Multi 10:4 Trader EA

[rosst]

Version 2.04: ON PAGE 1


Added The CSS entry method.

THE INDI CSS_MrLong, IS ONLY FOR THE EA, YOU SHOULD USE, 10.5 CurrencySlopeStrength1.0.7d FOR YOUR CHARTS.

You will need the : CSS_MrLong indi, just drop it in your experts/indicators folder,
the EA reads this modified indi and does not error.

Colors on the CSS column, represent the color of the CSS indi, the CSS reading should be below 2.50 for the entry signal, I haven't tested it because we have had no signals but it seems ok.

ONLY 2.04 WILL WORK WITH THIS CSS_MrLong indi.

Hi all, I know you add this indi to the EA but I think I read before that another indi needs to be added to the chart? Is that still the case with the new 2.04 version? Thanks!

I also want to know "10.5 CurrencySlopeStrength1.0.7 d" needs to be loaded?Or directly in the target folder is ok?

You will need it for your template. but it seems it may need to be adjusted for different brokers...

[MrLong]

Version 2.04: ON PAGE 1


Added The CSS entry method.

THE INDI CSS_MrLong, IS ONLY FOR THE EA, YOU SHOULD USE, 10.5 CurrencySlopeStrength1.0.7d FOR YOUR CHARTS.

You will need the : CSS_MrLong indi, just drop it in your experts/indicators folder,
the EA reads this modified indi and does not error.

Colors on the CSS column, represent the color of the CSS indi, the CSS reading should be below 2.50 for the entry signal, I haven't tested it because we have had no signals but it seems ok.

ONLY 2.04 WILL WORK WITH THIS CSS_MrLong indi.

Hi all, I know you add this indi to the EA but I think I read before that another indi needs to be added to the chart? Is that still the case with the new 2.04 version? Thanks!

I also want to know "10.5 CurrencySlopeStrength1.0.7 d" needs to be loaded?Or directly in the target folder is ok?

Hi,

You only need the CSS_MrLong indicator to run the EA, but it will not work on your charts, so use the normal one on your chart.

[MrLong]

Version 2.04: ON PAGE 1


Added The CSS entry method.

THE INDI CSS_MrLong, IS ONLY FOR THE EA, YOU SHOULD USE, 10.5 CurrencySlopeStrength1.0.7d FOR YOUR CHARTS.

You will need the : CSS_MrLong indi, just drop it in your experts/indicators folder,
the EA reads this modified indi and does not error.

Colors on the CSS column, represent the color of the CSS indi, the CSS reading should be below 2.50 for the entry signal, I haven't tested it because we have had no signals but it seems ok.

ONLY 2.04 WILL WORK WITH THIS CSS_MrLong indi.

Hi all, I know you add this indi to the EA but I think I read before that another indi needs to be added to the chart? Is that still the case with the new 2.04 version? Thanks!

I also want to know "10.5 CurrencySlopeStrength1.0.7 d" needs to be loaded?Or directly in the target folder is ok?

Hi,

You only need the CSS_MrLong indicator to run the EA, but it will not work on your charts, so use the normal one on your chart.

Could you be so kind as to direct me to the normal one for the chart? Thanks in advance.

Hi,

There is a zip file on one of the pages : http://www.stevehopwoodforex.com/phpBB3 ... start=3730

[simplex]

Version 2.04: ON PAGE 1

Added The CSS entry method.

You will need the : CSS_MrLong indi ...

ONLY 2.04 WILL WORK WITH THIS CSS_MrLong indi.

Hi Andy,

Very nice work again! Thank you for sharing!

Questions on this indi:
You called it v1.0.7 D - in Baluda's thread I can't find a v1.0.7. Which was the initial version you used?

If something younger than v1.0.6, could you provide me a link to the original or send me the version you started with?

Would be nice because I'm also working on a modification.

Regards, Jürgen

[MrLong]

Version 2.04: ON PAGE 1

Added The CSS entry method.

You will need the : CSS_MrLong indi ...

ONLY 2.04 WILL WORK WITH THIS CSS_MrLong indi.

Hi Andy,

Very nice work again! Thank you for sharing!

Questions on this indi:
You called it v1.0.7 D - in Baluda's thread I can't find a v1.0.7. Which was the initial version you used?

If something younger than v1.0.6, could you provide me a link to the original or send me the version you started with?

Would be nice because I'm also working on a modification.

Regards, Jürgen

Hi Jürgen


There is a zip file on one of the pages : viewtopic.php?f=38&t=1481&start=3730

That contains the latest version from baluda, I modified that version for the EA, but it will only work for the EA because I stripped a bunch of code out of the original to stop the error.

Put the CSS_MrLong indi in experts/indicators and forgrt about it.

Use 10.5 CurrencySlopeStrength1.0.7d for you charts.

Andy

[simplex]

Version 2.04: ON PAGE 1

Added The CSS entry method.

You will need the : CSS_MrLong indi ...

ONLY 2.04 WILL WORK WITH THIS CSS_MrLong indi.

Hi Andy,

Very nice work again! Thank you for sharing!

Questions on this indi:
You called it v1.0.7 D - in Baluda's thread I can't find a v1.0.7. Which was the initial version you used?

If something younger than v1.0.6, could you provide me a link to the original or send me the version you started with?

Would be nice because I'm also working on a modification.

Regards, Jürgen

Hi Jürgen


There is a zip file on one of the pages : viewtopic.php?f=38&t=1481&start=3730

That contains the latest version from baluda, I modified that version for the EA, but it will only work for the EA because I stripped a bunch of code out of the original to stop the error.

Put the CSS_MrLong indi in experts/indicators and forgrt about it.

Use 10.5 CurrencySlopeStrength1.0.7d for you charts.

Andy

Thank's a lot - that helps!

Jürgen

[6y588]

Has anyone tried to run this EA on gold?

[cad0811]

In 18 hours before I open the ea, there is no trade and pending order, am I wrong?Oota Settings

[taipan]

In 18 hours before I open the ea, there is no trade and pending order, am I wrong?Oota Settings

Me too, no trade either. Also using OOTB setting.

[cad0811]

In 18 hours before I open the ea, there is no trade and pending order, am I wrong?Oota Settings

Me too, no trade either. Also using OOTB setting.

I try to another account open only rsi, close the CSS, or no trade