NB 10.6 + TCO Automated 10.6

Post by **Mike** » Thu Oct 24, 2013 8:07 am

The_Snowman wrote:
Mike wrote:TCO_Trader works very well. I would love an option, which does deactivate the ea after it has taken a trade but continues the trade logic. Does "MaxOrdersPerPair" set to 1 do this?
Thanks Mike
That should do it, or increase the hours between trades to something like 23 and then you can re-activate it the next day if there is good price action setting up, after success trade of course

Thanks, Mike

Post by **art** » Thu Oct 24, 2013 8:19 am

hi guys i cant seem to open steves mptm, experts, properties, on the chart to adjust it, any ideas cheers

yamez · Post by **yamez** » Thu Oct 24, 2013 9:11 am

Mike wrote:TCO_Trader works very well. I would love an option, which does deactivate the ea after it has taken a trade but continues the trade logic. Does "MaxOrdersPerPair" set to 1 do this?
Thanks Mike

I have MaxOrdersPerPair set to 1 and OrderDelay set to 4 (hours). Yesterday TCO took a EURJPY trade which within 4 hours, hit SL. Even though the conditions were present to re-enter the trade, TCO did not, so OrderDelay does appear to work.

MaxOrdersPePair appears to be how many trades you want to stack per position, which is also affected by OrderDelay, Stoch_Confirmation and HTF method.

peranders · Post by **peranders** » Thu Oct 24, 2013 11:17 am

The_Snowman wrote:Still up overall, yesterday was NOT kind to Trend followers no matter what system you are using; now, for many pairs, is this price action really the main reversal, a pull back or some form of consolidation - who has the answers?

I might have.
Look at the dollar index chart in combination with weekly charts for USD denominated pairs.

Post by **kwchau** » Thu Oct 24, 2013 1:10 pm

yamez wrote:
Mike wrote:TCO_Trader works very well. I would love an option, which does deactivate the ea after it has taken a trade but continues the trade logic. Does "MaxOrdersPerPair" set to 1 do this?
Thanks Mike
I have MaxOrdersPerPair set to 1 and OrderDelay set to 4 (hours). Yesterday TCO took a EURJPY trade which within 4 hours, hit SL. Even though the conditions were present to re-enter the trade, TCO did not, so OrderDelay does appear to work.

MaxOrdersPePair appears to be how many trades you want to stack per position, which is also affected by OrderDelay, Stoch_Confirmation and HTF method.

I've different experience with NZDJPY which indicated that OrderDelay is not working. I set OrderDelay to 6. In my case, new buy position was immediately opened after the last one hit SL. This happened 3 times in 2 hours.

Please see attached chart.

Post by **trader689** » Thu Oct 24, 2013 1:38 pm

sometimes with MPTM you have to disable experts by clicking the experts button on the toolbar of Empty4 so it shows a red circle rather than a green one. then you should be able to access MPTM properties. dont forget to enable experts afterwards

art wrote:hi guys i cant seem to open steves mptm, experts, properties, on the chart to adjust it, any ideas cheers

gj6n68 · Post by **gj6n68** » Thu Oct 24, 2013 1:46 pm

That worked, thanks a lot.

lionsden wrote:
gj6n68 wrote:Hello All,

Firstly thanks to all involved on here for creating wonderful strategies and EAs. I've been following both NB and TCO and must say this combination is amazing.

After running the EA though I get error on certain pairs, and was wondering if someone else has got the same errors at all. I've attached a shot of log file for reference.

Thanks in advance.
Hi,

Got into the EA properties for the AUD/USD pair and check to see if you allowed trading live for this pair.

Good luck

gj6n68 · Post by **gj6n68** » Thu Oct 24, 2013 1:50 pm

Hi All,

I've let the EA loose on demo since start of this week, and so far it is up. Waiting to see what happens in extreme moves.

cad0811 · Post by **cad0811** » Thu Oct 24, 2013 2:32 pm

Hi, everybody!
Thank you for your share the trading method first.
I artificial judge the trend of money, and then load the EA.
The following is the result of my trading today, is very good, cheers!

Forgive my poor English

tco_ea.png

yamez · Post by **yamez** » Thu Oct 24, 2013 3:03 pm

kwchau wrote:
yamez wrote:
Mike wrote:TCO_Trader works very well. I would love an option, which does deactivate the ea after it has taken a trade but continues the trade logic. Does "MaxOrdersPerPair" set to 1 do this?
Thanks Mike
I have MaxOrdersPerPair set to 1 and OrderDelay set to 4 (hours). Yesterday TCO took a EURJPY trade which within 4 hours, hit SL. Even though the conditions were present to re-enter the trade, TCO did not, so OrderDelay does appear to work.

MaxOrdersPePair appears to be how many trades you want to stack per position, which is also affected by OrderDelay, Stoch_Confirmation and HTF method.
I've different experience with NZDJPY which indicated that OrderDelay is not working. I set OrderDelay to 6. In my case, new buy position was immediately opened after the last one hit SL. This happened 3 times in 2 hours.

We are finding our way, for now set MaxOrdersPer Pair = 1 and make sure Stoch_Confirmation = 1

I don't know, the author (cheers) of this EA is not here.

NB 10.6 + TCO Automated 10.6

Re: NB 10.6 + TCO Automated 10.6

Re: NB 10.6 + TCO Automated 10.6

Re: NB 10.6 + TCO Automated 10.6

Re: NB 10.6 + TCO Automated 10.6

Re: NB 10.6 + TCO Automated 10.6

Re: NB 10.6 + TCO Automated 10.6

Re: NB 10.6 + TCO Automated 10.6

Re: NB 10.6 + TCO Automated 10.6

Re: NB 10.6 + TCO Automated 10.6

Re: NB 10.6 + TCO Automated 10.6