(EURCHF.fxs, tf,0) : 0.00000
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: (symbol.close[i] < EPSILON) ...
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: S1: AUDCAD.fxs, S2: EURCHF.fxs, tf: 1440, periods: 50
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: EURCAD.fxs.close[0]= iClose(EURCAD.fxs, tf,0) : 0.00000
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: (symbol2.close[i] < EPSILON)...
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: S1: AUDCAD.fxs, S2: EURCAD.fxs, tf: 1440, periods: 50
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: AUDCAD.fxs.close[0] = iClose(EURCAD.fxs, tf,0) : 0.00000
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: (symbol.close[i] < EPSILON) ...
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: S1: AUDCAD.fxs, S2: EURCAD.fxs, tf: 1440, periods: 50
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: EURAUD.fxs.close[0]= iClose(EURAUD.fxs, tf,0) : 0.00000
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: (symbol2.close[i] < EPSILON)...
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: S1: AUDCAD.fxs, S2: EURAUD.fxs, tf: 1440, periods: 50
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: AUDCAD.fxs.close[0] = iClose(EURAUD.fxs, tf,0) : 0.00000
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: (symbol.close[i] < EPSILON) ...
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: S1: AUDCAD.fxs, S2: EURAUD.fxs, tf: 1440, periods: 50
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: CHFJPY.fxs.close[0]= iClose(CHFJPY.fxs, tf,0) : 0.00000
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: (symbol2.close[i] < EPSILON)...
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: S1: AUDCAD.fxs, S2: CHFJPY.fxs, tf: 1440, periods: 50
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: AUDCAD.fxs.close[0] = iClose(CHFJPY.fxs, tf,0) : 0.00000
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: (symbol.close[i] < EPSILON) ...
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: S1: AUDCAD.fxs, S2: CHFJPY.fxs, tf: 1440, periods: 50
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: CADJPY.fxs.close[0]= iClose(CADJPY.fxs, tf,0) : 0.00000
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: (symbol2.close[i] < EPSILON)...
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: S1: AUDCAD.fxs, S2: CADJPY.fxs, tf: 1440, periods: 50
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: AUDCAD.fxs.close[0] = iClose(CADJPY.fxs, tf,0) : 0.00000
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: (symbol.close[i] < EPSILON) ...
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: S1: AUDCAD.fxs, S2: CADJPY.fxs, tf: 1440, periods: 50
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: CADCHF.fxs.close[0]= iClose(CADCHF.fxs, tf,0) : 0.00000
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: (symbol2.close[i] < EPSILON)...
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: S1: AUDCAD.fxs, S2: CADCHF.fxs, tf: 1440, periods: 50
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: AUDCAD.fxs.close[0] = iClose(CADCHF.fxs, tf,0) : 0.00000
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: (symbol.close[i] < EPSILON) ...
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: S1: AUDCAD.fxs, S2: CADCHF.fxs, tf: 1440, periods: 50
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: AUDUSD.fxs.close[0]= iClose(AUDUSD.fxs, tf,0) : 0.00000
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: (symbol2.close[i] < EPSILON)...
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: S1: AUDCAD.fxs, S2: AUDUSD.fxs, tf: 1440, periods: 50
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: AUDCAD.fxs.close[0] = iClose(AUDUSD.fxs, tf,0) : 0.00000
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: (symbol.close[i] < EPSILON) ...
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: S1: AUDCAD.fxs, S2: AUDUSD.fxs, tf: 1440, periods: 50
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: AUDNZD.fxs.close[0]= iClose(AUDNZD.fxs, tf,0) : 0.00000
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: (symbol2.close[i] < EPSILON)...
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: S1: AUDCAD.fxs, S2: AUDNZD.fxs, tf: 1440, periods: 50
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: AUDCAD.fxs.close[0] = iClose(AUDNZD.fxs, tf,0) : 0.00000
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: (symbol.close[i] < EPSILON) ...
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: S1: AUDCAD.fxs, S2: AUDNZD.fxs, tf: 1440, periods: 50
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: AUDJPY.fxs.close[0]= iClose(AUDJPY.fxs, tf,0) : 0.00000
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: (symbol2.close[i] < EPSILON)...
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: S1: AUDCAD.fxs, S2: AUDJPY.fxs, tf: 1440, periods: 50
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: AUDCAD.fxs.close[0] = iClose(AUDJPY.fxs, tf,0) : 0.00000
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: (symbol.close[i] < EPSILON) ...
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: S1: AUDCAD.fxs, S2: AUDJPY.fxs, tf: 1440, periods: 50
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: AUDCHF.fxs.close[0]= iClose(AUDCHF.fxs, tf,0) : 0.00000
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: (symbol2.close[i] < EPSILON)...
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: S1: AUDCAD.fxs, S2: AUDCHF.fxs, tf: 1440, periods: 50
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: AUDCAD.fxs.close[0] = iClose(AUDCHF.fxs, tf,0) : 0.00000
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: (symbol.close[i] < EPSILON) ...
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: S1: AUDCAD.fxs, S2: AUDCHF.fxs, tf: 1440, periods: 50
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: AUDCAD.fxs.close[0]= iClose(AUDCAD.fxs, tf,0) : 0.00000
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: (symbol2.close[i] < EPSILON)...
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: S1: AUDCAD.fxs, S2: AUDCAD.fxs, tf: 1440, periods: 50
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: AUDCAD.fxs.close[0] = iClose(AUDCAD.fxs, tf,0) : 0.00000
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: (symbol.close[i] < EPSILON) ...
2013.04.23 12:10:47 Multi_10_4_EAv2.01b AUDCHF.fxs2,H1: S1: AUDCAD.fxs, S2: AUDCAD.fxs, tf: 1440, periods: 50


