10.4 A Complete System

[Skyline]

Thanks it seems to work very well. I will make some size and color adjustments and use this.

Thx to you for all your work here

[art]

Thanks for that bob, will you keep the trade over the weekend if it doesn't get down there, I went short at 134 32 just under the DP

[art]

Hi bob re my last post, would you have taken the trade I took at the level I entered 134.32 it all looked good to me but it reversed, bearing in mind the 4 hour bar was red at the time

[Ray Singcar]

The pop up is in the sto 7 alert and is in the 10.6 edsel folder page 1 post 1.

Hi Bob
There is only the script file, no indi files there

I didnt say go to the 10.6 thread. This is the 10.4 and you will find on page 1 post 1.

Many thanks...

[HannesJoubert]

Morning All.

I have finally finished reading the 10.4 thread and now also the 10.6 thread.

First of all thanks are in order.

Thanks to Bob for his selfless contributions, patience and continuous quest to improve and share. |There are very few of your type around. Thanks again, I am sure that this has changed many lives for the better. You have provided the literal version of "Give a man a fish and you feed him for a day, teach him to fish and you feed him for a lifetime" all that remains now is to study properly, apply and hone our discretionary skills. Once again THANKS!

To everyone else that has contributed and guided, thanks to you too.

As I said, I am now finished reading and I think that I am up to date (in a manner of speaking)

I now want to study the PDF that was summarised for the different type of tx's available on 10.6, but I also feel that in order to do that properly, I would like to study it, with it's own images, alongside current images in the platform.

Now I would like to ask for more help again. As I have alluded to in previous posts, I am a bit of a techno-peasant, so I would like some advice as how to load the various files for 10.6 in to their correct places within the Empty4 platform. I ask this here as Bob has asked that questions be placed in 10.4 until he is finished with his summary of 10.6 on the new thread.

So, any and all help would be really appreciated.

Cheers

H

[nanningbob]

Morning All.

I have finally finished reading the 10.4 thread and now also the 10.6 thread.

First of all thanks are in order.

Thanks to Bob for his selfless contributions, patience and continuous quest to improve and share. |There are very few of your type around. Thanks again, I am sure that this has changed many lives for the better. You have provided the literal version of "Give a man a fish and you feed him for a day, teach him to fish and you feed him for a lifetime" all that remains now is to study properly, apply and hone our discretionary skills. Once again THANKS!

To everyone else that has contributed and guided, thanks to you too.

As I said, I am now finished reading and I think that I am up to date (in a manner of speaking)

I now want to study the PDF that was summarised for the different type of tx's available on 10.6, but I also feel that in order to do that properly, I would like to study it, with it's own images, alongside current images in the platform.

Now I would like to ask for more help again. As I have alluded to in previous posts, I am a bit of a techno-peasant, so I would like some advice as how to load the various files for 10.6 in to their correct places within the Empty4 platform. I ask this here as Bob has asked that questions be placed in 10.4 until he is finished with his summary of 10.6 on the new thread.

So, any and all help would be really appreciated.

Cheers

H

Page 1 Post 1 of this thread there are directions on where to put the various indis, templates, etc.

[art]

Hi bob I also would like to add my thanks, I think I'm almost ready to go live with this, I have been testing the water with micros, now that you've explained the range trading strategy, we're ready to go, by the way still sitting on the short eurusd from friday, had I known the range trading strategy would have closed the trade when golden rod appesred

[HannesJoubert]

Morning All.

I have finally finished reading the 10.4 thread and now also the 10.6 thread.

First of all thanks are in order.

Thanks to Bob for his selfless contributions, patience and continuous quest to improve and share. |There are very few of your type around. Thanks again, I am sure that this has changed many lives for the better. You have provided the literal version of "Give a man a fish and you feed him for a day, teach him to fish and you feed him for a lifetime" all that remains now is to study properly, apply and hone our discretionary skills. Once again THANKS!

To everyone else that has contributed and guided, thanks to you too.

As I said, I am now finished reading and I think that I am up to date (in a manner of speaking)

I now want to study the PDF that was summarised for the different type of tx's available on 10.6, but I also feel that in order to do that properly, I would like to study it, with it's own images, alongside current images in the platform.

Now I would like to ask for more help again. As I have alluded to in previous posts, I am a bit of a techno-peasant, so I would like some advice as how to load the various files for 10.6 in to their correct places within the Empty4 platform. I ask this here as Bob has asked that questions be placed in 10.4 until he is finished with his summary of 10.6 on the new thread.

So, any and all help would be really appreciated.

Cheers

H

Page 1 Post 1 of this thread there are directions on where to put the various indis, templates, etc.

Thanks for the reply Bob, at the moment I am looking at implementing only 10.6...Unless I am misreading, the instructions refer to 10.4 / 5 ?

[vdwaltme]

Hi Hannes

I thought you said that you went through the 10.4 thread!

Bob mentioned a few pages back that he will start a thread for 10.6. Clearly that is not done yet. (Unless I missed that post.)

10.6 is still in "beta" and 10.4 is the current version. Post 1 as Bob said, holds the explanation on where to copy what.

If you still having problems with where to copy what, please send me a personal message and I will take you through the steps.

Regards
Marius

[HannesJoubert]

Hi Marius, thanks for the reply...

Yes, it took me about 10 days to read the thread, if posts have changed, I may have missed the changes due to focus. The 10.6 thread is informative and that is what I am referring to whilst I try to learn the 10.6 system.

I have implemented the full 10.4 template / profile which includes a 10.6 chart window etc so it's not that I have not loaded 10.6, I was merely wondering if it is at all possible to have only 10.6 profiles loaded without all the other 10.4 charts. My machine can handle the load so that is not a problem either...

In the meantime, I will carry on with the single 10.6 window.

As ek mag vra, is jy in ZA, of het jy ook al verkas landuit??

Cheers

H