10.6 EDSEL

Post by **alorente** » Tue Mar 25, 2014 2:17 pm

milanese » Tue Mar 25, 2014 2:51 pm wrote:
milanese » Tue Mar 25, 2014 12:21 pm wrote:
taggie11 » Tue Mar 25, 2014 8:25 am wrote:
Tommaso

Is there any way to combine 2 of these in one - so that I can see H4 and H1 or D1 in one indicator pane? Save on real estate....

THanks
Doc
I will take a look...

Cheers

Tommaso
Ok this one is showing two TF OOTB it shows H4 and D1 the alerts can be set for both TF seperat with
extern bool CounterTrendAlertTF1 = true; extern bool CounterTrendAlertTF2 = true;
the TFs you will use you set with:
extern int FirstTF = 240; extern int SecondTF =1440;
Note the TF for the MA's used is in this version always H4, let me now i f you wnat here two a second TF for the MA's

Cheers

Tommaso

I´ve copied the indi to the Experts/Indicators folder 3 times and I can´t get it to show up in my Custom Indicators list within Empty4. Any ideas? Yes. I closed the platform and opened it again...

Post by **nanningbob** » Tue Mar 25, 2014 2:21 pm

alorente » Tue Mar 25, 2014 10:17 pm wrote:
milanese » Tue Mar 25, 2014 2:51 pm wrote:
milanese » Tue Mar 25, 2014 12:21 pm wrote:
taggie11 » Tue Mar 25, 2014 8:25 am wrote:
Tommaso

Is there any way to combine 2 of these in one - so that I can see H4 and H1 or D1 in one indicator pane? Save on real estate....

THanks
Doc
I will take a look...

Cheers

Tommaso
Ok this one is showing two TF OOTB it shows H4 and D1 the alerts can be set for both TF seperat with
extern bool CounterTrendAlertTF1 = true; extern bool CounterTrendAlertTF2 = true;
the TFs you will use you set with:
extern int FirstTF = 240; extern int SecondTF =1440;
Note the TF for the MA's used is in this version always H4, let me now i f you wnat here two a second TF for the MA's

Cheers

Tommaso
I´ve copied the indi to the Experts/Indicators folder 3 times and I can´t get it to show up in my Custom Indicators list within Empty4. Any ideas? Yes. I closed the platform and opened it again...

I copy and paste into a working indi and then rename it. Putting it in the folder is to get frustrated.

Post by **milanese** » Tue Mar 25, 2014 2:22 pm

alorente » Tue Mar 25, 2014 2:17 pm wrote: I´ve copied the indi to the Experts/Indicators folder 3 times and I can´t get it to show up in my Custom Indicators list within Empty4. Any ideas? Yes. I closed the platform and opened it again...

are you using Empty4 build >6xx?

Cheers

Tommaso

Post by **milanese** » Tue Mar 25, 2014 2:24 pm

taggie11 » Tue Mar 25, 2014 2:11 pm wrote:
milanese » Tue Mar 25, 2014 1:51 pm wrote:
milanese » Tue Mar 25, 2014 12:21 pm wrote:
taggie11 » Tue Mar 25, 2014 8:25 am wrote:
Tommaso

Is there any way to combine 2 of these in one - so that I can see H4 and H1 or D1 in one indicator pane? Save on real estate....

THanks
Doc
I will take a look...

Cheers

Tommaso
Ok this one is showing two TF OOTB it shows H4 and D1 the alerts can be set for both TF seperat with
extern bool CounterTrendAlertTF1 = true; extern bool CounterTrendAlertTF2 = true;
the TFs you will use you set with:
extern int FirstTF = 240; extern int SecondTF =1440;
Note the TF for the MA's used is in this version always H4, let me now i f you wnat here two a second TF for the MA's

Cheers

Tommaso
Thanks Tommaso - you are a gem

Would be good to have another version with second TF for the MAs.
Doc

Here you go use

extern int     MA_TF1                  = 240;

extern int     MA_TF2                  =1440;

for setting the TFs for the MAs....

AEJ_10.6_STO_ALERT_v2_0TwoTF_MA.mq4

Cheers

Tommaso

DocT · Post by **DocT** » Tue Mar 25, 2014 2:25 pm

milanese » Tue Mar 25, 2014 2:22 pm wrote:
alorente » Tue Mar 25, 2014 2:17 pm wrote: I´ve copied the indi to the Experts/Indicators folder 3 times and I can´t get it to show up in my Custom Indicators list within Empty4. Any ideas? Yes. I closed the platform and opened it again...
are you using Empty4 build >6xx?