___________________________________________________________________________________

Here is exactly the same files run through Alpari no problems at all both platforms have build 482 so it can't be that.

Any ideas on how to get it working on FX systems would be apreciated as I dont want to fund two seperate accounts atm.

Thanks for looking anyway.

Regards

alpari.jpg

[simplex]

Hi all,

At last I could figure out what caused my problems several days ago when moving the EA from HiRes development machine to LoRes test. Remember? Grid objects just did not fit to each other on one machine when with equal settings they matched perfectly on the other one.

Both machines had different Windows display settings: 125% zoom factor on HiRes, 100% on LoRes display. Scaled down HiRes to 100% as well now - guess what!

Moving the EA between them works absolutely smooth now. No other application besides Crap4 which I run on both machines caused such problems until now.

Lesson learned: don't tweak your Windows display settings too much when designing sophisticated GUIs in Crap4.

Jürgen

[roman101]

Now we have the drawdown, my EA-2 has entered those same trades, let's see.

Hello Andy,
How you doing on the drawdown with 2nd EA, or its to early to say.
Cheers

[MrLong]

Now we have the drawdown, my EA-2 has entered those same trades, let's see.

Hello Andy,
How you doing on the drawdown with 2nd EA, or its to early to say.
Cheers

I've not got a lot done this week, I've got a dash of the flu.

The drawdown trades I screwed up because of a bug in the number 2 EA.

Andy

[forextra]

Hi guys - hope someone can help me find the error. I had 2.01b running well last week but this week it won't load at all. Tried downloading and re-installing everything including Empty4 but still nothing. See attached error message which I'm sure will alert to what I need to replace or upload.
Obviously coding is not my forte but I am thoroughly engrossed in this thread and want to keep testing in order to keep up to date and offer my input.
Allan

[MrLong]

Hi guys - hope someone can help me find the error. I had 2.01b running well last week but this week it won't load at all. Tried downloading and re-installing everything including Empty4 but still nothing. See attached error message which I'm sure will alert to what I need to replace or upload.
Obviously coding is not my forte but I am thoroughly engrossed in this thread and want to keep testing in order to keep up to date and offer my input.
Allan

Do you have the correct dll installed.