HGI used with Hurst charts

Post by **milanese** » Tue Jan 06, 2015 9:48 pm

Gertje » Tue Jan 06, 2015 9:26 pm wrote:
milanese » Tue Jan 06, 2015 8:56 pm wrote: I am not sure if that combination will work as 15.08 was never intended to work with iCustom calls ..

Cheers

Tommaso
Hi Tommaso,

Will HGB work with 16.xx ?

I would use 15.06 as it is concepted for the use of 15.06, 16.xx will not give you any advantage imo

Cheers

Tommaso

sim2505 · Post by **sim2505** » Wed Jan 07, 2015 10:54 am

Tommaso,
Can I use HGI_v16.00 H1 with the HGI Hurst Trader ? or I always need HGI_v15.08 to have Hurst filter ?
Because there is more entrances with HGI_v16.00 H1 with Hurst Filter on than HGI_v15.08 with Hurst Filter on

Cheers

Sim

Post by **milanese** » Wed Jan 07, 2015 11:22 am

sim2505 » Wed Jan 07, 2015 10:54 am wrote:Tommaso,
Can I use HGI_v16.00 H1 with the HGI Hurst Trader ? or I always need HGI_v15.08 to have Hurst filter ?
Because there is more entrances with HGI_v16.00 H1 with Hurst Filter on than HGI_v15.08 with Hurst Filter on

Cheers

Sim

For EA's you should always use 15.06, the EA has a hurst filter inside so every double use makes no sense..

Cheers

Tommaso

sim2505 · Post by **sim2505** » Wed Jan 07, 2015 8:21 pm

milanese » Wed Jan 07, 2015 11:22 am wrote:
sim2505 » Wed Jan 07, 2015 10:54 am wrote:Tommaso,
Can I use HGI_v16.00 H1 with the HGI Hurst Trader ? or I always need HGI_v15.08 to have Hurst filter ?
Because there is more entrances with HGI_v16.00 H1 with Hurst Filter on than HGI_v15.08 with Hurst Filter on

Cheers

Sim
For EA's you should always use 15.06, the EA has a hurst filter inside so every double use makes no sense..

Cheers

Tommaso

Yes you are right but I use 2 TMA condition, with 5 and 11 & 40 and 88 (5 and 11 on H4), because I test on M30

. So I need indicator with Hurst filter

Cheers

Sim

Post by **pips400** » Thu Jan 08, 2015 8:59 am

Update on MTF Hurst Target

v 1.06 now option to alert on open or closed candle. Previously was set to closed only.

Post by **TraderJoeForex** » Thu Jan 08, 2015 7:45 pm

pips400 » Thu Jan 08, 2015 8:59 am wrote:Update on MTF Hurst Target

v 1.06 now option to alert on open or closed candle. Previously was set to closed only.

More awesomeness. and finding this indicator so helpfull. Cheers pips400 :!!:

rostaus · Post by **rostaus** » Fri Jan 09, 2015 4:02 am

milanese » Tue Jan 06, 2015 10:49 pm wrote:
rostaus » Tue Jan 06, 2015 1:06 pm wrote:
Hi Sim, could you advise where the Hurst EA is located thanks.
you find the EA there ---> http://www.stevehopwoodforex.com/phpBB3 ... =87&t=4009

Thanks Tommaso, I'll try it with the 15.06 version. We all really appreciate the time you spend and your fantastic abilities on this forum.

DocT · Post by **DocT** » Fri Jan 09, 2015 6:19 pm

Pips400 or anyone using the MTF Hurst Target 1.06 Indy

I love this indicator and have been using it on FXCM Empty4 with no problems - However in moving to GP Empty4 I can see the swing point but none of the lines or target areas. Obviously something I am doing wrong but I cannot work it out - driving me nuts.

Anyone had a similar problem and found a solution please let me know - I have loaded the history, auto turned on, directly copied indicator from FXCM to GP (so not fresh version), etc.

Cheers
Doc

Post by **pips400** » Fri Jan 09, 2015 7:15 pm

taggie11 » Fri Jan 09, 2015 6:19 pm wrote:Pips400 or anyone using the MTF Hurst Target 1.06 Indy

I love this indicator and have been using it on FXCM Empty4 with no problems - However in moving to GP Empty4 I can see the swing point but none of the lines or target areas. Obviously something I am doing wrong but I cannot work it out - driving me nuts.

Anyone had a similar problem and found a solution please let me know - I have loaded the history, auto turned on, directly copied indicator from FXCM to GP (so not fresh version), etc.

Cheers
Doc

Hi Doc, don't know what to suggest sorry. I have it on FXCM and GP and works fine on both. Don't know how you moved to GP e.g. copying profiles etc. Might be worth a clean install of GP and not copy template or profile etc, and set up a new template in GP then copy to the other currencies. That's all I can think of. Guess it's over to anyone else ?

Regards

Pips400

DocT · Post by **DocT** » Sun Jan 11, 2015 5:25 pm

pips400
Thanks for checking. Actually I made it from scratch and it did not work. Then with your suggestion I created a new demo (and copoied my FXCM template and idy's) et voila it works!! Go figure.
Thanks
Doc