Cheers

Tommaso

Works fine for me in FXCM build 610.
Brilliant

Post by **matt_32** » Tue Mar 25, 2014 2:29 pm

alorente » Tue Mar 25, 2014 3:45 pm wrote:AudUsd is getting ready for a fall too. H1 and H4 on top, not quite to D1 but all the slope conditions are met. It should fall soon.

@ alorente

I was wondering..... How do you you about scanning charts for possible trade setups. Is there a quick way to identify potential trades ?

Matt

Post by **alorente** » Tue Mar 25, 2014 2:34 pm

nanningbob » Tue Mar 25, 2014 3:21 pm wrote:
alorente » Tue Mar 25, 2014 10:17 pm wrote:
milanese » Tue Mar 25, 2014 2:51 pm wrote:
milanese » Tue Mar 25, 2014 12:21 pm wrote:
taggie11 » Tue Mar 25, 2014 8:25 am wrote:
Tommaso

Is there any way to combine 2 of these in one - so that I can see H4 and H1 or D1 in one indicator pane? Save on real estate....

THanks
Doc
I will take a look...

Cheers

Tommaso
Ok this one is showing two TF OOTB it shows H4 and D1 the alerts can be set for both TF seperat with
extern bool CounterTrendAlertTF1 = true; extern bool CounterTrendAlertTF2 = true;
the TFs you will use you set with:
extern int FirstTF = 240; extern int SecondTF =1440;
Note the TF for the MA's used is in this version always H4, let me now i f you wnat here two a second TF for the MA's

Cheers

Tommaso
I´ve copied the indi to the Experts/Indicators folder 3 times and I can´t get it to show up in my Custom Indicators list within Empty4. Any ideas? Yes. I closed the platform and opened it again...
I copy and paste into a working indi and then rename it. Putting it in the folder is to get frustrated.

Nothing. I can´t get it to update my Custom Indicators list neither in the Insert Menu on top or in the navigator. It just doesn´t show up. Very frustrating...

Post by **alorente** » Tue Mar 25, 2014 2:37 pm

matt_32 » Tue Mar 25, 2014 3:29 pm wrote:
alorente » Tue Mar 25, 2014 3:45 pm wrote:AudUsd is getting ready for a fall too. H1 and H4 on top, not quite to D1 but all the slope conditions are met. It should fall soon.

@ alorente

I was wondering..... How do you you about scanning charts for possible trade setups. Is there a quick way to identify potential trades ?

Matt

There is no quick way, but with practice, the trades pop right out at you. I explained how to do the TMA analysis properly a few days ago, starting with W1 time frame, then D1, etc. I think it was Friday but I´m not sure...

Post by **alorente** » Tue Mar 25, 2014 2:39 pm

taggie11 » Tue Mar 25, 2014 3:25 pm wrote:
milanese » Tue Mar 25, 2014 2:22 pm wrote:
alorente » Tue Mar 25, 2014 2:17 pm wrote: I´ve copied the indi to the Experts/Indicators folder 3 times and I can´t get it to show up in my Custom Indicators list within Empty4. Any ideas? Yes. I closed the platform and opened it again...
are you using Empty4 build >6xx?

Cheers

Tommaso
Works fine for me in FXCM build 610.
Brilliant

Yes Tommaso, I´m using build 625.

Post by **milanese** » Tue Mar 25, 2014 2:39 pm

alorente » Tue Mar 25, 2014 2:34 pm wrote: Nothing. I can´t get it to update my Custom Indicators list neither in the Insert Menu on top or in the navigator. It just doesn´t show up. Very frustrating...

Try the ex4 maybe this works for you..

AEJ_10.6_STO_ALERT_v2_0TwoTF_MA.ex4

Cheers

Tommaso

10.6 EDSEL

Re: 10.6 EDSEL

Re: 10.6 EDSEL

Re: 10.6 EDSEL

Re: 10.6 EDSEL

Re: 10.6 EDSEL

10.6 EDSEL

Re: 10.6 EDSEL

10.6 EDSEL

Re: 10.6 EDSEL

Re: 10.6 EDSEL