10.4 A Complete System

This is where Bob posts his own threads
Post Reply
pgd
Trader
Posts: 36
Joined: Wed Mar 28, 2012 3:43 pm

Re: 10.4 A Complete System

Post by pgd »

art wrote:i get a lot of problems with my Empty4 platforms not responding the revolving circle syndrom, the comp is clean, did a malware sacan all ok, any ideas, cheers
art,

when an indicator generates a continuing error, the error is continuously dumped into a log file.
the log file can grow into several 100 MB if the error is not sorted out. this in turn slows down the computer. on one occasion, my log file grew to over 10 GB !! that's when i dug deeper and discovered what was happening...

here's an extract of the log file that should explain this:
-----------------------------------------------------------------------------------------------------------------
13:09:03 myIndicator GBPAUD,H4: unknown subwindow number 2 for ObjectCreate function
13:09:04 myIndicator GBPAUD,H4: unknown subwindow number 2 for ObjectCreate function
13:09:04 myIndicator GBPAUD,H4: unknown subwindow number 2 for ObjectCreate function
13:09:04 myIndicator GBPAUD,H4: unknown subwindow number 2 for ObjectCreate function
13:09:04 myIndicator GBPAUD,H4: unknown subwindow number 2 for ObjectCreate function
13:09:05 myIndicator GBPAUD,H4: unknown subwindow number 2 for ObjectCreate function
13:09:05 myIndicator GBPAUD,H4: unknown subwindow number 2 for ObjectCreate function
13:09:06 myIndicator GBPAUD,H4: unknown subwindow number 2 for ObjectCreate function
13:09:06 myIndicator GBPAUD,H4: unknown subwindow number 2 for ObjectCreate function
13:09:08 myIndicator GBPAUD,H4: unknown subwindow number 2 for ObjectCreate function
13:09:08 myIndicator GBPAUD,H4: unknown subwindow number 2 for ObjectCreate function
13:09:09 myIndicator GBPAUD,H4: unknown subwindow number 2 for ObjectCreate function
13:09:09 myIndicator GBPAUD,H4: unknown subwindow number 2 for ObjectCreate function
13:09:12 myIndicator GBPAUD,H4: unknown subwindow number 2 for ObjectCreate function
13:09:12 myIndicator GBPAUD,H4: unknown subwindow number 2 for ObjectCreate function
13:09:13 myIndicator GBPAUD,H4: unknown subwindow number 2 for ObjectCreate function
13:09:13 myIndicator GBPAUD,H4: unknown subwindow number 2 for ObjectCreate function
13:09:13 myIndicator GBPAUD,H4: unknown subwindow number 2 for ObjectCreate function
13:09:13 myIndicator GBPAUD,H4: unknown subwindow number 2 for ObjectCreate function
13:09:15 myIndicator GBPAUD,H4: unknown subwindow number 2 for ObjectCreate function
13:09:15 myIndicator GBPAUD,H4: unknown subwindow number 2 for ObjectCreate function
13:09:17 myIndicator GBPAUD,H4: unknown subwindow number 2 for ObjectCreate function
13:09:17 myIndicator GBPAUD,H4: unknown subwindow number 2 for ObjectCreate function
13:09:17 myIndicator GBPAUD,H4: unknown subwindow number 2 for ObjectCreate function
-----------------------------------------------------------------------------------------------------------------
a new log file is written each day with the date for its name -- yyyymmdd.log.

in order to ascertain the error, you can open a file in a text editor and check for blocks of repetitive entries like the sample above.

in win7 these files should be located at:
c:\users\..........\AppData\Local\VirtualStore\Program Files\[your_Empty4_folder]\experts\logs\[date].log

normally, each day's file size should be in KBs.
if the file hits MBs, it's worth looking at the errors reported and sorting them out.
i delete old files every day to free up disk space.

hope this helps.
Last edited by pgd on Thu Oct 17, 2013 10:05 am, edited 1 time in total.
trader689
Trader
Posts: 674
Joined: Thu Nov 17, 2011 12:53 am

Re: 10.4 A Complete System

Post by trader689 »

hello

thanks again, have fired this up on H1 charts as seen in your picture, has taken a few trades in losses and some open profit as of this morning when i left for work, will report back


trader
The_Snowman wrote:
trader689 wrote:Hey The Snowman

thank you for sharing your unique implementation of this method using TCO ea. the results you have so far are very promising... can you elaborate any more if possible on how you manage / monitor trades after the EA takes them?

great stuff
I'm really glad you asked that - it is the age old question isn't it? Take profits or let them run!

