Hopelessly confused by TDesk or Desky? Ask here.

RMSSC · Post by **RMSSC** » Wed Mar 25, 2020 10:27 pm

Good evening everyone,
I need a charitable soul to help me, I don't want to abuse the intelligence of the members of this forum.
Technically my English is not the best and although.

I have read the manual several times I do not find a way to parameterize something that will certainly be simple but basically I must be very stupid because I cannot reach my configuration goals.
How should I parameterize Desky to make a hard stop for TP and SL for individual trades in pips, just as is allowed on the moving day.

I'm sure I'm misinterpreting the manual (sorry about that), but I've been using "IndividualBasketTargetPips:"
For example I want a certain individual pair to reach 50 pips to close the trade
If it is not here, please where should I insert it?
If not here, then "IndividualBasketTargetPips" is the sum of pips of equal pairs?

Sorry again, but I'm confused.
Steve, you can call me stupid and stupid because I think I deserve it.
Cheers :hi:
RMSSC

Alexfirst · Post by **Alexfirst** » Thu Mar 26, 2020 8:39 am

RMSSC » Thu Mar 26, 2020 1:27 am wrote:Good evening everyone,
I need a charitable soul to help me, I don't want to abuse the intelligence of the members of this forum.
Technically my English is not the best and although.
I have read the manual several times I do not find a way to parameterize something that will certainly be simple but basically I must be very stupid because I cannot reach my configuration goals.
How should I parameterize Desky to make a hard stop for TP and SL for individual trades in pips, just as is allowed on the moving day.

I'm sure I'm misinterpreting the manual (sorry about that), but I've been using "IndividualBasketTargetPips:"
For example I want a certain individual pair to reach 50 pips to close the trade
If it is not here, please where should I insert it?
If not here, then "IndividualBasketTargetPips" is the sum of pips of equal pairs?

Sorry again, but I'm confused.
Steve, you can call me stupid and stupid because I think I deserve it.
Cheers :hi:
RMSSC

Go to section “Trade exit strategies”
Enter “TakeProfitValue” for TP and “StopLossValue” for SL
In “SLTPCalcMode” choose “FixedPips”

Gitarrain · Post by **Gitarrain** » Sat Mar 28, 2020 3:16 am

Hi Everyone,

I have been a new people for several days in SHF, Here is a problem on TDesk Drone as below:

I add three indicators by USD to send signals to TDesk, but it get three signal columns that I donot want as below picture, how can I get rid of them or make them disable?

I have tried to change setting on USD indicator, but it still not work, I think it is a code problem, but it is too complicated for me，so hope someone can give me a favor.

Cheers,
Gitarrain

RMSSC · Post by **RMSSC** » Sat Mar 28, 2020 10:23 am

Alexfirst » Thu Mar 26, 2020 8:39 am wrote:
RMSSC » Thu Mar 26, 2020 1:27 am wrote:Good evening everyone,
I need a charitable soul to help me, I don't want to abuse the intelligence of the members of this forum.
Technically my English is not the best and although.
I have read the manual several times I do not find a way to parameterize something that will certainly be simple but basically I must be very stupid because I cannot reach my configuration goals.
How should I parameterize Desky to make a hard stop for TP and SL for individual trades in pips, just as is allowed on the moving day.

I'm sure I'm misinterpreting the manual (sorry about that), but I've been using "IndividualBasketTargetPips:"
For example I want a certain individual pair to reach 50 pips to close the trade
If it is not here, please where should I insert it?
If not here, then "IndividualBasketTargetPips" is the sum of pips of equal pairs?

Sorry again, but I'm confused.
Steve, you can call me stupid and stupid because I think I deserve it.
Cheers :hi:
RMSSC
Go to section “Trade exit strategies”
Enter “TakeProfitValue” for TP and “StopLossValue” for SL
In “SLTPCalcMode” choose “FixedPips”

Thank you very much for your help, no doubt we have here a forum of exceptional people who are willing to help.
Health wishes for everyone at this difficult time that humanity is suffering. :hi:

Post by **SteveHopwood** » Sun Mar 29, 2020 7:28 pm

RMSSC » Sat Mar 28, 2020 10:23 am wrote:
Alexfirst » Thu Mar 26, 2020 8:39 am wrote:
RMSSC » Thu Mar 26, 2020 1:27 am wrote:Good evening everyone,
I need a charitable soul to help me, I don't want to abuse the intelligence of the members of this forum.
Technically my English is not the best and although.
I have read the manual several times I do not find a way to parameterize something that will certainly be simple but basically I must be very stupid because I cannot reach my configuration goals.
How should I parameterize Desky to make a hard stop for TP and SL for individual trades in pips, just as is allowed on the moving day.

I'm sure I'm misinterpreting the manual (sorry about that), but I've been using "IndividualBasketTargetPips:"
For example I want a certain individual pair to reach 50 pips to close the trade
If it is not here, please where should I insert it?
If not here, then "IndividualBasketTargetPips" is the sum of pips of equal pairs?

Sorry again, but I'm confused.
Steve, you can call me stupid and stupid because I think I deserve it.
Cheers :hi:
RMSSC
Go to section “Trade exit strategies”
Enter “TakeProfitValue” for TP and “StopLossValue” for SL
In “SLTPCalcMode” choose “FixedPips”
Thank you very much for your help, no doubt we have here a forum of exceptional people who are willing to help.
Health wishes for everyone at this difficult time that humanity is suffering. :hi:

Just so you know, I would not have called you an idiot here.TDesk and Desky are not easy pieces of kit to understand. I set up this thread so that the likes of you could ask this kind of question without fear. Well done for posting it here.

Post by **Wavegarrick** » Mon Mar 30, 2020 8:11 am

Gitarrain » Sat Mar 28, 2020 5:16 am wrote:Hi Everyone,

I have been a new people for several days in SHF, Here is a problem on TDesk Drone as below:

I add three indicators by USD to send signals to TDesk, but it get three signal columns that I donot want as below picture, how can I get rid of them or make them disable?

I have tried to change setting on USD indicator, but it still not work, I think it is a code problem, but it is too complicated for me，so hope someone can give me a favor.

Cheers,
Gitarrain

Hi Gitarrain,

Hopefully I can help you with one bit of the puzzle with regards to the Hgi caller set. Ensure that you have filled in the fields as per my yellow highlight on TDesk.

Cheers.

RMSSC · Post by **RMSSC** » Thu Apr 02, 2020 7:19 pm

Good evening,
I have at least eight demos working with Tdesk and desky, however in one of them I can't see the open trades and most pending trades on TDesk.
I think it will have to do with the magic number but I am very confused. In both experts the magic number is 0
Can the staff kindly explain to me what I am doing wrong?
Cheers

Post by **tomele** » Thu Apr 02, 2020 8:05 pm

Let me read the manual to you: "-1" means all.

RMSSC · Post by **RMSSC** » Thu Apr 02, 2020 8:59 pm

tomele » Thu Apr 02, 2020 8:05 pm wrote:Let me read the manual to you: "-1" means all.

Thank you Thomas, the answer says it all, I have a lot to learn about these wonderful tools and that leads me to say that i only know that I know nothing, but with precision I get there, I am not a person to give up anything.

Reading and rereading is the solution.
Cheers :hi:

seanb · Post by **seanb** » Fri Apr 03, 2020 12:54 pm

This is my first question in this group. I can't get the Trade Advise data for TP & SL to work. I've tried downloading the tick data and it still doesn't help. Anything you can suggest for me here?