Actually, I had the EA set to take profit at 10% increase of account balance, but the computer blue screened yesterday and when I re-opened Empty4, I believed it reverted to last saved profile and closed all trades at 2%

Anyway, the EA does what it does and has opened the trades shown below; I will move Empty4 to my VPS on the weekend so should run continuously there.

Other than that, I suggest using a RISK multiple for your take profit, e.g. with my settings, the EA calculates a position size based on Daily ATR 0.5 and a TP 2 x ATR, so R:R of 4 to 1 - so whatever you use as a NB stop loss, multiple that by 2 or 3 or 4.

Good luck :D
The_Snowman
Trader
Posts: 395
Joined: Sun Nov 27, 2011 8:24 am
Location: Australia

Re: 10.4 A Complete System

Post by The_Snowman »

MrLong wrote:
Hello The_Snowman,

Do you have a link to that page?

Many Thanks
Andy
Sure, just search that My FX Book thingy for Silent Specialist

Also Google for him, he has a thread on another forum and no not FF
The_Snowman
Trader
Posts: 395
Joined: Sun Nov 27, 2011 8:24 am
Location: Australia

Re: 10.4 A Complete System

Post by The_Snowman »

trader689 wrote:hello

thanks again, have fired this up on H1 charts as seen in your picture, has taken a few trades in losses and some open profit as of this morning when i left for work, will report back

trader
Yeah, that is pretty normal, I was in draw down at end of Asian session with these new trades but now turned around, patience grasshopper

And who thought the AUD/USD was such a good BUY early today? NB 10.6 using Stochastic did, that's who!

And it was on the PIVOT as well, hope you got some action there

:D
You do not have the required permissions to view the files attached to this post.
Last edited by The_Snowman on Thu Oct 17, 2013 12:06 pm, edited 1 time in total.
The_Snowman
Trader
Posts: 395
Joined: Sun Nov 27, 2011 8:24 am
Location: Australia

Re: 10.4 A Complete System

Post by The_Snowman »

pgd wrote:Hi Snowman,

how do you incorporate the daily pivot and the __00 sweet spots while using tco_trader?

thanks.
Well spotted, but the EA doesn't get any info from them, I use the Big Round Numbers (BRN) as a quasi grid and to visually spot Support / Resistance on the Weekly & Daily charts while I am determining the TREND for my personal trading.

The Daily Pivots are just a reference point for me to see where price is in the normal scheme of things, eg. did it open above, open below, did it go to R-1 or S-1

Also, I watch price with the ADR and AWR too, much like Bob does with his Weekly & Monthly Pivots
Anthar
Trader
Posts: 55
Joined: Mon Dec 12, 2011 6:29 pm

Re: 10.4 A Complete System

Post by Anthar »

The_Snowman wrote:
trader689 wrote:hello

thanks again, have fired this up on H1 charts as seen in your picture, has taken a few trades in losses and some open profit as of this morning when i left for work, will report back

trader
Yeah, that is pretty normal, I was in draw down at end of Asian session with these new trades but now turned around, patience grasshopper

And who thought the AUD/USD was such a good BUY early today? NB 10.6 using Stochastic did, that's who!

And it was on the PIVOT as well, hope you got some action there

:D
Yup, 10.6 did. Also cashed two more on EURCAD and AUDCAD, which were the only two signals I got yesterday. I might be closing that AUDUSD any minute now.
You do not have the required permissions to view the files attached to this post.
User avatar
Wavegarrick
Trader
Posts: 1172
Joined: Sun Dec 30, 2012 11:21 am
Location: South Africa

Re: 10.4 A Complete System

Post by Wavegarrick »

Not doing too bad just as a stand alone ea based on The Snowmans settings. :D
You do not have the required permissions to view the files attached to this post.
art
Trader
Posts: 588
Joined: Fri Mar 02, 2012 3:51 pm

Re: 10.4 A Complete System

Post by art »

wavegarrick, i like that little indie, in the right hand corner of your screen, where can i get that, cheers
art
Trader
Posts: 588
Joined: Fri Mar 02, 2012 3:51 pm

Re: 10.4 A Complete System

Post by art »

thanks for that pg, deleted all the log files on all the platforms, but alpari is still pushing my cpu up high, the other platforms are fine, so i will give alpari a miss and just use the others
User avatar
Wavegarrick
Trader
Posts: 1172
Joined: Sun Dec 30, 2012 11:21 am
Location: South Africa

Re: 10.4 A Complete System

Post by Wavegarrick »

Hi Art, lets see if i'm doing this right it is the first time I am doing this.
You do not have the required permissions to view the files attached to this post.
Post Reply

Return to “Bob's individual forum”